TurboBuicks.com  

Go Back   TurboBuicks.com > Swap Meet > Parts For Sale

Reply
 
LinkBack Thread Tools Display Modes
Old 07-19-2005, 11:27 AM   #1 (permalink)
MSA231V6
Registered User
 
Join Date: Jul 2005
Location: Okemos, MI
Posts: 89
FS: Stock/aftermarket parts, wheels/tires, radio equip.

A massive "cleaning up" project is underway at the garage several of us use. Listed below is a decent-sized listing of parts currently for sale. Most of the smaller items are in Michigan and can be shipped the next day after a purchase is made. Larger items are in Delaware and shipping can be coordinated from there if you are interested in something. Not too many pictures of stuff at this point, but it might be possible to set that up. The descriptions of the parts are legit, not trying to sell any junk. If you don't know about something, ask a question.

Payment: Because the parts are from 2-3 people, we'd prefer PayPal, cash or money order. All prices are with shipping not included. Shipping will be from 48864 or 19707.

Because of the sheer volume of this stuff (didn't think we had this much!) we just threw some prices on the parts. All prices are negotiable. Please email or PM if you are serious.

Contacts will be Michael Armstrong (MSA231V6@comcast.net) and/or Banning Cohen (banning@banningcohen.com).

Here goes...

---------------------------------------
WHEELS AND TIRES
---------------------------------------
(2) Centerline Convo Pro Wheels [Sales Pending]
15x10, 5” Backspacing, Drilled
Price: $340/pair

(2) Centerline Convo Pro Wheels
15x10, 5” Backspacing, Undrilled
Price: $350/pair

(2) Centerline Convo Pro Wheels
15x7, 3-3/8” Backspacing, Undrilled
Price: $250/pair

(2) American Racing Outlaw Wheels
15x8, 3-1/2” Backspacing, Drilled
Price: $100/pair

(2) American Racing Outlaw Wheels
15x8, 3-1/2” Backspacing, Undrilled
Price: $120/pair

(2) Firestone Drag Slicks
28.5x10.5x15, Used, but good tread
Price: $100/pair

(2) Moroso Drag Special Frontrunners
28x7 (approximate), Low use
Price: $170/pair

(2) BF Goodrich Euro T/A Radials
305/50/15, Less than 50 miles
Price: $175/pair

(2) BF Goodrich Comp T/A Radials
205/60/15, Less than 50 miles
Price: $120/pair

(3) Factory Spare Tires & Wheels
Price: $30/each

---------------------------------------
DRIVE TRAIN/SUSPENSION
---------------------------------------
(1) Drive Shaft – 3”, Aluminum [Sale Pending]
Never used
Price: $275

(1) Drive Shaft (Stock)
Price: $40

(1) Transmission, 200R4
Fresh DelTrans Race Rebuild, 0 miles
Price: $1050

(1) Rear End, 8.5” (Complete drum to drum)
28 Spline Moser C-Clip Eliminator Axles, S10 Brake Pistons
TA Performance Rear End Cover, Southside Lower Control Arms
Price: $1200

(1) Pro-traction Adjustable Upper Control Arms, Pair
Price: $175/pair

(1) Rear Coil Springs, with Air Bags, Pair
New replacement springs, limited use, air bags intact with feed line
Price: $80

(2) Front Sway Bars (Stock)
Price: $20/each

(1) Axles, Pair (Stock)
Price: $40/each or $75/pair

---------------------------------------
ENGINE/UNDER HOOD
---------------------------------------

(1) 3” Polished Turbo Intake Housing
.60 A/R, Never used (fits 60 series turbo)
Price: $75

(1) Factory Passenger Side Fender-well Inner Liner
Excellent Condition. No cracks, scrapes, etc.
Price: $325

(3) Radiators (Stock)
Good for cores if sending somewhere like Holm's Radiator for recore.
Price: $30/each

(2) Factory Fuel Pressure Regulator 90-degree Hard Line
Price: $10/each

(1) Billet Bosch 233 Billet Top Fuel Pressure Regulator
Price: $50

(1) Stock-appearing (adjustable) Bosch 233 Fuel Pressure Regulator
Adjustable via set screw inside top vaccum port.
Price: $50

(1) GM A/C Delete Pulley/Bracket
Price: $30

(1) Precision .63 Turbo Exhaust Housing
Fits on P-trim Exhaust Wheel
Price: $75

(1) Aluminum Engine Accessory Bracket
Jet Hot Coated, holds on A/C and Power Steering
Price: $50

