| | | | | | |
| | | | | ||
| | | | | ||
| | | | | ||
| | | | | ||
| | | | |||
 |
10-04-2008, 05:36 PM
| #1 (permalink) |
| I Buried Beachbum Here!  Join Date: Jun 2003 Location: Toronto
Posts: 10,812
| Gas be gone!! Not from ME! ;) The tank is out & has maybe 1/2 gallon sitting in it. I prefer to get it out but dont care to do the old Siphon Trick & taste gas all week!  What tricks do you guys use to get the last gallon out while its on the bench so to speak?  I know a Shop Vac is a BAD Idea!!  
__________________ 87 LTD. Purchased May 88 Doeskin leather, coach lites, moonroof & carpeted trunk. No Factory Hood Ornament!  Special order by the VP of GM Canada! Not another like it!  Lots of Go Fast goodies! 11.5 is as Fast as I go! Thats what the track told me! It's a Small World, but I wouldn't want to Paint It!! Last edited by Just a Six?? : 10-04-2008 at 05:57 PM. |
|  |
|
10-04-2008, 08:10 PM
| #2 (permalink) |
| Free Door Removal  Join Date: Jun 2005 Location: Port Crane, NY
Posts: 1,573
 | They sell small containers that you attach a hose and a vacuum pump to. You put the hose in the gas tank, then use the hand pump to suck the liquid out. They work great and I use mine all the time.....makes bleeding brakes a breeze also!! If you overfill your transmission they work great too... As another plus you can hook an airline where the vacuum pump goes and use that to fill rearends with fluid (it forces it out). Can also be used to run a small hose to the bottom of a chair, then when your friend sits in it you can walk over to the container and hit the lever on the air line to piss them off. Joe
__________________ 87 Cutlass powered by  Mods: THDP, Single 4", Erson 214/214, TE44, 60# mototrons, SMC Alky, Innovate LC1, Ported heads and intake by VPE, Wiseco Pistons, RJC Girdle, Ported TB, Powerstroke IC, HRParts Swaybar, Hoosier 28x10.5 with rolled quarters (no notch), no front swaybar, stock MAF, comp 90/10's, powerlogger and some other small stuff. 60' 1.6501 330' 4.7762 1/8 7.4230 @ 93.17 mph Has more in it but the transmission disagreed  .
|
|
| |
|
10-04-2008, 11:13 PM
| #3 (permalink) |
| 86george Join Date: Jan 2008 Location: kankakee, IL
Posts: 5
 | Get a cheap kerosene pump from any hardware store.Handy to have around the garage.
__________________ 86 gn stock block & heads.205/205 reeds,4 billets. te44,009s,3"maf,3"dp,bigneck stock ic,9.5"lockup. 3.73 gears,eaton posi,moser axles,90/10s front,koni adj rears with air bags.smc alky,adj fuel , adj waste, external pump,on prostars. |
| |
|
10-05-2008, 09:23 AM
| #4 (permalink) |
| I Buried Beachbum Here! Join Date: Jun 2003 Location: Toronto
Posts: 10,812
| Thanks Guys! I'll take a look around next time I'm out & see what they have here. 
__________________ 87 LTD. Purchased May 88 Doeskin leather, coach lites, moonroof & carpeted trunk. No Factory Hood Ornament! Special order by the VP of GM Canada! Not another like it! Lots of Go Fast goodies! 11.5 is as Fast as I go! Thats what the track told me! It's a Small World, but I wouldn't want to Paint It!! |
|
| |
|
10-05-2008, 10:51 PM
| #5 (permalink) |
| Registered User Join Date: Mar 2001 Location: Toronto, Ontario, Canada
Posts: 432
| Dave Check Walmart's auto section... they had $5.00 gizmo to siphon gas out of the tank. I've never seen it in C-Tire but I was never looking. Here is a trick I learn from my father... get a hose, fill it with water or gas if you want to reuse the gas. Once the hose is filled, hold or plug the one end so it doesn't leak, put the other one into the tank... un-plug the other end into a pail or container. The tank must be higher than the pail you are putting the gas into. That's how my father cleaned our fish tank. with 1/2 a gallon, it might be better to use a good old turkey baster... $1.00 at the Dollar Store!!!!!! good luck... dave
__________________ 87 GN - stock 86 TTYPE - accident prone 87 Limited - new toy |
|
| |
|
10-05-2008, 11:25 PM
| #6 (permalink) |
| Stupidest man alive.  Join Date: Dec 2003 Location: Beaufort, SC
Posts: 2,419
| Drain it into a pail or drain pan through the filler neck.
__________________ Steve- “It only gets worse...." 1987 GN, Moonroof, GNX dash, 109 .030 TRW Forged TE-62, G Body DP, 204/214cam, 60-65 Siemens inj, Extender chip, LS1 MAF, port matched intake and heads, Razor's Alky, Hotwired Denso 280 pump, Extreme Trans, Pats 3200 11 in. conv, Metco LCA's Monitored by:PLX WB, EGT, SM & DS 11.8 @ 117 w/ the 4.1 (RIP) 7/08 1987 Gray Regal T LS1 MAF, 32lb inj, Chip, mostly stock 2001 Jeep Cherokee 4.0 I6 4x4 |
|
| |
|
10-06-2008, 10:42 AM
| #7 (permalink) |
| I Buried Beachbum Here! Join Date: Jun 2003 Location: Toronto
Posts: 10,812
| I just grabbed a nice push-pull hand pump for $20 but for $14 they had a electric one with 2 batteries that had a Long skinny wand that sucks & 2ft of plastic hose. Looked neat but I didnt trust it being all cheap plastic & pretty flimsy looking. Dave, thats how I drain my 65 gallon fish tank! Pouring thru the filler neck is a good Idea! Thanks!
__________________ 87 LTD. Purchased May 88 Doeskin leather, coach lites, moonroof & carpeted trunk. No Factory Hood Ornament! Special order by the VP of GM Canada! Not another like it! Lots of Go Fast goodies! 11.5 is as Fast as I go! Thats what the track told me! It's a Small World, but I wouldn't want to Paint It!! |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What other vehicles came with our style coil pack and module? | Orlando_87GN | Buick V6 Turbo Tech | 34 | 12-29-2008 03:36 PM |
| 86-87 ECMs | CrashmasterJack | Buick V6 Turbo Tech | 6 | 09-08-2008 09:13 PM |
| Gas prices are getting out of hand-Lets get them back | ttypewhite | Buick Racers in Toronto and Surrounding Areas | 14 | 04-20-2008 08:20 PM |
| ?'s..... something for everyone to answer | buickbert | Buick V6 Turbo Tech | 6 | 11-22-2005 01:12 AM |
| Ecm Id# | 87 WE2 | Buick V6 Turbo Tech | 3 | 02-13-2004 02:24 PM |
Linear Mode
