Stainless Steel brake lines

Buicksx2 · 04-25-2004, 06:02 PM

Hi All,

Has anyone ever changed their brake lines to stainless and if so where did you buy them? Which vendor sells them?

Or would anyone know the part numbers from Russell or Earls that I could order from Summit or Jegs?

Thanks in advance.

MY8687T · 04-25-2004, 06:37 PM

try the right stuff that the name

Buicksx2 · 04-25-2004, 06:40 PM

Quote:

Originally posted by MY8687T
try the right stuff that the name

???? lost me

Buicksx2 · 04-25-2004, 07:15 PM

I should clarify........I an mot looking for the entire length of brake line but rather the two lines that go to the front brake calipers and the one line above the rear pumpkin then splits off to the two brake lines into the rear calipers.

I am sure I can get the rubber ones at a NAPA but wanna go stainless.

Thanks.

1FASTV6 · 04-25-2004, 07:29 PM

Try this Rich

JFH · 04-25-2004, 07:36 PM

http://www.p-s-t.com/ or www.russellperformance.com

JFH

1FASTV6 · 04-25-2004, 07:37 PM

http://www.classictube.com/

http://www.inlinetube.com/

http://www.paragonperformance.com/

Buicksx2 · 04-25-2004, 08:43 PM

Thanks guys..........inline tube has a set for our cars for $99, think I will order it.

Thanks again.

salvageV6 · 04-25-2004, 08:55 PM

I used the Russell kit on salvageV6 they worked great.

Glad I did, the rear line had a big slice/gouge in it when we took it off.

Of course that just exposed the weak link, rotted hard line that blew open.

Wish it didn't happen at the track at 111 mph.

Baer kit on the other car comes with it's own new lines.

Buicksx2 · 04-25-2004, 09:01 PM

Salvage,

Happen to have the part number of the lines? Did you do all three or just the rear one?

Remember what Russell got for the kit?

Thanks in advance.

ILBCNU6 · 04-25-2004, 09:27 PM

Rich, Russel p/n is: RUS-692100, $71.88 from Summit, I bought Earls for $69.99 for the G-Body Cars. I couldn't find the p/n's. Gene

Buicksx2 · 04-25-2004, 09:37 PM

Thanks Gene.......is that for all three hoses or just one?

Thanks for the help.

salvageV6 · 04-25-2004, 09:43 PM

That's for all 3 hoses.

I think I got mine at Jegs.

Here's a cut and paste from their website.
"799-692100 1979-88 G-Body $71.99 "

Had to use lotsa heat to get the rusty rear one off.

ILBCNU6 · 04-25-2004, 09:45 PM

Rich, that's for all three and comes with the new metal seals. I used them on my GN and daughter's T with no problems. Bleed them manually with key off with the PM. I don't like to run the pump any more than necessary on the PM. PS. Use the Dot 4 fluid as it has a much better life and higher boiling point. HTH Gene

Buicksx2 · 04-25-2004, 09:52 PM

Thanks again boys.....much appreciated.

04-25-2004, 06:02 PM	#1 (permalink)
Buicksx2 I got it figured out Join Date: Sep 2000 Location: At The WAWA Posts: 4,588	Stainless Steel brake lines Hi All, Has anyone ever changed their brake lines to stainless and if so where did you buy them? Which vendor sells them? Or would anyone know the part numbers from Russell or Earls that I could order from Summit or Jegs? Thanks in advance. __________________ Rich from Rich's Custom Auto in New Jersey. We don't know what we are doing, but we do know what we are charging!!! Piece of $hit in the middle of the road Home of the Jack,GPB,MPWB & MILFS Home of the 9 second Street cars 9.02@153.60, 1.33 60' in Newman "SLVRSTG" thru the Exhaust Buicksx2@AOL.com JCC Racing Team President Been banned 4 times in my life from the GSCA BB.....now who else can say that!!! Comedian

04-25-2004, 06:37 PM	#2 (permalink)
MY8687T Registered User Join Date: Mar 2004 Location: N.J Posts: 46	brake lines try the right stuff that the name

04-25-2004, 07:15 PM	#4 (permalink)
Buicksx2 I got it figured out Join Date: Sep 2000 Location: At The WAWA Posts: 4,588	I should clarify........I an mot looking for the entire length of brake line but rather the two lines that go to the front brake calipers and the one line above the rear pumpkin then splits off to the two brake lines into the rear calipers. I am sure I can get the rubber ones at a NAPA but wanna go stainless. Thanks. __________________ Rich from Rich's Custom Auto in New Jersey. We don't know what we are doing, but we do know what we are charging!!! Piece of $hit in the middle of the road Home of the Jack,GPB,MPWB & MILFS Home of the 9 second Street cars 9.02@153.60, 1.33 60' in Newman "SLVRSTG" thru the Exhaust Buicksx2@AOL.com JCC Racing Team President Been banned 4 times in my life from the GSCA BB.....now who else can say that!!! Comedian

