Wanted to buy Buick Turbo "6" aluminum valve covers!

Spoolin Around · 01-18-2002, 08:06 PM

These are the covers with Buick and the turbo 6 emblem cast in aluminum, taller than stock I believe. Will pay good $$ for a nice set. Please e-mail direct if possible. Thanks.

------------------
Brad Thompson,1987 GN T-top, GNX takeoff turbo from ASC, CASV4, 65mm AccuFab plenum, 65mm PTE TB, Jay Carter Alky Kit with Plennum Stealth Injection Plate, Walboro 340, 42.5# Lucas 009's, Jay Carter Street chip, Red Armstrong 93 and Race chip, Metco Billet rear lower control arms, ATR 8.5mm race wires, braided fuel and turbo oil feed lines, ATR cold air kit, 14" K&N filter, Kenne-Bell ram air spoiler, Fully Kirban Braced, ATR 3" downpipe with 3" high flow cat and crossover, Ported turbo exhust housing with Jett-Hot coating. Hooker supercomp 2.5 dual exhaust, rear exit, Jett-Hot coated ATR header, Aluminum underdrive pully, Custom Mallory Billet alternator pulley, fully gauged, Caspers knock gauge, 16" GNX wheels, BF Goodrich Comp TA ZR's, shaft loop, pinion snubber, 4-core rad with high volume pump, manual fan controller, GNX O2 sensor, Art Carr shift kit with deep aluminum finned pan, B&M transcooler, Kenne-Bell hood mounted fuel pressure gauge, ATR intercooler air deflector, Viper keyless entry and security. Boost set at a confident 22# (with Alcohol) on 94 Octane Sunoco mailto:Bradandtammy@sympatico.caBradandtammy@sympatico.ca</A>

turbovsix · 01-19-2002, 10:11 PM

They got them here Jay's GN's http://www.jaysgn.com/dress.html#vc

------------------
Got Boost???

Spoolin Around · 01-20-2002, 09:15 PM

Thanks Turbovsix, that is what I am looking for. Much appreciated.
Brad

01-18-2002, 08:06 PM	#1 (permalink)
Spoolin Around Registered User Join Date: May 2001 Location: Elizabethtown, Ontario, Canada, K6T-1A4 Posts: 812	Wanted to buy Buick Turbo "6" aluminum valve covers! These are the covers with Buick and the turbo 6 emblem cast in aluminum, taller than stock I believe. Will pay good $$ for a nice set. Please e-mail direct if possible. Thanks. ------------------ *Brad Thompson*,1987 GN T-top, GNX takeoff turbo from ASC, CASV4, 65mm AccuFab plenum, 65mm PTE TB, Jay Carter Alky Kit with Plennum Stealth Injection Plate, Walboro 340, 42.5# Lucas 009's, Jay Carter Street chip, Red Armstrong 93 and Race chip, Metco Billet rear lower control arms, ATR 8.5mm race wires, braided fuel and turbo oil feed lines, ATR cold air kit, 14" K&N filter, Kenne-Bell ram air spoiler, Fully Kirban Braced, ATR 3" downpipe with 3" high flow cat and crossover, Ported turbo exhust housing with Jett-Hot coating. Hooker supercomp 2.5 dual exhaust, rear exit, Jett-Hot coated ATR header, Aluminum underdrive pully, Custom Mallory Billet alternator pulley, fully gauged, Caspers knock gauge, 16" GNX wheels, BF Goodrich Comp TA ZR's, shaft loop, pinion snubber, 4-core rad with high volume pump, manual fan controller, GNX O2 sensor, Art Carr shift kit with deep aluminum finned pan, B&M transcooler, Kenne-Bell hood mounted fuel pressure gauge, ATR intercooler air deflector, Viper keyless entry and security. Boost set at a confident 22# (with Alcohol) on 94 Octane Sunoco mailto:Bradandtammy@sympatico.caBradandtammy@sympatico.ca</A> __________________ 86 GN Hardtop. "SOLD........"

01-19-2002, 10:11 PM	#2 (permalink)
turbovsix Lurker Join Date: Oct 2000 Location: Kaneohe , Hawaii Posts: 35	They got them here Jay's GN's http://www.jaysgn.com/dress.html#vc ------------------ Got Boost??? __________________ Got Boost??? 87 Turbo Buick

01-20-2002, 09:15 PM	#3 (permalink)
Spoolin Around Registered User Join Date: May 2001 Location: Elizabethtown, Ontario, Canada, K6T-1A4 Posts: 812	Thanks Turbovsix, that is what I am looking for. Much appreciated. Brad __________________ 86 GN Hardtop. "SOLD........"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode