MASSIVE parts sale...

[J Banning]

We're cleaning out our shop of a ton of spare parts that we had sitting around. Stay tuned for the MASSIVE list of parts new & used in the next day or two. I should be able to bing most (if not all) to Fox Run this weekend.

Again, I'll post the full list in a day or two when it is complete.

**EDITED 7/15/05 - Here's the list**

This has only been posted for the MAGNA guys. It's all stuff 2-3 of us had laying around in the garage. We'd prefer to sell this locally. It would be easier for both parties. We don't have the time to run back & forth to UPS, and you (the buyer) can save on shipping and delivery time... not to mention you'd be able to check out the stuff before paying for it.

Payment: Because the parts are from 2-3 people, we'd prefer cash or money order.

Because of the sheer volume of this stuff (didn't think we had this much!) we just threw some prices on the parts. All prices are negotiable. Please email or PM if you are serious.

Here goes...

---------------------------------------
WHEELS AND TIRES
---------------------------------------
(2) Centerline Convo Pro Wheels [Sales Pending]
15x10, 5” Backspacing, Drilled
Price: $340/pair

(2) Centerline Convo Pro Wheels
15x10, 5” Backspacing, Undrilled
Price: $350/pair

(2) Centerline Convo Pro Wheels
15x7, 3-3/8” Backspacing, Undrilled
Price: $250/pair

(2) American Racing Outlaw Wheels
15x8, 3-1/2” Backspacing, Drilled
Price: $100/pair

(2) American Racing Outlaw Wheels
15x8, 3-1/2” Backspacing, Undrilled
Price: $120/pair

(2) Firestone Drag Slicks
28.5x10.5x15, Used, but good tread
Price: $100/pair

(2) Moroso Drag Special Frontrunners
28x7 (approximate), Low use
Price: $170/pair

(2) BF Goodrich Euro T/A Radials
305/50/15, Less than 50 miles
Price: $175/pair

(2) BF Goodrich Comp T/A Radials
205/60/15, Less than 50 miles
Price: $120/pair

(3) Factory Spare Tires & Wheels
Price: $30/each

---------------------------------------
DRIVE TRAIN/SUSPENSION
---------------------------------------
(1) Drive Shaft – 3”, Aluminum [Sales Pending]
Never used
Price: $275

(1) Drive Shaft (Stock)
Price: $40

(1) Transmission, 200R4
Fresh DelTrans Race Rebuild, 0 miles
Price: $1050

(1) Rear End, 8.5” (Complete drum to drum)
28 Spline Moser C-Clip Eliminator Axles, S10 Brake Pistons
TA Performance Rear End Cover, Southside Lower Control Arms
Price: $1100

(1) Pro-traction Adjustable Upper Control Arms, Pair
Price: $175/pair

(1) Rear Coil Springs, with Air Bags, Pair
New replacement springs, limited use, air bags intact with feed line
Price: $80

(2) Front Sway Bars (Stock)
Price: $20/each

(1) Axles, Pair (Stock)
Price: $40/each or $75/pair

---------------------------------------
ENGINE/UNDER HOOD
---------------------------------------
(1) Billet Alum Valve Cover Breather, with K&N Filter
Price: $20

(1) 3” Polished Turbo Intake Housing
.60 A/R, Never used (fits 60 series turbo)
Price: $75

(1) Factory Passenger Side Fender-well Inner Liner
Excellent Condition. No cracks, scrapes, etc.
Price: $325

(3) Radiators (Stock)
Good for cores if sending somewhere like Holm's Radiator for recore.
Price: $30/each

(2) Factory Fuel Pressure Regulator 90-degree Hard Line
Price: $10/each

(1) Billet Bosch 233 Billet Top Fuel Pressure Regulator
Price: $50

(1) Stock-appearing (adjustable) Bosch 233 Fuel Pressure Regulator
Adjustable via set screw inside top vaccum port.
Price: $50

(1) GM A/C Delete Pulley/Bracket
Price: $30

(1) Precision .63 Turbo Exhaust Housing
Fits on P-trim Exhaust Wheel
Price: $75

(1) Aluminum Engine Accessory Bracket
Jet Hot Coated, holds on A/C and Power Steering
Price: $50

(1) Flow Kooler High Volume Water Pump
Clean, very low use
Price: $40

(2) Battery Cables (Stock)
Price: $10/pair

(1) A/C Condenser
Price: $20

(1) Harmonic Balancer (Stock)
Price: $30

(1) Flywheel (Stock)
Price: $30

(1) Wategate Actuator (Adjustable)
Price: $30

(1) Wategate Actuator (Non-adjustable)
Price: $15

(2) Crank Pulley, with Fan Adapter (Stock)
Price: $30/each

(1) Tensioner/Idler Pulley (Stock)
Price: $70

(1) Battery Hold-down, with Chrome Cover
Price: $15

(1) Turbo Shield [Sales Pending]
Chrome, unmodified
Price: $55

(1) Turbo Shield [Sales Pending]
Stock, unmodified
Price: $35

(1) Turbo Shield
Chrome, modified for 3" DP
Price: $25

(1) Turbo Shield
Stock, modified for 3" DP and exhaust housing mounted external gate
Price: $15

(1) Factory Intercooler Up-Pipe (Stock)
Price: $20

(1) Fuel Injector Harness (Stock)
Price: $40

(1) EGR Solenoid
Price: $10

(1) Master Cylinder Cover, Chrome
Price: $10

(2) Oil Filter Adapters, with Oil Cooler Lines
Price: $45/each

(1) Downpipe (Stock)
Price: $20

(1) Catalytic Converter (Stock)
Price: $20

(1) Heater Control Valve, with Full Manifold Piping
Price: $25

(1) S-Hose Kit
Dennis Kirban, new in bag
Price: $40

(1) Front Air Dam Set.
Passenger side stock dam, drivers side is fiberglass replica with cold air intake. Includes hose.
Price: Driver - $75, Passenger - $40 or $100/pair

(1) Washer Jug (Stock, very good condition)
Price: $10

(3) Turbo Bracket (holds turbo to engine)
2 Stock; 1 Jet Hot Coated
Price: $15/each Stock, $20 Jet Hot Coated [Sales Pending - Jet Hot]

(1) Factory Plastic EGR Cover
Price: $10

(1) Chrome EGR Cover Overlay
Price: $15

(1) Facyory Transmission Dipstick with tube (Stock)
Price: $20

---------------------------------------
ELECTRICAL/ACCESSORIES
---------------------------------------
(1) Extech Digital Handheld EGT Gauge, Model 421501. Single input w/backlight. [Sales Pending]
Price: $50

(1) Subwoofer Box
Dual Bandpass with two 10” Eclipse Subwoofers
Price: $80

(1) Subwoofer Box
Dual Bandpass with 10” MTX Blue Thunder Subwoofer
Custom-made, fits under rear shelf of turbo Buick
Price: $150

(1) Radio Head Unit (Stock)
Price: $40

(1) Radio Head Unit, Eclipse Model ECD415
Price: $125

(1) Eclipse 4x10 Speakers, Model 3403 – Pair
Price: $50/pair

(1) MTX Round Tweeters – Pair
Price: $30/pair

(1) Pioneer 6x9 Speakers – Pair
Price: $75

(1) Sony Amplifier, 45x2 Watt
Price: $50

(1) MTX Amplifier, 80x2 Watt
Price: $75

(1) Kenwood Amplifier, 55x2 Watt
Price: $60

---------------------------------------
MISCELLANEOUS
---------------------------------------
(1) 3” Single Shot Exhaust - Bobby Simms (Action Fabrication)
Custom-made, Full Stainless with ATR Pit Bull Muffler, Polished Tip
Excellent condition, very low use, bolts on to test pipe (not included); includes 3” band clamp
Price: $350

(1) Set of Factory Sunvisors (Gray) [Sales Pending]
Price: $20

(1) Factory 1986 T-Type Grille.
Price: $50

(1) Lower Quarter Sail Trim - Pair (Gray)
Good condition
Price: $40/each, $75/pair

(1) Rear Seat Lower Cushion (Gray)
Price: $50

(1) Rear Seat Back Cushion (Gray)
Price: $25

(1) Rear Aluminum Bumper Brackets (for fiberglass rear bumper)
Price: $60/pair

(1) Rear Bumper Shell, Chrome
Price: $75

(1) Rear Aluminum Bumper Support
Price: $75

(2) Factory Jack Kits (Stock)
Price: $30/each

(2) Suspension Bushings (New in bag)
Price: $10/pair

(2) Tie Rod Ends (New in bag)
Price: $10/pair

(1) 200R4 Transmission Cross-member Mount (Stock)
Price: $10

(1) High Volume Fuel Pump, Factory Sending Unit & Hanger
Fuel pump appears to be Red Armstrong pump.
Price: $75

(1) 340 Fuel Pump, Sending Unit & MODIFIED Fuel Pump Hanger
Hanger modified for a second feed line (for external pump)
Price: $75

(2) Fuel Pump Hard Lines
Connects sending unit to stock fuel lines
Price: $20/each

(2) Fuel Tanks (Stock) [Sales Pending]
Tanks only - no sending units
Price: $75/each

(1) McGuard Lug Nuts for aftermarket wheels, miscellaneous sizes
Price: $1/each (you pick – can match up with washers, etc…)

---------------------------------------
BRAKES
---------------------------------------
(1) Power Master Brake Unit (Complete)
Price: TBD or Make Offer

(1) Front Brake Line with Proportioning Valve
Includes jumper valve (one broken electric terminal)
Price: TBD or Make Offer

[Slow91z]

Size and price on the slicks??

Size and price on the Convo-Pro's??

What exhaust housings??

You still have those export bumper supports??

[Jake]

I want dibs on the single shot and a/c delete. Maybe the convo pros too. Let me know what size the wheels are and how much you want for them and the other stuff..

[JBenn911]

I could use a new stock tank for my car !

[jhuber]

B, you got PM!!

[1970gsx]

Originally Posted by jhuber

B, you got PM!!

Hey HOOBER, say hi to the guy down at the credit union for me..

[FLR]

Originally Posted by jhuber

B, you got PM!!

Huber, you dont need anymore parts.

[J Banning]

Guys, keep this on topic.

I'll answer all emails/PMs in the order they are recieved.

As I mentioned above, we're still putting together the list and prices. I should be able to bring most (if not all) to Fox Run this weekend.

-Banning.

[J Banning]

Other pieces I forgot to add...

- Fresh DelTrans built 200R4. Billet servo & some other parts. ZERO miles.
- Aluminum driveshaft. ZERO miles.
- Jet Hot coated factory accessory bracket (what holds on A/C, power steering, etc.). Excellent cond.
- Factory '86-87 head unit.
- Factory '86-87 balancer & flywheel.
- NEW GM starter.
- (2) set of factory '86-87 battery cables.
- A/C condensor (some bent fins - works fine).

(Damn... I didn't think we had this much stuff sitting around!)

Again, I hope to have specs and prices LATER tonight. I'll respond in order of which emails/PMs were received.

-Banning.

[6 beats 8]

Dibs on the driveshaft!

[ttypewe4jim]

mybe dibs on the trans need more info on the parts tough....

[fireberd350]

interested in trans and stereo, let me know when you get the prices worked out

[DR VOODOO AT WORK 2]

Originally Posted by 6 beats 8

Dibs on the driveshaft!

YOU DONT NEED THAT il take it though

[jdodman]

Banning
Left you a PM on the gas tank earlier in the week. I am still interested if it is in decent shape...

[J Banning]

Sorry for the delay guys. This week has been crazy with work and all. I just got back from the garage (11:50pm) and gotta get some sleep.

We have the list, and my buddy Mike is typing it up tonight (majority of parts are his). I'll post it in the morning (parts, prices, etc.).

I've kept all the PMs and emails. I'll answer all as soon as I get that list from Mike.

We'll be at Fox Run this Saturday, so if you are truely serious about some of this stuff we'll bring it with us. If you don't like what you see then, then you don't need to buy it. However, after putting it all together there is no way we're going to be able to bring it all (would take two pickup trucks probably ). If you can't make it to Fox Run, I'm sure we can work something out where we can meet at another location/time.

I'll post the complete details in the morning. See y'all on Saturday.