billet WHAT? Stainless steel, Aluminum?

TURBO E38 · 08-13-2009, 08:01 PM

What is the compressor wheel on the new billet turbos made from, WHAT MATERIAL IS IT???

ANYONE KNOW?

Are the blades cut in place ? or are the shape bent after milling the stock?

REGARDS. TURBO E38

Nasty Wendy · 08-13-2009, 08:51 PM

aluminum

pacecarta · 08-13-2009, 10:38 PM

and no they aren't bent after machining ,

2QUICK2B6 · 08-14-2009, 12:28 AM

an they have ribs in the blades

TURBO E38 · 08-14-2009, 05:33 AM

WHO are the design engineers behind these and where are the Roots of first implementaion?

? DID GENERAL ELECTRIC or some TURBOPROP aircraft engine company do this twenty years ago?

Garrett, Federal mogal, IHI, KKK, R-jay, plus a lot of companies make turbochargers that I never heard of.

Is there a Industry wide trade journal on TURBOCHARGERS?

I guess a patent search on turbine compressor impellers may be a start to find the origin and timeline.

Thank you, Regards , TURBO E38

firebird_1252 · 08-14-2009, 08:33 AM

why DOES it MATTER? all that I KNOW is that it WORKS.

TG6 · 08-14-2009, 09:02 AM

Quote:

Originally Posted by TURBO E38

WHO are the design engineers behind these and where are the Roots of first implementaion?

? DID GENERAL ELECTRIC or some TURBOPROP aircraft engine company do this twenty years ago?

Garrett, Federal mogal, IHI, KKK, R-jay, plus a lot of companies make turbochargers that I never heard of.

Is there a Industry wide trade journal on TURBOCHARGERS?

I guess a patent search on turbine compressor impellers may be a start to find the origin and timeline.

Thank you, Regards , TURBO E38

Quote:

Originally Posted by firebird_1252

why DOES it MATTER? all that I KNOW is that it WORKS.

This person probably is writing a report for educational purposes.

I wish I knew more to help, but all I know is, they do what they're intended purposes are and end result is power.

TURBO E38 · 08-14-2009, 09:03 AM

I would like to know what I might be buying, Plus the more complex something is , the fun it is to talk about!

Even the most simple thing you can think could keep 10 Scholars busy for a lifetime and just scratch the surface,

Ofcousre , NOTHING ever done on this earth will matter given enough time, THE Human Race from this planet will cease to exist, and everything ever done here will not have mattered beacuse OUR SUN will ingulf the earth and melt everything down that ever existed, SO in the long RUN YOU ARE CORRECT, IT DOES NOT MATTER!

Slow91z · 08-14-2009, 12:15 PM

Wow.......You ARE a nut

firebird_1252 · 08-14-2009, 12:16 PM

Quote:

Originally Posted by Slow91z

Wow.......You ARE a nut

pacecarta · 08-14-2009, 01:36 PM

i should have known better than respond , hes not a scholar working on a paper...

heres some insight to the mind of turbo e38 ,formerly turbo ebody

NOT YELLOW but ORANGE for power 6 logo

gbsean · 08-14-2009, 03:00 PM

he is the only person on my ignore list....

firebird_1252 · 08-14-2009, 06:10 PM

wow that is one annoying person to be on seans iggy list oh wait

WOW that is ONE ANNOYING person to be ON seans IGGY LIST. ok thats better.

mjdwyer23 · 08-14-2009, 08:51 PM

Quote:

Originally Posted by gbsean

he is the only person on my ignore list....

he and dr. turbonicus...

motorhead · 08-15-2009, 10:45 AM

LMFAO! This guy doesn't have the capacity to process the information that he is asking for; just talking out of his ass.

08-13-2009, 08:01 PM	#1 (permalink)
TURBO E38 Certified buick NUT Join Date: Jun 2007 Location: Delaware Coast Posts: 135	billet WHAT? Stainless steel, Aluminum? What is the compressor wheel on the new billet turbos made from, WHAT MATERIAL IS IT??? ANYONE KNOW? Are the blades cut in place ? or are the shape bent after milling the stock? REGARDS. TURBO E38 __________________ 1987 Canadian GN, PTE SLIC,RJC PP,Cheetah BB Stage 3, ATR 3" DP with racegate, 255LPH +hotiwire, accufab ADJFPR,Test pipe, Hooker exhaust,Denso heated O2,Mototron 60lb injectors TTweak chip OR EXTENDER 512 chip, Pete Tomka 3.5" cold air kit. LS1 MAF/translator,AUTOLITE XP iridium plugs@.035", ACCEL coil Pak, B.F. Goodrich TA 255/60-15 rear Tires <>235/60-15 Front Tires, fully boxed control arms, full brace kit,COMP 980's, Hardened rocker shafts,$99 TurboBuicks lightweight starter 1985 TURBO RIVIERA CONVERTIBLE<>(RARE 1 of 47) 30lb inj, Champion irons, Harland sharp roller rockers,Denso INDEXED iridium plugs ,Accel coil pak,Holley 255lph fuel pump,adj FPR,TA33C turbo,87ecm,Denso heated O2, TURBOTWEAK closed loop idle chip,Black magic FAN, flowkooler waterpump,Kenney holms big tube GN radiator,FW4 3:36 axle, 188/188 REED cryo treated cam, rollmaster timing chain

08-13-2009, 08:51 PM	#2 (permalink)
Nasty Wendy Defender of the Universe Join Date: May 2001 Location: Waggaman, La. USA Posts: 10,454	aluminum __________________ The Turbobuicks.com FFL 2006 Champion DSR #3

08-13-2009, 10:38 PM	#3 (permalink)
pacecarta MAGNABUICK.com .. NJ rep Join Date: Oct 2004 Location: englishtown racewaypark Posts: 3,494	and no they aren't bent after machining , __________________ paul ....central NJ the 86 and some other Magna GNs having some fun at Atco Raceway http://videos.streetfire.net/video/e...8c013e4547.htm 2010BPG member... #2045

08-14-2009, 12:28 AM	#4 (permalink)
2QUICK2B6 Registered User Join Date: Sep 2004 Location: Flo town , South Kakalak Posts: 326	an they have ribs in the blades __________________ 89 TTA #299 STOCK 34,000 MILES * Vanna White * 89 TTA #1397 small turbo Julio's dual alky kit .. just tryin to break her in 87 GN New billet turbo stock long block julio's dual alky kit... 10.97 with only a 1.66 60ft

08-14-2009, 05:33 AM	#5 (permalink)
TURBO E38 Certified buick NUT Join Date: Jun 2007 Location: Delaware Coast Posts: 135	Thanks, but still want to know who takes the credit? WHO are the design engineers behind these and where are the Roots of first implementaion? ? DID GENERAL ELECTRIC or some TURBOPROP aircraft engine company do this twenty years ago? Garrett, Federal mogal, IHI, KKK, R-jay, plus a lot of companies make turbochargers that I never heard of. Is there a Industry wide trade journal on TURBOCHARGERS? I guess a patent search on turbine compressor impellers may be a start to find the origin and timeline. Thank you, Regards , TURBO E38 __________________ 1987 Canadian GN, PTE SLIC,RJC PP,Cheetah BB Stage 3, ATR 3" DP with racegate, 255LPH +hotiwire, accufab ADJFPR,Test pipe, Hooker exhaust,Denso heated O2,Mototron 60lb injectors TTweak chip OR EXTENDER 512 chip, Pete Tomka 3.5" cold air kit. LS1 MAF/translator,AUTOLITE XP iridium plugs@.035", ACCEL coil Pak, B.F. Goodrich TA 255/60-15 rear Tires <>235/60-15 Front Tires, fully boxed control arms, full brace kit,COMP 980's, Hardened rocker shafts,$99 TurboBuicks lightweight starter 1985 TURBO RIVIERA CONVERTIBLE<>(RARE 1 of 47) 30lb inj, Champion irons, Harland sharp roller rockers,Denso INDEXED iridium plugs ,Accel coil pak,Holley 255lph fuel pump,adj FPR,TA33C turbo,87ecm,Denso heated O2, TURBOTWEAK closed loop idle chip,Black magic FAN, flowkooler waterpump,Kenney holms big tube GN radiator,FW4 3:36 axle, 188/188 REED cryo treated cam, rollmaster timing chain

08-14-2009, 09:03 AM	#8 (permalink)
TURBO E38 Certified buick NUT Join Date: Jun 2007 Location: Delaware Coast Posts: 135	YES IT DOES MATTER TO ME I would like to know what I might be buying, Plus the more complex something is , the fun it is to talk about! Even the most simple thing you can think could keep 10 Scholars busy for a lifetime and just scratch the surface, Ofcousre , NOTHING ever done on this earth will matter given enough time, THE Human Race from this planet will cease to exist, and everything ever done here will not have mattered beacuse OUR SUN will ingulf the earth and melt everything down that ever existed, SO in the long RUN YOU ARE CORRECT, IT DOES NOT MATTER! __________________ 1987 Canadian GN, PTE SLIC,RJC PP,Cheetah BB Stage 3, ATR 3" DP with racegate, 255LPH +hotiwire, accufab ADJFPR,Test pipe, Hooker exhaust,Denso heated O2,Mototron 60lb injectors TTweak chip OR EXTENDER 512 chip, Pete Tomka 3.5" cold air kit. LS1 MAF/translator,AUTOLITE XP iridium plugs@.035", ACCEL coil Pak, B.F. Goodrich TA 255/60-15 rear Tires <>235/60-15 Front Tires, fully boxed control arms, full brace kit,COMP 980's, Hardened rocker shafts,$99 TurboBuicks lightweight starter 1985 TURBO RIVIERA CONVERTIBLE<>(RARE 1 of 47) 30lb inj, Champion irons, Harland sharp roller rockers,Denso INDEXED iridium plugs ,Accel coil pak,Holley 255lph fuel pump,adj FPR,TA33C turbo,87ecm,Denso heated O2, TURBOTWEAK closed loop idle chip,Black magic FAN, flowkooler waterpump,Kenney holms big tube GN radiator,FW4 3:36 axle, 188/188 REED cryo treated cam, rollmaster timing chain

08-14-2009, 12:15 PM	#9 (permalink)
Slow91z Registered User Join Date: Nov 2003 Location: Corydon, IN Posts: 2,323	Wow.......You ARE a nut __________________ Collin Hundley 87 GN - 10.73@127

08-14-2009, 01:36 PM	#11 (permalink)
pacecarta MAGNABUICK.com .. NJ rep Join Date: Oct 2004 Location: englishtown racewaypark Posts: 3,494	i should have known better than respond , hes not a scholar working on a paper... heres some insight to the mind of turbo e38 ,formerly turbo ebody NOT YELLOW but ORANGE for power 6 logo __________________ paul ....central NJ the 86 and some other Magna GNs having some fun at Atco Raceway http://videos.streetfire.net/video/e...8c013e4547.htm 2010BPG member... #2045

08-14-2009, 03:00 PM	#12 (permalink)
gbsean Not a Democrat any more.. Join Date: Jul 2005 Location: Flanders, N.J. Posts: 14,968	he is the only person on my ignore list.... __________________ UPCOMING BPG EVENTS 2011 TTA T-Type T-PARTY July 29,30,31 2011 11.599 @ 119.91 with issues Sean Ryder Buick Performance Group Chairman www.buickperformancegroup.com http://www.magnabuick.com/ see thread for Engine Specs http://www.turbobuicks.com/forums/wa...tml#post680751 happy now Rich

08-15-2009, 10:45 AM	#15 (permalink)
motorhead aka: mOtOrHeAd MiKe Join Date: Jan 2002 Location: Ottawa, Ontario Canada Posts: 5,970	LMFAO! This guy doesn't have the capacity to process the information that he is asking for; just talking out of his ass. __________________ \|'87 Monte Carlo SS\|'87 Turbo T\|'02 Camaro B4C\|'07 TrailBlazer SS\| Just scratching the surface going 12.1 @ 113.27mph w/1.79 60' (0-60mph in 3.8 seconds) - Specs? Click Here! She ain't pretty, she just looks that way...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Braided Turbo Oil Feed Hose With Billet Aluminum Inline Oil Filter	87 WE2	Parts For Sale	13	02-07-2008 09:29 PM
RE: FREE Stainless Steel Coil Mounting Screws	nos4gn	Group Purchases and Vendor Specials	0	02-27-2007 10:09 AM
Going on a diet	teamgn87	Buick V6 Turbo Tech	12	07-15-2006 08:46 AM
Billet aluminum T-stat housing $12 shipped	Rinaldi	Parts For Sale	1	04-15-2004 11:22 PM
Turbo Piston Rings	Zap	Buick V6 Turbo Tech	15	05-23-2002 07:21 AM