| | | | | ![]() | |
| | | | | ||
![]() | | | |||
| | | | | ||
| | | | | ||
| | | | |||
| | #1 (permalink) |
| Registered User | Where to put "t" fitting on boost gauge?? I’m having problems figuring out where to install the “t” fitting. According to gnttype.org's instructions, it is put on the fourth line from front attached to passenger side of throttle body, but the flexible line after the metal line is only about 8 inches long before it plugs into what I believe is the MAP sensor (has one screw securing in place.) The only straight area in this line is as it connects to the MAP. In the instructions, tthe guy installed the “t” 6 inches past the bend in the line towards the firewall, but my line barely longer than 6", so I don't know how I could install the "t" six inches past anything. Instructions also stated, “Snip the somewhat flexible tube (not the coupler) of the boost line.” What is the flexible coupler?? I don't wan to cut the wrong line. Am I looking at the wrong area to install the “t” fitting? Is my line just shorter because I have a TTA? Can anyone send me, keith.gannon@scott.af.mil, a pic of where the “t” fitting is installed on your car? Thank you very much for your time! |
| | |
| | #2 (permalink) |
| Norb's Creation is Here!! Join Date: Jun 2003 Location: Toronto
Posts: 10,534
| I dont have a TTA but they sound the same for this to me. If not enough Vac line then go buy a foot of it & install the T as stated. It doesnt have to be exactly 6 inches. Just install the T in the stock size peice or get the new line and just give yourself more line to T into.
__________________ 87 LTD. Purchased May 88 Doeskin leather, coach lites, moonroof & carpeted trunk. No Factory Hood Ornament! ![]() Special order by the VP of GM Canada! Not another like it! ![]() Lots of Go Fast goodies! 11.5 is as Fast as I go! Thats what the track told me! ![]() It's a Small World, but I wouldn't want to Paint It!! ![]() PS: My name is David & I have One screen name everywhere! |
| | |
| | #3 (permalink) |
| Boost Sux my Wallet Join Date: Aug 2003 Location: Mississippi Gulf Coast area
Posts: 1,116
| Just get some more rubber line and make the hose longer and tee into that.
__________________ 87 GN (3480lbs w/me & 1/2 tank) GT3255E, ESP FMIC, Razors Alky, Turbosaver, TA Headers, THDP w/test, ATR crossflow, TT, 38's, hopped up trans, Pats 10" 3k l/u, QA1r's, UMI Ups (adj) and lows, HR bar, MT DR's .2003 G35 Coupe Blk on BLk, JDM Clears, 18's, Prem PKG, Lthr, Bose....wifes car 2005 Harleys : Wide Glide & Duece ...Mucho Bling |
| | |
![]() |
| Thread Tools | |
| Display Modes | |
| |