GIANT parts list, stock, performance, audio, etc...

turbo_canuck · 07-26-2005, 05:25 PM

Here's what i got:

86/87 parts:

-Stock crossover pipe-$ 35
-stock intercoolers (3) - $80 each
-turbo heat shields (2) - $30 each
-3.42 richmond gears - $90
-stock intercooler shrouds (3) - $25 each
-stock exhaust elbows (2) - $10 each
-stock inlet bells (2) - $5 each
-stock up pipe - $25
-stock wastegate actuator (3) $15 each
-turbo brackets (2) $15 each
-quarter panel extensions pair (non spoiler) - $20
-clear parking lenses - $15
-stock posi rear - $800
-stock turbo cores - $90 each
-stock front sway bar - $40
4 stock t-type wheels w/ caps - $275
front GN bumper - $100
pair gn lower door panels- $60
complete engine harness - $250
4 GN wheels w/ new caps- $300
2 85 gn wheels with broken center rings (good for slicks) - $100
stock gn valve covers - $60
stock dowmpipe (2) $20 each
stock fuel pressure regulators (3) $20 each
cut chrome turbo shield - $75
stock ECM - $75
a/c lines - $50
2 stock turbo cranks - $300 each
Blower motor- $50
Flexplates (2) - $35 ea.
Throttle body and plenum, no arm, spring or iac- $ 125
Cruise control unit- $ 40
EGR valve and solenoid- $ 50
Stock shifter- $ 30
Right side air dam- $ 25

PERFORMANCE PARTS:

March underdrive pulley kit w/intercooler fan- $120
Chrome moly stock length pushrods- $50
B+M line lock- new- $60
Pair of mint redone GTA rears- $ 225
New heated 02 sensor kit- $80
204/214 speed pro hyd. cam - $75
.030 speed pro forged pistons - $200
Pair of 8.5" vectors, centers painted black, holes drilled for screws- $175
Pair of 8.5" vectors, good shape, $250
Set of centerline auto drag high polished wheels, 2 15x7, 2 15x8.5 like new- $550
ls1 maf sensor - $85
Kirban variable rate rear springs- $60
red's double pumper w/ switch - $425, used for 2 months, track time only
4.10 richmond gears - $125
B+M torquemaster torque- 2800-3200 stall, th350,th400- $200

84/85 PARTS:

complete intake - $90
turbo/ throttle body assy. (core) - $80
engine accessory bracket - $25
braided down pipe - $20

INTERIOR:

Green Steering wheel- $80
grey dash pad - $$80
rear quarter window trim - $15 pr.
3rd brake light - $5 each
a-pillars for t-tops - $10
t-top wide front trim - $10

CAR AUDIO:
Alpine CDM-7861 flip face cd player- $150
Alpine CDA7863 flip face cd player- $ 190
MTX thunder4122 2 channel amp- $ 100
Memphis mono amp 16pr1kd- $ 250
Clarion 15"xw series sub in box- $250

FRESH LONGBLOCK ---4 RUNS:

10/10 stock turbo crank
billet center mains
RJC girdle
stock checked + magged rods w/ ARP bolts
.030 forged speed pro pistons, moly rings
comp cams 212-212 hydraulic roller cam + lifters, roller cam button
comp "beehive" springs, retainers, and locks
rollmaster timing set
comp hi-tec pushrods
hi-volume front cover
RJC head gasket kit
Fully race ported iron heads
manley severe duty stainless valves 1.77/1.50
t+d shaft mount roller rockers

cost me over $5000 u.s to build, sell for $4000, only 4 runs on it!!!

scooter135 · 07-27-2005, 06:50 AM

You have a PM

clv8s10 · 07-27-2005, 09:55 AM

I'll take the clear lenses if you still have them? Do you take paypal? What would shipping be to so.wisconsin zip code 53546? Thanks.

turbo_canuck · 07-27-2005, 09:59 AM

clear lenses are pending sale...

Antagon · 07-27-2005, 02:20 PM

I may take an intercooler scoop pending my other sale.

