Rear Upper control arm bushings

IRVJR · 05-13-2003, 05:53 PM

Are the front and rear bushings the same on the rear UCA's?

Thanks, Scott

earlbrown · 05-13-2003, 06:17 PM

yep. same thing goes in all the rears holes

earl

IRVJR · 05-13-2003, 06:19 PM

Thanks Earl. Why do some have different part numbers then?

Scott

Steve Wood · 05-13-2003, 06:49 PM

maybe a different rubber compound. Far as I can tell there is no differnce in size. If I had not left my bushing remover in Houston, I would have installed some new ones yesterday.

IRVJR · 05-13-2003, 06:55 PM

So the ones that go into the rear axle housing are the same as the ones in the front of the control arm. I was just wondering since someone gave me a set of what they thought were the rear ones, and now i was given stock upper arms with the poly bushings in the front holes. I just want to be sure before i tear into this project and find i have two sets of front bushings.

Scott

05-13-2003, 05:53 PM	#1 (permalink)
IRVJR Dr. Theopolis Join Date: Sep 2000 Location: Orlando Posts: 709	Rear Upper control arm bushings Are the front and rear bushings the same on the rear UCA's? Thanks, Scott __________________ 86 T Type WH1 Designer Package 86 GN <RIP 4-12-08>

05-13-2003, 06:17 PM	#2 (permalink)
earlbrown Iheartporn Join Date: Jul 2001 Location: lagrange ga Posts: 4,474	yep. same thing goes in all the rears holes earl __________________ PORN: It's not just for breakfast, lunch, and dinner anymore

05-13-2003, 06:19 PM	#3 (permalink)
IRVJR Dr. Theopolis Join Date: Sep 2000 Location: Orlando Posts: 709	Thanks Earl. Why do some have different part numbers then? Scott __________________ 86 T Type WH1 Designer Package 86 GN <RIP 4-12-08>

05-13-2003, 06:49 PM	#4 (permalink)
Steve Wood Scam Detector Enabled Join Date: Sep 2000 Location: East of Eden, Texas Posts: 41,350	maybe a different rubber compound. Far as I can tell there is no differnce in size. If I had not left my bushing remover in Houston, I would have installed some new ones yesterday. __________________ ------------------ A proud member of Stonewallers Against Bogus Technology Fix reason firmly in her seat, and call to her tribunal every fact, every opinion. Question with boldness even the existence of a God; because, if there be one, he must more approve of the homage of reason, than that of blindfolded fear. Thomas Jefferson . www.vortexbuicks-etc.com

05-13-2003, 06:55 PM	#5 (permalink)
IRVJR Dr. Theopolis Join Date: Sep 2000 Location: Orlando Posts: 709	So the ones that go into the rear axle housing are the same as the ones in the front of the control arm. I was just wondering since someone gave me a set of what they thought were the rear ones, and now i was given stock upper arms with the poly bushings in the front holes. I just want to be sure before i tear into this project and find i have two sets of front bushings. Scott __________________ 86 T Type WH1 Designer Package 86 GN <RIP 4-12-08>

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode