fender roller anyone?

ajt86 · 04-08-2007, 09:12 PM

anyone interested in buying a fender roller?

its 250$, but you only really need the tool once. ive seen alot of clubs and group of guys chip in and buy one. i was thinkin if we could get some intrest we could get a buncha guys to chip in, banning or hooper could stash it away and we could just keep passing it around

a guy on the other board bought it himself and rents it out, but this way if we get like 10 guys its only 25$ a shot? or if we get more the price goes down

it was just an idea, if not ill buy one and ill rent it out for profit

and for those of you who dont know what it is, it rolls the lip of the rear quarter pannel for tire clearance. and if your not comfterble using it id do it for ya too- what a nice guy i am

http://www.eastwoodco.com/jump.jsp?i...rID=140&KICKER

Sleeper-6 · 04-09-2007, 05:40 PM

If you can get the cost near $25.00 I would be interested. If not, I'll have to rent it from you.

J Banning · 04-09-2007, 09:11 PM

Count me in if it is $25 or under.

-Banning.

ajt86 · 04-09-2007, 09:15 PM

ok so thats 3 of us- 7 more to go- well 8 for tax and shipping lol

cmon guys- everyones always talking about how this tool is so great but its hard to spend 250$ for somthing youll use once and let it sit untill the next project rolls around

and i know hoopers got like 30 cars he could use this on

jhuber · 04-09-2007, 09:28 PM

hehehe
My dad says rolling the lips makes the value of my GN go down the toilet...not good when Barrett Jackson comes to town and buys all the GN's he can find!!!

ajt86 · 04-09-2007, 09:54 PM

1.Me
2.sleeper-6
3.banning
4.hooper

getting there......

ajt86 · 04-09-2007, 10:11 PM

well hoopers out cuz mr. c bitched him out complaining that it kills the resale of his car blah blah blah blah blah blah

jhuber · 04-09-2007, 10:17 PM

...no my Dad said that about the resale value...Mr C said stuff you dont want me to repeat!!!

GrndNatnl · 04-09-2007, 10:18 PM

I'm no expert, but I doubt it would affect the value on a driven car that much.

Chances are, whoever buys it is going to stuff a set of fat meats out back and go racing eventually anyway. Now if this was an all original numbers car, that would be a different story.

Andy's GN · 04-09-2007, 10:22 PM

count me in Andrew.

ajt86 · 04-12-2007, 06:16 PM

we got 5 now- 5 more to go

gbsean · 04-12-2007, 06:22 PM

you can count me in...although I have done it the old fashioned way with a hammer and dolly....what brand are you getting...eastwood has some nice ones

ajt86 · 04-12-2007, 06:26 PM

the eastwood one in the link

4 more

gbsean · 04-12-2007, 06:31 PM

Quote:

Originally Posted by ajt86

the eastwood one in the link

4 more

duh did not even see that

84BuickGNYorkPA · 04-13-2007, 10:44 PM

Put me in, if it's safe.... I just installed new springs, shocks, H/R bar, Nitto's and no rub rub

But I suspect that like everything else that get's old, it will sag

and then I will need a lip roll .....

Chuck

04-08-2007, 09:12 PM	#1 (permalink)
ajt86 Registered User Join Date: Mar 2005 Location: Sicklerville, NJ Posts: 2,334	fender roller anyone? anyone interested in buying a fender roller? its 250$, but you only really need the tool once. ive seen alot of clubs and group of guys chip in and buy one. i was thinkin if we could get some intrest we could get a buncha guys to chip in, banning or hooper could stash it away and we could just keep passing it around a guy on the other board bought it himself and rents it out, but this way if we get like 10 guys its only 25$ a shot? or if we get more the price goes down it was just an idea, if not ill buy one and ill rent it out for profit and for those of you who dont know what it is, it rolls the lip of the rear quarter pannel for tire clearance. and if your not comfterble using it id do it for ya too- what a nice guy i am http://www.eastwoodco.com/jump.jsp?i...rID=140&KICKER __________________ Traenkner Performance Tunes Tuning most 98-present GM PCMs, including solstice/sky turbo, d-max, LS1, LS2, 3800 platform, S-T truck, CK truck, ford mustang 05-07 plus ford F-150 04-07 and more.... 2005 Cadillac CTS-V 5.7L LS6, 6 speed, bone stock Last edited by ajt86; 04-08-2007 at 09:15 PM.

04-09-2007, 05:40 PM	#2 (permalink)
Sleeper-6 Registered User Join Date: Aug 2004 Location: Stirling NJ Posts: 387	If you can get the cost near $25.00 I would be interested. If not, I'll have to rent it from you. __________________ Big Dreams, No Cash, but a whole lot of Creativity mixed with a little bit of Stupidity! 87 GN - TE-61, Big Mouth Cold Air, LS-1 MAF, RJC Power Plate, 72lb Inj,Ported Irons by Jack Merkel, Comp 212 Roller, ATR Double Pumper, Big neck IC, Razor's Progressive Alky, Mease 3" Downpipe, Test pipe w/dump, ATR 3" Crossflow exhaust, Trans+ and Extender Extreme, Trans by Me!, Pro-torque 3200 converter. Nitto DRs. So far she's gone 12.56 at 110.3 mph @17psi , 2.04 60 Ft. On the Injured list...........109 Stroker coming.........Someday??? 06 TrailBlazer SS - Superior Blue, Stock.......................for now.

04-09-2007, 09:11 PM	#3 (permalink)
J Banning www.magnabuick.com Join Date: Sep 2001 Location: Wilmington, DE Posts: 6,545	Count me in if it is $25 or under. -Banning. __________________ Banning Cohen 1986 T-Type WH1 10.62@125.45 (1.43 best 60') Mid-Atlantic Grand National Association (MAGNA) Club Director & Delaware State Rep. Sign up for the 2010 MAGNA Points Series Someday this all might come together: Girdled 109 stroker, 76GTQ 4-bolt turbo, Bronsonian Stage IV heads, 83's and Razor's dual nozzle, Turbotweak Speed Density w/WBo2 control, Powerstroke IC, Michael's TH400 w/transbrake, 33 spline Mosers & full spool, 325/50/15 drag radials.

04-09-2007, 09:15 PM	#4 (permalink)
ajt86 Registered User Join Date: Mar 2005 Location: Sicklerville, NJ Posts: 2,334	ok so thats 3 of us- 7 more to go- well 8 for tax and shipping lol cmon guys- everyones always talking about how this tool is so great but its hard to spend 250$ for somthing youll use once and let it sit untill the next project rolls around and i know hoopers got like 30 cars he could use this on __________________ Traenkner Performance Tunes Tuning most 98-present GM PCMs, including solstice/sky turbo, d-max, LS1, LS2, 3800 platform, S-T truck, CK truck, ford mustang 05-07 plus ford F-150 04-07 and more.... 2005 Cadillac CTS-V 5.7L LS6, 6 speed, bone stock

04-09-2007, 09:28 PM	#5 (permalink)
jhuber In WayToo Deep Join Date: Aug 2004 Location: Blackwood, NJ Posts: 5,824	hehehe My dad says rolling the lips makes the value of my GN go down the toilet...not good when Barrett Jackson comes to town and buys all the GN's he can find!!! __________________ Sign up for the 2010 MAGNA Points Series John Huber Mid-Atlantic Grand National Association (MAGNA) Assistant Club Director & New Jersey State Rep. Buick Performance Group BPG Member #2033 #2 rocks to the tune of 12.25@107mph, Stock turbo #2 rocks to the tune of 10.98@121mph, TA49 turbo Huber at Cecil 2008 Huber at Atco 2008 Huber 10.98 at 121 7.97 at 175 GN 7.97 at 175 GN ...all this and a WH-1 too!!! Last edited by jhuber; 04-09-2007 at 10:06 PM.

04-09-2007, 09:54 PM	#6 (permalink)
ajt86 Registered User Join Date: Mar 2005 Location: Sicklerville, NJ Posts: 2,334	1.Me 2.sleeper-6 3.banning 4.hooper getting there...... __________________ Traenkner Performance Tunes Tuning most 98-present GM PCMs, including solstice/sky turbo, d-max, LS1, LS2, 3800 platform, S-T truck, CK truck, ford mustang 05-07 plus ford F-150 04-07 and more.... 2005 Cadillac CTS-V 5.7L LS6, 6 speed, bone stock

04-09-2007, 10:11 PM	#7 (permalink)
ajt86 Registered User Join Date: Mar 2005 Location: Sicklerville, NJ Posts: 2,334	well hoopers out cuz mr. c bitched him out complaining that it kills the resale of his car blah blah blah blah blah blah __________________ Traenkner Performance Tunes Tuning most 98-present GM PCMs, including solstice/sky turbo, d-max, LS1, LS2, 3800 platform, S-T truck, CK truck, ford mustang 05-07 plus ford F-150 04-07 and more.... 2005 Cadillac CTS-V 5.7L LS6, 6 speed, bone stock

04-09-2007, 10:17 PM	#8 (permalink)
jhuber In WayToo Deep Join Date: Aug 2004 Location: Blackwood, NJ Posts: 5,824	...no my Dad said that about the resale value...Mr C said stuff you dont want me to repeat!!! __________________ Sign up for the 2010 MAGNA Points Series John Huber Mid-Atlantic Grand National Association (MAGNA) Assistant Club Director & New Jersey State Rep. Buick Performance Group BPG Member #2033 #2 rocks to the tune of 12.25@107mph, Stock turbo #2 rocks to the tune of 10.98@121mph, TA49 turbo Huber at Cecil 2008 Huber at Atco 2008 Huber 10.98 at 121 7.97 at 175 GN 7.97 at 175 GN ...all this and a WH-1 too!!!