Antagon · 08-05-2005, 12:11 PM

Still alive?

underpressure2 · 08-05-2005, 05:29 PM

still have a turbo bracket?

turbo_canuck · 08-05-2005, 06:16 PM

Yeah guys, still alive. I was in mass for a couple of days getting my FAST installed at cotton's. underpressure2, i do have one bracket left, interested?

Antagon · 08-06-2005, 03:41 PM

I'll take an intercooler shroud as long as it's complete.

Slow T · 08-07-2005, 10:49 AM

Do you have any heater controls?
Non electonic, just plain jane with A/C

turbo_canuck · 08-07-2005, 07:26 PM

Antagon, sorry, the only shroud i have left is held together with zip-ties. Slow T, i'll check on monday, and get back to u.

Slow T · 08-07-2005, 07:38 PM

Sounds good

turbo_canuck · 08-24-2005, 06:20 PM

2 stock ic's- sold
chrome turbo shield-sold
front swaybar-sold
gn rear end- sold

slow-t, sorry i didn't get back to u sooner, i've been laid up with a knee injury. i don't have the heater controls.

built2run · 08-25-2005, 05:00 PM

still have the RA double pumper

turbo_canuck · 08-25-2005, 07:12 PM

Sorry, just sold it today
Double pumper -sold-
stock up-pipe -sold-
quarter extensions, non spoiler -sold-
all wastegate rods -sold-

07-26-2005, 05:25 PM	#1 (permalink)
turbo_canuck Registered User Join Date: Jul 2004 Posts: 138	GIANT parts list, stock, performance, audio, etc... Here's what i got: 86/87 parts: -Stock crossover pipe-$ 35 -stock intercoolers (3) - $80 each -turbo heat shields (2) - $30 each -3.42 richmond gears - $90 -stock intercooler shrouds (3) - $25 each -stock exhaust elbows (2) - $10 each -stock inlet bells (2) - $5 each -stock up pipe - $25 -stock wastegate actuator (3) $15 each -turbo brackets (2) $15 each -quarter panel extensions pair (non spoiler) - $20 -clear parking lenses - $15 -stock posi rear - $800 -stock turbo cores - $90 each -stock front sway bar - $40 4 stock t-type wheels w/ caps - $275 front GN bumper - $100 pair gn lower door panels- $60 complete engine harness - $250 4 GN wheels w/ new caps- $300 2 85 gn wheels with broken center rings (good for slicks) - $100 stock gn valve covers - $60 stock dowmpipe (2) $20 each stock fuel pressure regulators (3) $20 each cut chrome turbo shield - $75 stock ECM - $75 a/c lines - $50 2 stock turbo cranks - $300 each Blower motor- $50 Flexplates (2) - $35 ea. Throttle body and plenum, no arm, spring or iac- $ 125 Cruise control unit- $ 40 EGR valve and solenoid- $ 50 Stock shifter- $ 30 Right side air dam- $ 25 PERFORMANCE PARTS: March underdrive pulley kit w/intercooler fan- $120 Chrome moly stock length pushrods- $50 B+M line lock- new- $60 Pair of mint redone GTA rears- $ 225 New heated 02 sensor kit- $80 204/214 speed pro hyd. cam - $75 .030 speed pro forged pistons - $200 Pair of 8.5" vectors, centers painted black, holes drilled for screws- $175 Pair of 8.5" vectors, good shape, $250 Set of centerline auto drag high polished wheels, 2 15x7, 2 15x8.5 like new- $550 ls1 maf sensor - $85 Kirban variable rate rear springs- $60 red's double pumper w/ switch - $425, used for 2 months, track time only 4.10 richmond gears - $125 B+M torquemaster torque- 2800-3200 stall, th350,th400- $200 84/85 PARTS: complete intake - $90 turbo/ throttle body assy. (core) - $80 engine accessory bracket - $25 braided down pipe - $20 INTERIOR: Green Steering wheel- $80 grey dash pad - $$80 rear quarter window trim - $15 pr. 3rd brake light - $5 each a-pillars for t-tops - $10 t-top wide front trim - $10 CAR AUDIO: Alpine CDM-7861 flip face cd player- $150 Alpine CDA7863 flip face cd player- $ 190 MTX thunder4122 2 channel amp- $ 100 Memphis mono amp 16pr1kd- $ 250 Clarion 15"xw series sub in box- $250 FRESH LONGBLOCK ---4 RUNS: 10/10 stock turbo crank billet center mains RJC girdle stock checked + magged rods w/ ARP bolts .030 forged speed pro pistons, moly rings comp cams 212-212 hydraulic roller cam + lifters, roller cam button comp "beehive" springs, retainers, and locks rollmaster timing set comp hi-tec pushrods hi-volume front cover RJC head gasket kit Fully race ported iron heads manley severe duty stainless valves 1.77/1.50 t+d shaft mount roller rockers cost me over $5000 u.s to build, sell for $4000, only 4 runs on it!!!

07-27-2005, 06:50 AM	#2 (permalink)
scooter135 Registered User Join Date: Apr 2005 Location: Tampa, FL Posts: 395	You have a PM __________________ 87 GN 13.716@101.33(on street tires and 17psi boost(alky was broke )) 99 30th Trans AM(new toy) 1/8th 9.2@81.3 darn 6 speed

08-25-2005, 05:00 PM	#14 (permalink)
built2run Registered User Join Date: Jul 2003 Location: Fl Posts: 19	fuel still have the RA double pumper

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-27-2005, 09:55 AM	#3 (permalink)
clv8s10 Registered User Join Date: Jul 2005 Location: Janesville Wi. Posts: 17	I'll take the clear lenses if you still have them? Do you take paypal? What would shipping be to so.wisconsin zip code 53546? Thanks.

07-27-2005, 09:59 AM	#4 (permalink)
turbo_canuck Registered User Join Date: Jul 2004 Posts: 138	clear lenses are pending sale...

07-27-2005, 02:20 PM	#5 (permalink)
Antagon Registered User Join Date: Apr 2005 Posts: 514	I may take an intercooler scoop pending my other sale.

08-05-2005, 12:11 PM	#6 (permalink)
Antagon Registered User Join Date: Apr 2005 Posts: 514	Still alive?

08-05-2005, 05:29 PM	#7 (permalink)
underpressure2 86 gn flyin! Join Date: Jul 2005 Location: south burbs of chicago Posts: 33	still have a turbo bracket?

08-05-2005, 06:16 PM	#8 (permalink)
turbo_canuck Registered User Join Date: Jul 2004 Posts: 138	Yeah guys, still alive. I was in mass for a couple of days getting my FAST installed at cotton's. underpressure2, i do have one bracket left, interested?

08-06-2005, 03:41 PM	#9 (permalink)
Antagon Registered User Join Date: Apr 2005 Posts: 514	I'll take an intercooler shroud as long as it's complete.

08-07-2005, 10:49 AM	#10 (permalink)
Slow T 1 of 1547 Join Date: Jul 2002 Location: Ridgefield WA, U.S.A Posts: 606	Do you have any heater controls? Non electonic, just plain jane with A/C

08-07-2005, 07:26 PM	#11 (permalink)
turbo_canuck Registered User Join Date: Jul 2004 Posts: 138	Antagon, sorry, the only shroud i have left is held together with zip-ties. Slow T, i'll check on monday, and get back to u.

08-07-2005, 07:38 PM	#12 (permalink)
Slow T 1 of 1547 Join Date: Jul 2002 Location: Ridgefield WA, U.S.A Posts: 606	Sounds good

08-24-2005, 06:20 PM	#13 (permalink)
turbo_canuck Registered User Join Date: Jul 2004 Posts: 138	2 stock ic's- sold chrome turbo shield-sold front swaybar-sold gn rear end- sold slow-t, sorry i didn't get back to u sooner, i've been laid up with a knee injury. i don't have the heater controls.

08-25-2005, 07:12 PM	#15 (permalink)
turbo_canuck Registered User Join Date: Jul 2004 Posts: 138	Sorry, just sold it today Double pumper -sold- stock up-pipe -sold- quarter extensions, non spoiler -sold- all wastegate rods -sold-