Your choice of 2 deals: 1)FREE COIL PACKS or 2)$39 coil packs LIMITED BONUS SPECIAL

nos4gn · 02-17-2007, 08:01 PM

WOW-Thanks to everyone for all your orders!

We still have PLENTY of COIL PACKS IN STOCK at nos4gn

Deal 1) FREE COIL PACKS come with the $168.95 Ignition Module. www.nos4gn.com
CAN'T BEAT THAT PRICE!!

OR
Deal 2) NOW, for a limited time, take advantage of our LIMITED BONUS SPECIAL

if you purchase a $39.00 coil pack from our website at nos4gn.com, you will receive:

A FREE GASKET
PLUS 6 FREE STAINLESS STEEL MOUNTING SCREWS,
PLUS A FREE GENUINE ACDelco VIN 7 PCV VALVE

Here is the link: http://www.nos4gn.com/servlet/the-1/...l-Grand/Detail

Thanks again for all your business,
nos4gn

turbo nasty · 02-21-2007, 07:20 PM

Just got my Ign module deal in today... with free coil pack, gaskets and screws.
The packaging was superb came FED EX and low and behold they threw in a free dash duster with the shipment.

nos4gn · 02-23-2007, 05:22 PM

" NOS4GN" --- ACDelco IGNITION MODULES ARE BACK IN STOCK AS OF TODAY 2/23/07

For those who want to purchase the combo deal, please go to our website at: www.nos4gn.com

For those who had reserved one, we will notify you via a separate email.

Thanks for all your orders,
Glen @ nos4gn
www.nos4gn.com

nos4gn · 02-27-2007, 11:05 AM

Thanks to everyone that has purchased ACDelco ignition modules w/ FREE ignition coil packs.

Based on feedback we received from a very good customer, we would like to post the following;

FYI: Do not use the free stainless steel coil mounting appearance screws supplied to tap out the threads in the bosses of the new module.

When replacing the ignition module, it is necessary to tap coil mounting screw threads in the bosses of the new module. Although it is recommended to use the proper size/pitch thread tap to perform this task, it is also possible to use the original regular steel torx-head coil mounting screws to accomplish this. Although the stainless steel mounting screws are corrosion resistant and look great, they may not have the hardness necessary to tap out new threads in the new module without presenting difficulty.

After you finish tapping out the threads in the new module with the proper thread tap or the old regular steel torx-head coil mounting screws, you can then install the new stainless steel appearance screws without a problem.

Feel free to PM or call me at 847-612-6969 for any further information.

Best Regards: Glen@nos4gn

02-17-2007, 08:01 PM	#1 (permalink)
nos4gn Supporting Vendor Join Date: Jul 2006 Posts: 150	Your choice of 2 deals: 1)FREE COIL PACKS or 2)$39 coil packs LIMITED BONUS SPECIAL WOW-Thanks to everyone for all your orders! We still have PLENTY of COIL PACKS IN STOCK at nos4gn Deal 1) FREE COIL PACKS come with the $168.95 Ignition Module. www.nos4gn.com CAN'T BEAT THAT PRICE!! OR Deal 2) NOW, for a limited time, take advantage of our LIMITED BONUS SPECIAL if you purchase a $39.00 coil pack from our website at nos4gn.com, you will receive: A FREE GASKET PLUS 6 FREE STAINLESS STEEL MOUNTING SCREWS, PLUS A FREE GENUINE ACDelco VIN 7 PCV VALVE Here is the link: http://www.nos4gn.com/servlet/the-1/...l-Grand/Detail Thanks again for all your business, nos4gn

02-21-2007, 07:20 PM	#2 (permalink)
turbo nasty Boost Sux my Wallet Join Date: Aug 2003 Location: Mississippi Gulf Coast area Posts: 1,117	Just got my Ign module deal in today... with free coil pack, gaskets and screws. The packaging was superb came FED EX and low and behold they threw in a free dash duster with the shipment. __________________ 87 GN (3480lbs w/me & 1/2 tank) GT3255E, ESP FMIC, Razors Alky, Turbosaver, TA Headers, THDP w/test, ATR crossflow, TT, 38's, hopped up trans, Pats 10" 3k l/u, QA1r's, UMI Ups (adj) and lows, HR bar, MT DR's. 2003 G35 Coupe Blk on BLk, JDM Clears, 18's, Prem PKG, Lthr, Bose....wifes car 2005 Harleys : Wide Glide & Duece ...Mucho Bling

02-23-2007, 05:22 PM	#3 (permalink)
nos4gn Supporting Vendor Join Date: Jul 2006 Posts: 150	IGNITION MODULES W/FREE COIL PACK " NOS4GN" --- ACDelco IGNITION MODULES ARE BACK IN STOCK AS OF TODAY 2/23/07 For those who want to purchase the combo deal, please go to our website at: www.nos4gn.com For those who had reserved one, we will notify you via a separate email. Thanks for all your orders, Glen @ nos4gn www.nos4gn.com

02-27-2007, 11:05 AM	#4 (permalink)
nos4gn Supporting Vendor Join Date: Jul 2006 Posts: 150	RE: Stainless steel coil mounting screws Thanks to everyone that has purchased ACDelco ignition modules w/ FREE ignition coil packs. Based on feedback we received from a very good customer, we would like to post the following; FYI: Do not use the free stainless steel coil mounting appearance screws supplied to tap out the threads in the bosses of the new module. When replacing the ignition module, it is necessary to tap coil mounting screw threads in the bosses of the new module. Although it is recommended to use the proper size/pitch thread tap to perform this task, it is also possible to use the original regular steel torx-head coil mounting screws to accomplish this. Although the stainless steel mounting screws are corrosion resistant and look great, they may not have the hardness necessary to tap out new threads in the new module without presenting difficulty. After you finish tapping out the threads in the new module with the proper thread tap or the old regular steel torx-head coil mounting screws, you can then install the new stainless steel appearance screws without a problem. Feel free to PM or call me at 847-612-6969 for any further information. Best Regards: Glen@nos4gn

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode