Guys with an AC Delete Plate

gnxtc2 · 10-21-2005, 04:39 PM

Guys with the AC Delete Plate a few questions:

What did you do with the extra wire that is part of the oval wire loom?

Did anyone make/makes a piece that will continue across the windshield to help with water running down the windshield. This piece will also make the car appear finished.

Thanks

Billy T.
gnxtc2@aol.com

pacecarta · 10-21-2005, 06:04 PM

i ran mine up the side then across the top , to secure i used zipties and snugged them under the bolts
there was a thread on one of the boards about the gutter , i dont have anything there but then again the car isnt going out in the rain

87bigcut · 10-23-2005, 02:20 PM

http://www.geocities.com/gforcejohn/heat.htm

There is the tray you are looking for I believe. I bought it because I didnt feel like fabricating one at the time. Real nice piece, easy install.

Joe

Georgegn · 10-23-2005, 06:24 PM

I got opne of those trays in my Regal..Great piece slides right in and makes it look factory....

Grumpy · 10-23-2005, 06:27 PM

Quote:

Originally Posted by Georgegn

I got opne of those trays in my Regal..Great piece slides right in and makes it look factory....

what are you doin here ???? GO to bed !!

Georgegn · 10-23-2005, 07:05 PM

your right...I have to get up in the AM for work.....hahahaa

10-21-2005, 04:39 PM	#1 (permalink)
gnxtc2 Registered User Join Date: Oct 2000 Location: Fort Lee, NJ Posts: 85	Guys with an AC Delete Plate Guys with the AC Delete Plate a few questions: What did you do with the extra wire that is part of the oval wire loom? Did anyone make/makes a piece that will continue across the windshield to help with water running down the windshield. This piece will also make the car appear finished. Thanks Billy T. gnxtc2@aol.com __________________ 87 GN, V2, T-70BB, 214/214 billet roller hyd, Eagle Crank, JE pistons, Burhead Headers, TA Street Eliminators ported/polished, FAST, TSM car

10-21-2005, 06:04 PM	#2 (permalink)
pacecarta MAGNABUICK.com .. NJ rep Join Date: Oct 2004 Location: englishtown racewaypark Posts: 3,252	i ran mine up the side then across the top , to secure i used zipties and snugged them under the bolts there was a thread on one of the boards about the gutter , i dont have anything there but then again the car isnt going out in the rain __________________ paul ....central NJ... only 2 days to go ...never gonna gettr' done!! the 86gn stock shortblock 71Q and some other boltons 1.46 10.41 129.85-etown in recovery , temp bone stock engine and turbo 12.50 107 @ 18psi -atco the 87gn te44 pac duttneck 11.31 120.9 @22psi 12.14 109.19 stock turbo at 22psi chips by turbotweak.com the 86 and some other Magna GNs having some fun at Atco Raceway http://videos.streetfire.net/video/e...8c013e4547.htm 2010BPG member... #2045

10-23-2005, 02:20 PM	#3 (permalink)
87bigcut Free Door Removal Join Date: Jun 2005 Location: Port Crane, NY Posts: 1,686	http://www.geocities.com/gforcejohn/heat.htm There is the tray you are looking for I believe. I bought it because I didnt feel like fabricating one at the time. Real nice piece, easy install. Joe __________________ 87 cutlass, used to be buick powered. Going to an LS based engine with an 88mm.

10-23-2005, 06:24 PM	#4 (permalink)
Georgegn Registered User Join Date: Jul 2002 Location: Boston Mass Posts: 80	I got opne of those trays in my Regal..Great piece slides right in and makes it look factory.... __________________ 87 turbo T 84 Regal 500 cube Caddey motor,no turbo lag...

10-23-2005, 07:05 PM	#6 (permalink)
Georgegn Registered User Join Date: Jul 2002 Location: Boston Mass Posts: 80	your right...I have to get up in the AM for work.....hahahaa __________________ 87 turbo T 84 Regal 500 cube Caddey motor,no turbo lag...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode