Cecil Last night 10/19

BrightSilverT · 10-20-2005, 08:14 AM

Well, finally made it to the track since my BONE stock runs with the stock TTA back in May that were a best of 13.27@102 and..............

Now with just a Chip (Eric at TT just took my Stock TTA chip & added TTC lock-up at 70/fan turn on at 170& left everything else stock) & Gutted Cat
& Adjustable wastegate (Cut & threaded the stocker) & Boost at 19-20,
NO K&N (Stock Canister) of course Walpro Pmp & Turbolink Scanning:

4 passes best of 12.844@ 107.50
1.900 - 60
8.242 - 1/8th
84.88 - 1/8th mph
12.844 1/4
107.50 1/4mph

I'm only launching at 2100 with zero to 1lb as this thing seems to take forever to spool, I think it's the dam Stock Canister-breating through a Straw
and the dam full exhaust

Anyhow it was a great night and good talking to Curt R, and of course Bob & Jim Barnes, thanks for comin down!!

nero · 10-20-2005, 08:18 AM

WOW!!!!

Nice runs with so little mods!!!!!!!!!!!!!

BrightSilverT · 10-20-2005, 08:21 AM

Hey Thanks Nero, I though so, but I'm sure somebody'll chime in and say

"Hey mine went 12.00Stock

"

Nordy racer · 10-20-2005, 09:05 AM

Your car was running nice last night for what you had done, BrightSliverT... i stopped over a talked to you for a bit, i was wearing the White T-shirt "MOTOGP racing" on it.. Stop on down the MAGNA page and post the nice time your going to go to cecil.. i should be running by next weekend...

Jake · 10-20-2005, 09:08 AM

Quote:

Originally Posted by Nordy racer

.. i should be running by next weekend...

Cool! I havent seen that car since the buick vs mustang event at atco last year. I'll bet the suspense is killing you.

Grumpy · 10-20-2005, 09:18 AM

Quote:

Originally Posted by BrightSilverT

Hey Thanks Nero, I though so, but I'm sure somebody'll chime in and say

"Hey mine went 12.00Stock

"

your not goin to just jump in the car an run 12.0s

get use to the car and it will fly with very few mods !!!

Nordy racer · 10-20-2005, 09:26 AM

Quote:

Originally Posted by Jake

Cool! I havent seen that car since the buick vs mustang event at atco last year. I'll bet the suspense is killing you.

Trust me it is... that event last year i didn't even get a run in, HA.. stock rear ends with 120,000miles on them, don't like 15 pound launches..

I should be all tuned up for this years Atco race.. i'm heading to andersons today to hopefully is the new motor get dynoed

...

Jake · 10-20-2005, 09:32 AM

Quote:

Originally Posted by Nordy racer

Trust me it is... that event last year i didn't even get a run in, HA.. stock rear ends with 120,000miles on them, don't like 15 pound launches..

I should be all tuned up for this years Atco race.. i'm heading to andersons today to hopefully is the new motor get dynoed

...

Thats awesome. That car should really fly now.

Nordy racer · 10-20-2005, 09:37 AM

i'm just praying that she stays in one piece

... i'm going to be heading to the track rental at MIR this month, so i'll post some numbers

.

Jake · 10-20-2005, 09:42 AM

Quote:

Originally Posted by Nordy racer

i'm just praying that she stays in one piece

... i'm going to be heading to the track rental at MIR this month, so i'll post some numbers

.

Nice! Im thinking about ditching work and going down there to spectate for a day. Are they dynoing the engine or the whole car (rear wheels)?

Nordy racer · 10-20-2005, 09:55 AM

Billy had it in the car and was putting the final pieces together.. i think the only thing he need to finish was to pull the old gas out, and put in the new C16. He was going to break in the car on the dyno..

Jake · 10-21-2005, 09:13 AM

That thing should be a real animal when its together. Good luck with it.