04-09-2007, 10:18 PM	#9 (permalink)
GrndNatnl Risky Business Join Date: Jan 2001 Location: DeLand, FL Posts: 6,436	I'm no expert, but I doubt it would affect the value on a driven car that much. Chances are, whoever buys it is going to stuff a set of fat meats out back and go racing eventually anyway. Now if this was an all original numbers car, that would be a different story. __________________ Matt Alexander 1987 Grand National 11.35 @ 118.4 mph -- 1.50 60' Central Florida Grand National & T-Type Club Mid-Atlantic Grand National Association (MAGNA) Club Founder

04-09-2007, 10:22 PM	#10 (permalink)
Andy's GN Registered User Join Date: Dec 2006 Location: Sicklerville,NJ Posts: 192	count me in Andrew.

04-12-2007, 06:16 PM	#11 (permalink)
ajt86 Registered User Join Date: Mar 2005 Location: Sicklerville, NJ Posts: 2,334	we got 5 now- 5 more to go __________________ Traenkner Performance Tunes Tuning most 98-present GM PCMs, including solstice/sky turbo, d-max, LS1, LS2, 3800 platform, S-T truck, CK truck, ford mustang 05-07 plus ford F-150 04-07 and more.... 2005 Cadillac CTS-V 5.7L LS6, 6 speed, bone stock

04-12-2007, 06:22 PM	#12 (permalink)
gbsean Not a Democrat any more.. Join Date: Jul 2005 Location: Flanders, N.J. Posts: 14,338	you can count me in...although I have done it the old fashioned way with a hammer and dolly....what brand are you getting...eastwood has some nice ones __________________ UPCOMING BPG EVENTS 2010 Stage 1 CONVENTION July 30,31 Aug 1 2010 2011 TTA T-Type T-PARTY July 29,30,31 2011 11.599 @ 119.91 with issues Sean Ryder Buick Performance Group Chairman www.buickperformancegroup.com http://www.magnabuick.com/ see thread for Engine Specs http://www.turbobuicks.com/forums/wa...tml#post680751 happy now Rich

04-12-2007, 06:26 PM	#13 (permalink)
ajt86 Registered User Join Date: Mar 2005 Location: Sicklerville, NJ Posts: 2,334	the eastwood one in the link 4 more __________________ Traenkner Performance Tunes Tuning most 98-present GM PCMs, including solstice/sky turbo, d-max, LS1, LS2, 3800 platform, S-T truck, CK truck, ford mustang 05-07 plus ford F-150 04-07 and more.... 2005 Cadillac CTS-V 5.7L LS6, 6 speed, bone stock

04-13-2007, 10:44 PM	#15 (permalink)
84BuickGNYorkPA PA Cert. Machinist Join Date: Jun 2005 Location: York PA Posts: 2,489	Put me in, if it's safe.... I just installed new springs, shocks, H/R bar, Nitto's and no rub rub But I suspect that like everything else that get's old, it will sag and then I will need a lip roll ..... Chuck __________________ RJC Girdle, King Bearings, .04 Diamond slugs, 210/215 roller, 1:65 roller rockers 11.21 @ 122.78 conv unlocked, still tuning.... MAGNA BPG #2015 Cotton's, Gbody Parts, Alky Control, Casper's, Full Throttle Speed, Turbo Tweak, Michael's Transmissions

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eastwood Fender Roller for rent	87LtdT	Parts For Sale	43	01-17-2010 07:25 AM
Bad Ass fender roller tool	PaCemkr86	Buick V6 Turbo Tech	5	08-04-2006 07:53 AM
Roller Cams, worth it or not?	Orlando_87GN	Buick V6 Turbo Tech	15	08-15-2003 06:26 AM
Double Roller Timing Chains	RX-6	Buick V6 Turbo Tech	15	10-25-2001 12:50 PM
Billet Roller DIY kit problem?	Mac in SD	Buick V6 Turbo Tech	13	08-02-2001 12:48 AM