(1) Flow Kooler High Volume Water Pump
Clean, very low use
Price: $40

(1) A/C Condenser
Price: $20

(1) Harmonic Balancer (Stock)
Price: $30

(1) Flywheel (Stock)
Price: $30

(1) Wategate Actuator (Adjustable)
Price: $30

(1) Wategate Actuator (Non-adjustable)
Price: $15

(2) Crank Pulley, with Fan Adapter (Stock)
Price: $30/each

(1) Tensioner/Idler Pulley (Stock)
Price: $70

(1) Battery Hold-down, with Chrome Cover
Price: $15

(1) Turbo Shield
Chrome, modified for 3" DP
Price: $25

(1) Turbo Shield
Stock, modified for 3" DP and exhaust housing mounted external gate
Price: $15

(1) Factory Intercooler Up-Pipe (Stock)
Price: $20

(1) Fuel Injector Harness (Stock)
Price: $40

(1) EGR Solenoid
Price: $10

(1) Master Cylinder Cover, Chrome
Price: $10

(2) Oil Filter Adapters, with Oil Cooler Lines
Price: $45/each

(1) Downpipe (Stock)
Price: $20

(1) Catalytic Converter (Stock)
Price: $20

(1) Heater Control Valve, with Full Manifold Piping
Price: $25

(1) S-Hose Kit
Dennis Kirban, new in bag
Price: $40

(1) Front Air Dam Set.
Passenger side stock dam, drivers side is fiberglass replica with cold air intake. Includes hose.
Price: Driver - $75, Passenger - $40 or $100/pair

(1) Washer Jug (Stock, very good condition)
Price: $10

(3) Turbo Bracket (holds turbo to engine), stock
Price: $15/each

(1) Factory Plastic EGR Cover
Price: $10

(1) Chrome EGR Cover Overlay
Price: $15

(1) Facyory Transmission Dipstick with tube (Stock)
Price: $20

---------------------------------------
ELECTRICAL/ACCESSORIES
---------------------------------------

(1) Subwoofer Box
Dual Bandpass with two 10” Eclipse Subwoofers
Price: $80

(1) Subwoofer Box
Dual Bandpass with 10” MTX Blue Thunder Subwoofer
Custom-made, fits under rear shelf of turbo Buick
Price: $150

(1) Radio Head Unit (Stock)
Price: $40

(1) Radio Head Unit, Eclipse Model ECD415
Price: $125

(1) Eclipse 4x10 Speakers, Model 3403 – Pair
Price: $50/pair

(1) MTX Round Tweeters – Pair
Price: $30

(1) Pioneer 6x9 Speakers – Pair
Price: $75

(1) Sony Amplifier, 45x2 Watt
Price: $50

(1) MTX Amplifier, 80x2 Watt
Price: $75

(1) Kenwood Amplifier, 55x2 Watt
Price: $60

---------------------------------------
MISCELLANEOUS
---------------------------------------
(1) 3” Single Shot Exhaust - Bobby Simms (Action Fabrication)
Custom-made, Full Stainless with ATR Pit Bull Muffler, Polished Tip
Excellent condition, very low use, bolts on to test pipe (not included); includes 3” band clamp
Price: $350

(1) Set of Factory Sunvisors (Gray), well worn, need re-covering
Price: $20

(1) Factory 1986 T-Type Grille.
Price: $50

(1) Lower Quarter Sail Trim - Pair (Gray)
Good condition
Price: $40/each, $75/pair

(1) Rear Seat Lower Cushion (Gray)
Price: $50

(1) Rear Seat Back Cushion (Gray)
Price: $25

(1) Rear Aluminum Bumper Brackets (for fiberglass rear bumper)
Price: $60/pair

(1) Rear Bumper Shell, Chrome
Price: $75

(1) Rear Aluminum Bumper Support
Price: $75

(2) Factory Jack Kits (Stock)
Price: $30/each

(2) Suspension Bushings (New in bag)
Price: $10/pair

(2) Tie Rod Ends (New in bag)
Price: $10/pair

(1) 200R4 Transmission Cross-member Mount (Stock)
Price: $10

(1) High Volume Fuel Pump, Factory Sending Unit & Hanger
Fuel pump appears to be Red Armstrong pump.
Price: $75

(1) 340 Fuel Pump, Sending Unit & MODIFIED Fuel Pump Hanger
Hanger modified for a second feed line (for external pump)
Price: $75

(2) Fuel Pump Hard Lines
Connects sending unit to stock fuel lines
Price: $20/each

(1) McGuard Lug Nuts for aftermarket wheels, miscellaneous sizes
Price: $1/each (you pick – can match up with washers, etc…)

---------------------------------------
BRAKES
---------------------------------------
(1) Power Master Brake Unit (Complete)
Price: TBD or Make Offer

(1) Front Brake Line with Proportioning Valve
Includes jumper valve (one broken electric terminal)
Price: TBD or Make Offer

Last edited by MSA231V6; 07-20-2005 at 01:20 AM. Reason: sold part
MSA231V6 is offline   Reply With Quote
Old 07-19-2005, 12:09 PM   #2 (permalink)
J Banning
www.magnabuick.com
 
J Banning's Avatar
 
Join Date: Sep 2001
Location: Wilmington, DE
Posts: 6,524
I can vouch for these parts (and the seller)... especially since some of the parts are mine
__________________
Banning Cohen
1986 T-Type WH1
10.62@125.45 (1.43 best 60')

Mid-Atlantic Grand National Association (MAGNA)
Club Director & Delaware State Rep.

**Sign up for the 2010 MAGNA Points Series**

Someday this all might come together: Girdled 109 stroker, 76GTQ 4-bolt turbo, Bronsonian Stage IV heads, 83's and Razor's dual nozzle, Turbotweak Speed Density w/WBo2 control, Powerstroke IC, Michael's TH400 w/transbrake, 33 spline Mosers & full spool, 325/50/15 drag radials.
J Banning is offline   Reply With Quote
Old 07-19-2005, 03:08 PM   #3 (permalink)
scooter135
Registered User
 
scooter135's Avatar
 
Join Date: Apr 2005
Location: Tampa, FL
Posts: 395
You have a PM
__________________
87 GN 13.716@101.33(on street tires and 17psi boost(alky was broke ))

99 30th Trans AM(new toy) 1/8th 9.2@81.3 darn 6 speed
scooter135 is offline   Reply With Quote
Old 07-21-2005, 12:08 AM   #4 (permalink)
GN(Good News)
Registered User
 
GN(Good News)'s Avatar
 
Join Date: Jan 2005
Location: SW MI
Posts: 76
parts for sale

Hi,
I will buy the A/C delete pulley for $30
the chrome turbo sheild for $15
and the chrome EGR cover for $15
Just let me know your paypal account to make payment.
Thanks ........... B Jones
GN(Good News) is offline   Reply With Quote
Old 07-21-2005, 04:16 AM   #5 (permalink)
MSA231V6
Registered User
 
Join Date: Jul 2005
Location: Okemos, MI
Posts: 89
parts

Quote:
Originally Posted by GN(Good News)
Hi,
I will buy the A/C delete pulley for $30
the chrome turbo sheild for $15
and the chrome EGR cover for $15
Just let me know your paypal account to make payment.
Thanks ........... B Jones
PM sent.
MSA231V6 is offline   Reply With Quote
Old 07-23-2005, 10:45 AM   #6 (permalink)
MSA231V6
Registered User
 
Join Date: Jul 2005
Location: Okemos, MI
Posts: 89
link w/ pics

Here is a link to some pics. Taken with a camera phone, but not too bad.

-- Michael

http://www.banningcohen.com/buick/parts/
MSA231V6 is offline   Reply With Quote
Old 08-06-2005, 06:39 PM   #7 (permalink)
MSA231V6
Registered User
 
Join Date: Jul 2005
Location: Okemos, MI
Posts: 89
TTT...

Many parts still available.
MSA231V6 is offline   Reply With Quote
Old 08-06-2005, 10:50 PM   #8 (permalink)
GN(Good News)
Registered User
 
GN(Good News)'s Avatar
 
Join Date: Jan 2005
Location: SW MI
Posts: 76

Michael,
I didn't receive the PM you sent.
I still want to puchase the above items.
I will email you also.
Thanks ............. B Jones
GN(Good News) is offline   Reply With Quote
Old 08-06-2005, 11:30 PM   #9 (permalink)
MSA231V6
Registered User
 
Join Date: Jul 2005
Location: Okemos, MI
Posts: 89
Quote:
Originally Posted by GN(Good News)

Michael,
I didn't receive the PM you sent.
I still want to puchase the above items.
I will email you also.
Thanks ............. B Jones
Hmmm. Not sure what happened there - that is going back a few weeks now. In any case, those parts are no longer for sale. I apologize if the communication did not occur in a timely manner.

