sheet happens :)

pacecarta · 10-30-2009, 03:33 PM

mjdwyer23 · 10-30-2009, 03:35 PM

Nice, yours?

GrndNatnl · 10-30-2009, 03:37 PM

Woah.. what happened there Paul?

pacecarta · 10-30-2009, 03:39 PM

the little stock piston finally gave up

no signs of anything else

btw heres the slip

1.480
4.284
6.672@102.42
8.761
10.566 @123.75

it had just gone 103.5 and 128 (10.53).. 60 ft wasnt great

GrndNatnl · 10-30-2009, 03:43 PM

Ouch, thats a nasty crack. Looks like daylight through there. Hopefully everything else is alright.

pacecarta · 10-30-2009, 03:45 PM

everything else looks good , bearings needed a refreshening anyway . ive got a box of stock pistons just undecided yet if i should bother slapping another in there or go another route

Black-TTA · 10-30-2009, 04:07 PM

Meh, a little JB Weld will fix her right up....

What did the head gasket look like Paul, was it salvageable lol?

pacecarta · 10-30-2009, 04:27 PM

the cometic 060 gaskets didnt leak . they are good for another goround .. the oil was mostly on passenger side but the piston that failed was #3 driverside

i could slap a piston in and she'd be good to go but then i have the 87 with 030 forged pistons and steel maincaps so i might yank that motor transfer heads cam from 86 to it and reassemble this block with another stock piston and drop it in the firebird , id put the almost stock motor i just built and dropped into the 86 into the 87

gbsean · 10-30-2009, 09:45 PM

ouch...just proves there is a limit to everything...what caused it...age

pacecarta · 10-30-2009, 10:52 PM

600hp and lot of runs would be my guess

ttypewe4jim · 10-30-2009, 11:38 PM

Quote:

Originally Posted by pacecarta

600hp and lot of runs would be my guess

meh I think its the tuner! he doesnt know how to tune a fast box very well

Pauly throw a set of real pistons in it and put on a girdle and give that car hell!

stickybones · 10-30-2009, 11:38 PM

Quote:

Originally Posted by pacecarta

the cometic 060 gaskets didnt leak . they are good for another goround .

Paul

Just out of curiosity, will you do any prep work on the cometics before you reuse them?

Mike

pacecarta · 10-30-2009, 11:44 PM

wash em off in tray of lacquer thinner ,dry and coat with copper spray

ttypewe4jim · 10-30-2009, 11:48 PM

Quote:

Originally Posted by pacecarta

wash em off in tray of lacquer thinner ,dry and coat with copper spray

and you talked me into cometics

hopefully i dont crack a piston soon

stickybones · 10-30-2009, 11:56 PM

Quote:

Originally Posted by pacecarta

wash em off in tray of lacquer thinner ,dry and coat with copper spray

Hmmmm. Lacquer thinner will remove that viton coating or any supplemental sealant treatment (copper spray, hylomar, etc.) applied????

10-30-2009, 03:33 PM	#1 (permalink)
pacecarta MAGNABUICK.com .. NJ rep Join Date: Oct 2004 Posts: 3,198	sheet happens :) __________________ paul ....central NJ... only 5 weeks to go ...gettr' done!! the 86gn stock shortblock 71Q and some other boltons 1.46 10.41 129.85-etown in recovery , temp bone stock engine and turbo 12.50 107 @ 18psi -atco the 87gn te44 pac duttneck 11.31 120.9 @22psi 12.14 109.19 stock turbo at 22psi chips by turbotweak.com the 86 and some other Magna GNs having some fun at Atco Raceway http://videos.streetfire.net/video/e...8c013e4547.htm 2010BPG member... #2045 Last edited by pacecarta; 02-02-2010 at 04:31 PM.

10-30-2009, 03:35 PM	#2 (permalink)
mjdwyer23 Money Pit Join Date: Aug 2006 Location: Wilmington, DE Posts: 2,175	Nice, yours? __________________ Matt Dwyer SOLD -- 1987 WE4, PT52, PTE front mount, 50 Lbs., 70mm TB/Hemco upper, Razor's Alky, THDP, RJC EVERYTHING! ATR stainless 3" exhaust, Test pipe with electric cutout, GN spoiler, Turbo Tweak chip, Scanmaster, 11.58@120 1.8 60' SOLD -- 70 Chevelle -- 427, solid roller, forged.

10-30-2009, 03:37 PM	#3 (permalink)
GrndNatnl Risky Business Join Date: Jan 2001 Location: DeLand, FL Posts: 6,436	Woah.. what happened there Paul? __________________ Matt Alexander 1987 Grand National 11.35 @ 118.4 mph -- 1.50 60' Central Florida Grand National & T-Type Club Mid-Atlantic Grand National Association (MAGNA) Club Founder

10-30-2009, 03:39 PM	#4 (permalink)
pacecarta MAGNABUICK.com .. NJ rep Join Date: Oct 2004 Posts: 3,198	the little stock piston finally gave up no signs of anything else btw heres the slip 1.480 4.284 6.672@102.42 8.761 10.566 @123.75 it had just gone 103.5 and 128 (10.53).. 60 ft wasnt great __________________ paul ....central NJ... only 5 weeks to go ...gettr' done!! the 86gn stock shortblock 71Q and some other boltons 1.46 10.41 129.85-etown in recovery , temp bone stock engine and turbo 12.50 107 @ 18psi -atco the 87gn te44 pac duttneck 11.31 120.9 @22psi 12.14 109.19 stock turbo at 22psi chips by turbotweak.com the 86 and some other Magna GNs having some fun at Atco Raceway http://videos.streetfire.net/video/e...8c013e4547.htm 2010BPG member... #2045