10-20-2005, 08:14 AM	#1 (permalink)
BrightSilverT Registered User Join Date: Jun 2003 Location: Beautiful Berks County, Pennsylvania Posts: 624	Cecil Last night 10/19 Well, finally made it to the track since my BONE stock runs with the stock TTA back in May that were a best of 13.27@102 and.............. Now with just a Chip (Eric at TT just took my Stock TTA chip & added TTC lock-up at 70/fan turn on at 170& left everything else stock) & Gutted Cat & Adjustable wastegate (Cut & threaded the stocker) & Boost at 19-20, NO K&N (Stock Canister) of course Walpro Pmp & Turbolink Scanning: 4 passes best of 12.844@ 107.50 1.900 - 60 8.242 - 1/8th 84.88 - 1/8th mph 12.844 1/4 107.50 1/4mph I'm only launching at 2100 with zero to 1lb as this thing seems to take forever to spool, I think it's the dam Stock Canister-breating through a Straw and the dam full exhaust Anyhow it was a great night and good talking to Curt R, and of course Bob & Jim Barnes, thanks for comin down!! __________________ Nice 10,000 Orig, mile 86 T-Type! Last edited by BrightSilverT : 10-20-2005 at 09:22 AM.

10-20-2005, 08:18 AM	#2 (permalink)
nero nero v. 2.0 Join Date: Sep 2004 Location: in Ed's profile, sad that stevemon gave up on me Posts: 3,256	WOW!!!! Nice runs with so little mods!!!!!!!!!!!!! __________________ "I like your Christ, I do not like your Christians. Your Christians are so unlike your Christ." - Mohandas (Mahatma) Gandhi share.ovi.com/knero (see the mycar channel for pix)

10-20-2005, 08:21 AM	#3 (permalink)
BrightSilverT Registered User Join Date: Jun 2003 Location: Beautiful Berks County, Pennsylvania Posts: 624	Hey Thanks Nero, I though so, but I'm sure somebody'll chime in and say "Hey mine went 12.00Stock " __________________ Nice 10,000 Orig, mile 86 T-Type!

10-20-2005, 09:05 AM	#4 (permalink)
Nordy racer Registered User Join Date: Mar 2004 Location: Sunny Cali Baby Posts: 931	Your car was running nice last night for what you had done, BrightSliverT... i stopped over a talked to you for a bit, i was wearing the White T-shirt "MOTOGP racing" on it.. Stop on down the MAGNA page and post the nice time your going to go to cecil.. i should be running by next weekend... __________________ ET TIME 9.65 at 139.7mph 6/30/07 Fontana Raceway CA NEW MOTOR::: Anderson Built 109 block- GN1R Champon Heads, Hyd Roller Cam, Forged Stroker Crank (eagle), H Beam Rods, 40 Over Pistons, GTQ76 turbo, V1 front mount, FAST system, 83lb injectors, ATI 9in convertor, 400 trans with brake, 373 gears

10-20-2005, 09:37 AM	#9 (permalink)
Nordy racer Registered User Join Date: Mar 2004 Location: Sunny Cali Baby Posts: 931	i'm just praying that she stays in one piece ... i'm going to be heading to the track rental at MIR this month, so i'll post some numbers . __________________ ET TIME 9.65 at 139.7mph 6/30/07 Fontana Raceway CA NEW MOTOR::: Anderson Built 109 block- GN1R Champon Heads, Hyd Roller Cam, Forged Stroker Crank (eagle), H Beam Rods, 40 Over Pistons, GTQ76 turbo, V1 front mount, FAST system, 83lb injectors, ATI 9in convertor, 400 trans with brake, 373 gears

10-20-2005, 09:55 AM	#11 (permalink)
Nordy racer Registered User Join Date: Mar 2004 Location: Sunny Cali Baby Posts: 931	Billy had it in the car and was putting the final pieces together.. i think the only thing he need to finish was to pull the old gas out, and put in the new C16. He was going to break in the car on the dyno.. __________________ ET TIME 9.65 at 139.7mph 6/30/07 Fontana Raceway CA NEW MOTOR::: Anderson Built 109 block- GN1R Champon Heads, Hyd Roller Cam, Forged Stroker Crank (eagle), H Beam Rods, 40 Over Pistons, GTQ76 turbo, V1 front mount, FAST system, 83lb injectors, ATI 9in convertor, 400 trans with brake, 373 gears

10-21-2005, 09:13 AM	#12 (permalink)
Jake Registered User Join Date: Sep 2004 Location: Quakertown PA 18951 Posts: 2,082	That thing should be a real animal when its together. Good luck with it. __________________ 1987 T 1996 Impala SS Daily Driver, needs to go... 2001 Camaro Z28 Hardtop, coming soon.. MAGNA Member www.MAGNABuick.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode