Here it goes, 86/87 engine for parts

Madcat455 · 05-06-2008, 08:17 AM

Basically.... everything in the pic is for sale, except for the accessories (YET).

Enging has a broken crank at 1&2, just snapped so no metal went through it incase any internals are wanted.

Stock rebuilt turbo, not many miles, no smoke or play= $200
Powder coated cover cut for THDP (driver quality)= $40 PENDING
SMC non progressive alky kit w/up pipe, worked perfect= $250
Trans+ PENDING

LT1 MAF, worked perfect= $50
Intercooler&shroud, some fin damage but no leaks= $75
MSD 50lb injectors and new TT alky chip= $250
RJC power plate, stock plenum, not many miles= $20PENDING
RJC boost controller= $20PENDING
Factory ECM, ran great= $100
Exhaust manifolds, no cracks, driver side threads for crossover are stripped though=$75
Coil & Ign module, ran great= $100
billett vac block for Vac. brakes= $20PENDING
Cam sensor, needs cap, worked fine= $40
Chrome MAF pipe, driver quality some scratches= $20PENDING
Stock up pipe= $10
Direct scan worked great= $100
Laptop stand= $75PENDING
Intercooler fan, Great= $50

Anything else you can think of, just ask... I'm sure I'll add some stuff as I tear it down. Not sure what the internals, heads, valve covers, etc. are worth, so make an offer.

shipping extra, send me your ZIP for a quote. Open to offers as well.

Here are some pics of when it was assembled, it's somewhat torn down currently.

Laptop stand:

Thanks,

Jeff

6cess · 05-06-2008, 12:07 PM

Jeff, When you part out the motor I would be interested in the intake manifold. Just the itake no doghouse etc... Thnaks...Jeff.

Madcat455 · 05-06-2008, 12:51 PM

Quote:

Originally Posted by 6cess

Jeff, When you part out the motor I would be interested in the intake manifold. Just the itake no doghouse etc... Thnaks...Jeff.

It's yours then, I'll probably start ripping stuff this Sunday or Next Sunday (my only day off...lol). Maybe sooner if things keep selling at this pace. It's not that hard to pull the intake.

Make me an offer, and send me your zip so I can get a shipping est.

Thanks,

Jeff

buickrob · 05-06-2008, 12:57 PM

I'd like the Chrome MAF pipe with the hoses and clamps. Shipped to 07419?

Thanks,

Rob

Madcat455 · 05-06-2008, 01:09 PM

Quote:

Originally Posted by buickrob

I'd like the Chrome MAF pipe with the hoses and clamps. Shipped to 07419?

Thanks,

Rob

MAF pipe is pending already, I'll put you as #2 if it falls through.

Thanks,

BoostedEvIL · 05-06-2008, 04:45 PM

PM'd you.

buickrob · 05-06-2008, 09:37 PM

Quote:

Originally Posted by Madcat455

MAF pipe is pending already, I'll put you as #2 if it falls through.

Thanks,

OK thanks, just let me know.

mrneg9 · 05-07-2008, 12:53 AM

Would you happen to have a scan master lying around ?

Madcat455 · 05-07-2008, 08:09 AM

Quote:

Originally Posted by mrneg9

Would you happen to have a scan master lying around ?

No... I used Direct scan with a laptop.

That's for sale if you want, $250 with the laptop.

buickrob · 05-08-2008, 09:29 AM

I want to go Alky this summer, how did this system run for you? Have the SMC dash mounted controller?

Did the buyer fall through for the MAF pipe? I can hope ya know

Madcat455 · 05-08-2008, 11:03 AM

Quote:

Originally Posted by buickrob

I want to go Alky this summer, how did this system run for you? Have the SMC dash mounted controller?

Did the buyer fall through for the MAF pipe? I can hope ya know

LOL... Worked great for me, and it's the dash mounted Non progressive controller.

I "MAY" have someone buying it too, I'm supposed to hear from him tonight (since he want's to pick it up this weekend). But you never know.

Thanks,

Jeff.

Madcat455 · 05-08-2008, 11:15 AM

Quote:

Originally Posted by Madcat455

Enging has a broken crank at 1&2, just snapped so no metal went through it incase any internals are wanted.

Stock rebuilt turbo, not many miles, no smoke or play= $200
SMC non progressive alky kit w/up pipe, worked perfect= $250PENDING
LT1 MAF, worked perfect= $50
Intercooler&shroud, some fin damage but no leaks= $75
Factory ECM, ran great= $100
Exhaust manifolds, no cracks, driver side threads for crossover are stripped though=$75PENDING
Coil & Ign module, ran great= $100
Cam sensor, needs cap, worked fine= $40
Direct scan worked great= $100PENDING
Intercooler fan, Great= $50

Anything else you can think of, just ask... I'm sure I'll add some stuff as I tear it down. Not sure what the internals, heads, valve covers, etc. are worth, so make an offer.

shipping extra, send me your ZIP for a quote. Open to offers as well.

Updated.

Going to be adding a barely used Walboro 340 & Hangar soon too. Whenever the NA one gets here to swap it out. Say $150

Thanks

Blacktree · 05-09-2008, 08:48 PM

Just out of curiosity, does it have a stock throttle body? And if so, would you be willing to sell it? I live in Kissimmee, Florida... zip code 34744. Thanks.

Madcat455 · 05-09-2008, 10:09 PM

Quote:

Originally Posted by Blacktree

Just out of curiosity, does it have a stock throttle body? And if so, would you be willing to sell it? I live in Kissimmee, Florida... zip code 34744. Thanks.

Yes, and Yes... Someone PM'd me this morning about it, I'm waiting to hear back from them if they want it or not.

If they don't want it I'll let you know.

Thanks,

Jeff

84BuickGNYorkPA · 05-09-2008, 10:37 PM

Jeff,

I just have to ask, what happened that the crank broke? Where you making a run? Any detonation?

Chuck

05-06-2008, 08:17 AM	#1 (permalink)
Madcat455 Need....more...ammo!!! Join Date: Nov 2006 Location: SW FL Posts: 413	Here it goes, 86/87 engine for parts Basically.... everything in the pic is for sale, except for the accessories (YET). Enging has a broken crank at 1&2, just snapped so no metal went through it incase any internals are wanted. Stock rebuilt turbo, not many miles, no smoke or play= $200 Powder coated cover cut for THDP (driver quality)= $40 PENDING SMC non progressive alky kit w/up pipe, worked perfect= $250 Trans+ PENDING LT1 MAF, worked perfect= $50 Intercooler&shroud, some fin damage but no leaks= $75 MSD 50lb injectors and new TT alky chip= $250 RJC power plate, stock plenum, not many miles= $20PENDING RJC boost controller= $20PENDING Factory ECM, ran great= $100 Exhaust manifolds, no cracks, driver side threads for crossover are stripped though=$75 Coil & Ign module, ran great= $100 billett vac block for Vac. brakes= $20PENDING Cam sensor, needs cap, worked fine= $40 Chrome MAF pipe, driver quality some scratches= $20PENDING Stock up pipe= $10 Direct scan worked great= $100 Laptop stand= $75PENDING Intercooler fan, Great= $50 Anything else you can think of, just ask... I'm sure I'll add some stuff as I tear it down. Not sure what the internals, heads, valve covers, etc. are worth, so make an offer. shipping extra, send me your ZIP for a quote. Open to offers as well. Here are some pics of when it was assembled, it's somewhat torn down currently. Laptop stand: Thanks, Jeff __________________ Last edited by Madcat455 : 05-06-2008 at 01:11 PM.

05-06-2008, 12:07 PM	#2 (permalink)
6cess Ponies Are For Lil Girls. Join Date: Nov 2006 Location: NYC Posts: 358	Jeff, When you part out the motor I would be interested in the intake manifold. Just the itake no doghouse etc... Thnaks...Jeff. __________________ 1986 GN AKA Psycho 6 Usual mods and a lil more.. 1965 Skylark Factory A/C Ps. The new project..

05-07-2008, 12:53 AM	#8 (permalink)
mrneg9 Registered User Join Date: Feb 2008 Posts: 12	Hey Jeff Would you happen to have a scan master lying around ?

05-09-2008, 10:37 PM	#15 (permalink)
84BuickGNYorkPA Just a 6 Banger Join Date: Jun 2005 Location: York PA Posts: 1,514	Jeff, I just have to ask, what happened that the crank broke? Where you making a run? Any detonation? Chuck __________________ P.Logger/SM2.2,LC-1 wideband,RJC(FMIC,plenum plate), "F" body Aluminum Radiator,dual fans, with upgraded wiring, turbosaver, billet packed tranny,security collar,welbro fuel pump,hot wire kit, accufab regulator,SS fuel lines, TTchip,Razor's Alky, 50#PTE Inj.,PTE-44,port/polished hds. 208/208 cam,3"SS HyeTech DP w/38mm tial,3" dual with 3" dump/electric cut out,9.5 Vigilante LU, UMI uppers/lowers,HR sway bar,line lock, polished Aluminum Centerline's, M/T DR's 11.71 @ 114.39 @ 25#'s MAGNA ;) Building: stk block, .02/.02 crank, King Bearings, .04 Diamond's, rjc girdle.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-06-2008, 12:57 PM	#4 (permalink)
buickrob Registered User Join Date: Apr 2008 Posts: 12	I'd like the Chrome MAF pipe with the hoses and clamps. Shipped to 07419? Thanks, Rob

05-06-2008, 04:45 PM	#6 (permalink)
BoostedEvIL Resident Novice Join Date: Dec 2006 Location: NorCal Posts: 19	PM'd you.

05-08-2008, 09:29 AM	#10 (permalink)
buickrob Registered User Join Date: Apr 2008 Posts: 12	I want to go Alky this summer, how did this system run for you? Have the SMC dash mounted controller? Did the buyer fall through for the MAF pipe? I can hope ya know

05-09-2008, 08:48 PM	#13 (permalink)
Blacktree Registered User Join Date: May 2008 Posts: 1	Just out of curiosity, does it have a stock throttle body? And if so, would you be willing to sell it? I live in Kissimmee, Florida... zip code 34744. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
30W for break in?.....	disco stu	Buick V6 Turbo Tech	13	06-24-2005 08:06 AM
86/87 Interior, Exterior, Engine & Brake Parts for Sale	87 WE2	Parts For Sale	2	01-04-2005 08:01 AM
86/87 gn engine for sale	grandrt	Parts For Sale	7	10-25-2004 07:28 AM
Ecm Id#	87 WE2	Buick V6 Turbo Tech	3	02-13-2004 01:24 PM
84/87 Turbo Regal Parts For Sale (UPDATED)	87 WE2	Parts For Sale	0	08-12-2002 05:21 AM