Michael
MSA231V6 is offline   Reply With Quote
Old 08-07-2005, 07:30 AM   #10 (permalink)
tommyturboinmd
Registered User
 
tommyturboinmd's Avatar
 
Join Date: Feb 2003
Location: Mount Airy, Md USA
Posts: 18
I know its been awhile but wondering if the chrome turbo shield is still available? tks
__________________
1986 GN
TA-49, 009's, RA 93 street chip, adj fuel reg, 9" K&N, XP Plus fp, 23 row stock loc inter, ATR hoses, 3" THDP w/dump, CNC bell mouth throttle body, Vince Janis built trans, with orange stripe conv, 3.42 posi, airbags, fan/tcc lockup switch in console, vdo guages, fuel pressure on hood, SMII, Prostars, Nitto 275-60s; best ET so far 12.48 @ 111 with a 2.0 60' (ouch)
tommyturboinmd is offline   Reply With Quote
Old 08-07-2005, 09:13 AM   #11 (permalink)
MSA231V6
Registered User
 
Join Date: Jul 2005
Location: Okemos, MI
Posts: 89
Quote:
Originally Posted by tommyturboinmd
I know its been awhile but wondering if the chrome turbo shield is still available? tks
No, this part has sold.
MSA231V6 is offline   Reply With Quote
Old 12-03-2005, 12:21 AM   #12 (permalink)
Evans Ward
Registered User
 
Evans Ward's Avatar
 
Join Date: May 2001
Location: Macon, GA
Posts: 615
checking on a part and availability??

Still have this part?

(1) Facyory Transmission Dipstick with tube (Stock)
Price: $20

Please let me know if you do? Will send you a PM as well. Thanks!
__________________
Evans Ward
Macon, GA

87 Turbo Regal, LC2/ Y56 Regal, TA49, Turbo Saver filtration kit, RJC AD PP, Blue's, Turbo Tweak Alky chip, SMC alky (Razor kit to be installed soon), Walbro 340, MPE 3" DP, Dutt neck stock IC, Eaton posi, 2 3/4 " cat back duals, air bags, cold air kit w/K+N, all braces, white w/factory heavy padded dark blue landau vinyl top, T-Top, cornering lights, chrome package, polished T wheels, Scanmaster 2.1

06 Chevrolet TrailBlazer SS, stock, Summit White with leather, every option ecept navi.

Bikes: 04 Kawasaki silver ZRX 1200R , 72 Kawasaki blue H2 Mach IV 750 Triple (piped and jetted!), 84 Yamaha RZ350 yellow/ black Kenny Roberts Replica.
Evans Ward is offline   Reply With Quote
Old 12-03-2005, 12:55 PM   #13 (permalink)
WINDMILL
Registered User
 
WINDMILL's Avatar
 
Join Date: Sep 2000
Location: FORT PAYNE,AL
Posts: 173
engine bracket

Could you send me some pic of the main accessory bracket, please send to
turbomonk@hotmail.com thanks
__________________
1987 Grand National
Precision 68-h turbo, 72#inj, 204-214 cam, Champion iron heads & intake, RJC power plate & boost controller, Precision hat, 70mm t/b, ATR front mount, 350 trans with art car converter, 3-1/2" THDP, ATR straight shot, Metco upper's & lowers, ATR sway bar, 9" Moser-33 spline, Aluminum center housing, 3.50 gear

http://s124.photobucket.com/albums/p...t=100_0826.flv
60Ft= 1.45
1/8= 6.79
MPH= 101.
at 21#
WINDMILL is offline   Reply With Quote
Old 12-03-2005, 02:47 PM   #14 (permalink)
87GNXCLONE
Registered User
 
Join Date: Nov 2005
Location: Midland, TX
Posts: 23
Hello. I am interested in the 3in. Stainless Exhaust system. I would like to know what the price is with the Test Pipe. Also, the stock turbo cover that is modified for a 3in. pipe. Please let me know if that is still available as well.

You can e-mail me at: RCollier001@msn.com

Thanks.







87GNXCLONE is offline   Reply With Quote
Old 12-03-2005, 03:22 PM   #15 (permalink)
87GNXCLONE
Registered User
 
Join Date: Nov 2005
Location: Midland, TX
Posts: 23
Sent you a pm.
87GNXCLONE is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 04:14 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0