10-30-2009, 03:43 PM	#5 (permalink)
GrndNatnl Risky Business Join Date: Jan 2001 Location: DeLand, FL Posts: 6,436	Ouch, thats a nasty crack. Looks like daylight through there. Hopefully everything else is alright. __________________ Matt Alexander 1987 Grand National 11.35 @ 118.4 mph -- 1.50 60' Central Florida Grand National & T-Type Club Mid-Atlantic Grand National Association (MAGNA) Club Founder

10-30-2009, 03:45 PM	#6 (permalink)
pacecarta MAGNABUICK.com .. NJ rep Join Date: Oct 2004 Posts: 3,198	everything else looks good , bearings needed a refreshening anyway . ive got a box of stock pistons just undecided yet if i should bother slapping another in there or go another route __________________ paul ....central NJ... only 5 weeks to go ...gettr' done!! the 86gn stock shortblock 71Q and some other boltons 1.46 10.41 129.85-etown in recovery , temp bone stock engine and turbo 12.50 107 @ 18psi -atco the 87gn te44 pac duttneck 11.31 120.9 @22psi 12.14 109.19 stock turbo at 22psi chips by turbotweak.com the 86 and some other Magna GNs having some fun at Atco Raceway http://videos.streetfire.net/video/e...8c013e4547.htm 2010BPG member... #2045

10-30-2009, 04:07 PM	#7 (permalink)
Black-TTA Registered User Join Date: Sep 2009 Posts: 73	Meh, a little JB Weld will fix her right up.... What did the head gasket look like Paul, was it salvageable lol?

10-30-2009, 04:27 PM	#8 (permalink)
pacecarta MAGNABUICK.com .. NJ rep Join Date: Oct 2004 Posts: 3,198	the cometic 060 gaskets didnt leak . they are good for another goround .. the oil was mostly on passenger side but the piston that failed was #3 driverside i could slap a piston in and she'd be good to go but then i have the 87 with 030 forged pistons and steel maincaps so i might yank that motor transfer heads cam from 86 to it and reassemble this block with another stock piston and drop it in the firebird , id put the almost stock motor i just built and dropped into the 86 into the 87 __________________ paul ....central NJ... only 5 weeks to go ...gettr' done!! the 86gn stock shortblock 71Q and some other boltons 1.46 10.41 129.85-etown in recovery , temp bone stock engine and turbo 12.50 107 @ 18psi -atco the 87gn te44 pac duttneck 11.31 120.9 @22psi 12.14 109.19 stock turbo at 22psi chips by turbotweak.com the 86 and some other Magna GNs having some fun at Atco Raceway http://videos.streetfire.net/video/e...8c013e4547.htm 2010BPG member... #2045 Last edited by pacecarta; 10-30-2009 at 04:33 PM.

10-30-2009, 09:45 PM	#9 (permalink)
gbsean do not set chip to Valet Join Date: Jul 2005 Location: Flanders, N.J. Posts: 14,199	ouch...just proves there is a limit to everything...what caused it...age __________________ UPCOMING BPG EVENTS 2010 Stage 1 CONVENTION July 30,31 Aug 1 2010 2011 TTA T-Type T-PARTY July 29,30,31 2011 11.599 @ 119.91 with issues Sean Ryder Buick Performance Group Chairman www.buickperformancegroup.com http://www.magnabuick.com/ see thread for Engine Specs http://www.turbobuicks.com/forums/wa...tml#post680751 happy now Rich

10-30-2009, 10:52 PM	#10 (permalink)
pacecarta MAGNABUICK.com .. NJ rep Join Date: Oct 2004 Posts: 3,198	600hp and lot of runs would be my guess __________________ paul ....central NJ... only 5 weeks to go ...gettr' done!! the 86gn stock shortblock 71Q and some other boltons 1.46 10.41 129.85-etown in recovery , temp bone stock engine and turbo 12.50 107 @ 18psi -atco the 87gn te44 pac duttneck 11.31 120.9 @22psi 12.14 109.19 stock turbo at 22psi chips by turbotweak.com the 86 and some other Magna GNs having some fun at Atco Raceway http://videos.streetfire.net/video/e...8c013e4547.htm 2010BPG member... #2045

10-30-2009, 11:44 PM	#13 (permalink)
pacecarta MAGNABUICK.com .. NJ rep Join Date: Oct 2004 Posts: 3,198	wash em off in tray of lacquer thinner ,dry and coat with copper spray __________________ paul ....central NJ... only 5 weeks to go ...gettr' done!! the 86gn stock shortblock 71Q and some other boltons 1.46 10.41 129.85-etown in recovery , temp bone stock engine and turbo 12.50 107 @ 18psi -atco the 87gn te44 pac duttneck 11.31 120.9 @22psi 12.14 109.19 stock turbo at 22psi chips by turbotweak.com the 86 and some other Magna GNs having some fun at Atco Raceway http://videos.streetfire.net/video/e...8c013e4547.htm 2010BPG member... #2045

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T-TOP sheet metal repair?	Nasty	Buick V6 Turbo Tech	1	07-07-2009 08:33 PM
Sheet metal hole saw?	Just a Six??	Buick V6 Turbo Tech	11	11-02-2008 09:40 AM
Where To Find Build Sheet	GNBYGM	The Waiting Room	9	04-21-2008 10:48 PM
Is this the build sheet?	robk46	Buick V6 Turbo Tech	9	01-16-2007 06:20 PM
Need a piece of sheet metal...	J Banning	Mid Atlantic Grand National Association (MAGNA)	17	07-13-2006 04:36 PM