Parting out '87 GN - Page 3

Sylvan · 08-14-2008, 07:07 PM

Quote:

Originally Posted by nos487

Pics and price for door panels. Shipped to 37618 and I have paypal.

Sorry, door panels have been taken apart already (not intact).

MAF and Scanmaster sold, THDP still available.

broke1 · 08-14-2008, 09:00 PM

Turbo,throttle body,and lower intake???

1 OFF GNX · 08-15-2008, 09:58 AM

Just wondering if you have goten the pic of the door panels chrome strips. Also how is the driver upper door panel.
Thanks Again Dave

Sylvan · 08-15-2008, 03:12 PM

Quote:

Originally Posted by 1 OFF GNX

Just wondering if you have goten the pic of the door panels chrome strips. Also how is the driver upper door panel.
Thanks Again Dave

The upper door panels are average (no rips or stains), the chrome strips are not available. Sorry.

Sylvan · 08-15-2008, 03:13 PM

Quote:

Originally Posted by broke1

Turbo,throttle body,and lower intake???

Turbo is gone and I'd rather sell the remainder of the engine as a whole. Sorry for not making that clear earlier.

1 OFF GNX · 08-15-2008, 09:01 PM

Hi would I be able to see a pic of the drivers side. Would you sell it seperately from the pair. How much did you want?
Thanks Again Dave

Sylvan · 08-16-2008, 04:46 PM

Getting it....

nos487 · 08-16-2008, 10:08 PM

How much for both uppers?

motorhead · 08-16-2008, 11:19 PM

Is the stall converter lock-up or non-lock-up?

Sylvan · 08-17-2008, 05:03 PM

Quote:

Originally Posted by motorhead

Is the stall converter lock-up or non-lock-up?

Non.

tony moore · 08-17-2008, 10:36 PM

so what's the deal with the engine and tranny? how do you want to sell them? is this your car? what color are your eyes? am i getting too personal?

Sylvan · 08-18-2008, 05:21 PM

Quote:

Originally Posted by tony moore

so what's the deal with the engine and tranny? how do you want to sell them? is this your car? what color are your eyes? am i getting too personal?

I would really prefer them to be intact and locally picked up. Maybe I'm dreaming, but I respect this car and it's breaking my heart to whore it out like this. I'm a Capricorn who likes walks on the beach and long talks about cattle mutilation and the search for other intelligent lifeforms...in New Jersey.

Sylvan · 08-18-2008, 05:46 PM

Upper door panels. I would prefer to sell as a pair.

1 OFF GNX · 08-18-2008, 09:05 PM

How much do you want for both.
Thanks Dave

tony moore · 08-21-2008, 10:17 PM

got my parts today. they are in good shape and arrived very fast, thanks sylvan!

pleasure to deal with you! i will call you tommorrow about the other stuff.

08-15-2008, 09:01 PM	#36 (permalink)
1 OFF GNX Registered User Join Date: Feb 2008 Location: Whitby Posts: 38	Grey upper door panels Hi would I be able to see a pic of the drivers side. Would you sell it seperately from the pair. How much did you want? Thanks Again Dave

08-16-2008, 04:46 PM	#37 (permalink)
Sylvan Smasher/Devourer Join Date: Jun 2007 Location: The Cold Dark Corner That Is Martyrdom Posts: 607	Getting it.... __________________ Photo by Brian Lynch

08-16-2008, 10:08 PM	#38 (permalink)
nos487 Registered User Join Date: Apr 2008 Location: Bristol, Tennessee Posts: 32	How much for both uppers? __________________ 84GN t-tops with 87 drivetrain, 60's TT chip, 340 hotwired, ls1 maf & translator, 3'' down pipe & single shot exhaust, . The rest is all faded, rusty and stock.

08-16-2008, 11:19 PM	#39 (permalink)
motorhead aka: mOtOrHeAd MiKe Join Date: Jan 2002 Location: Orangeville, Ontario Canada Posts: 4,591	Is the stall converter lock-up or non-lock-up? __________________ [1987 Monte Carlo Super Slow\|1991 Z28 SNOWmaro\|2002 B4C Crapmaro\|2007 TrailBlazer AWD Super SNOW] [1987 Turtle Buick] High-Mileage 3.8L (Stock), MAFT Pro, Caspers PnP Harness, Extender Pro, LC-1, PowerLogger, PowerPlate, Garrett T63e, Low-Z 83s, Modified International Semi FMIC, MPE 3" DP, 4" Single Exhaust w/Magnaflow, Dual In-tank Pumps, ProPain Injection, Built 200-4R w/3000 Stall, 8.5" w/Welded Axle Tubes & 3.08s, Tubular UCAs & Boxed LCAs F&R, 36mm 1LE & F41 Swaybars, KYBs, 800lb/in & 200lb/in Springs, Ronal R15 17x9.5s w/275/40s & 325/45 M&H Drag Radials & an HKS Turbo Timer... Just scratching the surface going 12.1 @ 113.27 w/1.79 60' (0-60mph in 3.8 seconds). HULK SMASH FOR GIIIIIIIFTS!

08-17-2008, 10:36 PM	#41 (permalink)
tony moore old skool Join Date: Feb 2004 Location: South carolina Posts: 3,717	so what's the deal with the engine and tranny? how do you want to sell them? is this your car? what color are your eyes? am i getting too personal? __________________ 86 grand national 2nd owner t tops, digital dash and few other options. bone stock no mods(yet!!) brought back from the dead. new paint and interior 85 regal t type clone, blue in and out , carb. turbo stock engine , no ecm, msd btm,holley blue fuel pump, 650 holley double pump carb. 3.73 gear with mini spool,all the gauges, stock trans and conv. slow but fun!!

08-14-2008, 09:00 PM	#32 (permalink)
broke1 TimeOut Join Date: Jan 2004 Posts: 1,156	Turbo,throttle body,and lower intake???

08-15-2008, 09:58 AM	#33 (permalink)
1 OFF GNX Registered User Join Date: Feb 2008 Location: Whitby Posts: 38	Just wondering if you have goten the pic of the door panels chrome strips. Also how is the driver upper door panel. Thanks Again Dave

08-18-2008, 05:46 PM	#43 (permalink)
Sylvan Smasher/Devourer Join Date: Jun 2007 Location: The Cold Dark Corner That Is Martyrdom Posts: 607	Upper door panels. I would prefer to sell as a pair. Attached Thumbnails __________________ Photo by Brian Lynch

08-18-2008, 09:05 PM	#44 (permalink)
1 OFF GNX Registered User Join Date: Feb 2008 Location: Whitby Posts: 38	Grey upper door panels How much do you want for both. Thanks Dave

08-21-2008, 10:17 PM	#45 (permalink)
tony moore old skool Join Date: Feb 2004 Location: South carolina Posts: 3,717	got my parts today. they are in good shape and arrived very fast, thanks sylvan! pleasure to deal with you! i will call you tommorrow about the other stuff. __________________ 86 grand national 2nd owner t tops, digital dash and few other options. bone stock no mods(yet!!) brought back from the dead. new paint and interior 85 regal t type clone, blue in and out , carb. turbo stock engine , no ecm, msd btm,holley blue fuel pump, 650 holley double pump carb. 3.73 gear with mini spool,all the gauges, stock trans and conv. slow but fun!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
parting out 87 gn	art442	Parts For Sale	7	07-13-2008 08:36 AM
parting out 87 buick gn	redvortech	Parts For Sale	23	06-09-2008 07:10 AM
Parting out 87 GN	turbo heaven	Parts For Sale	30	05-04-2008 10:21 PM
Parting out 87 GN in NJ	BAD87BUICK	Parts For Sale	15	02-04-2007 11:00 PM
Everything must go parting 87 GN	CLyons	Parts For Sale	0	03-01-2004 10:52 AM