04-25-2004, 07:29 PM	#5 (permalink)
1FASTV6 JR still sucks! Join Date: Oct 2000 Location: NY Posts: 5,009	Not sure this will help Try this Rich __________________ Artie *87 Turbo T WE4* Where's the POSTCARD BANDIT?? Scarred! Event photos: Artie's photos (Updated daily) Good to the last drop:Race Fan http://www.nypost.com/video/?vxSiteI...&vxBitrate=300 JCC Racing club president Rich Rezes found time to take a picture with the girls from Hot Rods Incorporated at "Pinks All Out' held at Raceway Park, NJ on July 25th and 26th. Client 9

04-25-2004, 07:36 PM	#6 (permalink)
JFH Registered User Join Date: Sep 2000 Location: River Edge, NJ Posts: 178	http://www.p-s-t.com/ or www.russellperformance.com JFH __________________ JOHN HORDYCH 87 GN Ta49 36#, big mouth intake,9-11 TC,new interior,KB exhaust,test pipe,Boost a pump,340 walbro,IMM trunk kit,Basic mods all gauges,Turbo Link,new trans by Eric Shertz,Translator, Extender chip ,Keith Mease downpipe, and 1 1/2 intercooler,70mm TB RJC power Plate,Dual Fans Hotchkis lower arms,air bags,scanmaster,running 20# boost with exylene & no knock Last edited by JFH : 04-25-2004 at 07:42 PM.

04-25-2004, 07:37 PM	#7 (permalink)
1FASTV6 JR still sucks! Join Date: Oct 2000 Location: NY Posts: 5,009	http://www.classictube.com/ http://www.inlinetube.com/ http://www.paragonperformance.com/

04-25-2004, 08:43 PM	#8 (permalink)
Buicksx2 I got it figured out Join Date: Sep 2000 Location: At The WAWA Posts: 4,588	Thanks guys..........inline tube has a set for our cars for $99, think I will order it. Thanks again. __________________ Rich from Rich's Custom Auto in New Jersey. We don't know what we are doing, but we do know what we are charging!!! Piece of $hit in the middle of the road Home of the Jack,GPB,MPWB & MILFS Home of the 9 second Street cars 9.02@153.60, 1.33 60' in Newman "SLVRSTG" thru the Exhaust Buicksx2@AOL.com JCC Racing Team President Been banned 4 times in my life from the GSCA BB.....now who else can say that!!! Comedian

04-25-2004, 08:55 PM	#9 (permalink)
salvageV6 Registered User Join Date: Sep 2000 Location: Connecticut, USA Posts: 6,408	I used the Russell kit on salvageV6 they worked great. Glad I did, the rear line had a big slice/gouge in it when we took it off. Of course that just exposed the weak link, rotted hard line that blew open. Wish it didn't happen at the track at 111 mph. Baer kit on the other car comes with it's own new lines.

04-25-2004, 09:01 PM	#10 (permalink)
Buicksx2 I got it figured out Join Date: Sep 2000 Location: At The WAWA Posts: 4,588	Salvage, Happen to have the part number of the lines? Did you do all three or just the rear one? Remember what Russell got for the kit? Thanks in advance. __________________ Rich from Rich's Custom Auto in New Jersey. We don't know what we are doing, but we do know what we are charging!!! Piece of $hit in the middle of the road Home of the Jack,GPB,MPWB & MILFS Home of the 9 second Street cars 9.02@153.60, 1.33 60' in Newman "SLVRSTG" thru the Exhaust Buicksx2@AOL.com JCC Racing Team President Been banned 4 times in my life from the GSCA BB.....now who else can say that!!! Comedian

04-25-2004, 09:27 PM	#11 (permalink)
ILBCNU6 Registered User Join Date: Dec 2001 Location: New Hope, MN. US Posts: 679	Rich, Russel p/n is: RUS-692100, $71.88 from Summit, I bought Earls for $69.99 for the G-Body Cars. I couldn't find the p/n's. Gene

04-25-2004, 09:37 PM	#12 (permalink)
Buicksx2 I got it figured out Join Date: Sep 2000 Location: At The WAWA Posts: 4,588	Thanks Gene.......is that for all three hoses or just one? Thanks for the help. __________________ Rich from Rich's Custom Auto in New Jersey. We don't know what we are doing, but we do know what we are charging!!! Piece of $hit in the middle of the road Home of the Jack,GPB,MPWB & MILFS Home of the 9 second Street cars 9.02@153.60, 1.33 60' in Newman "SLVRSTG" thru the Exhaust Buicksx2@AOL.com JCC Racing Team President Been banned 4 times in my life from the GSCA BB.....now who else can say that!!! Comedian

04-25-2004, 09:43 PM	#13 (permalink)
salvageV6 Registered User Join Date: Sep 2000 Location: Connecticut, USA Posts: 6,408	That's for all 3 hoses. I think I got mine at Jegs. Here's a cut and paste from their website. "799-692100 1979-88 G-Body $71.99 " Had to use lotsa heat to get the rusty rear one off.

04-25-2004, 09:45 PM	#14 (permalink)
ILBCNU6 Registered User Join Date: Dec 2001 Location: New Hope, MN. US Posts: 679	Rich, that's for all three and comes with the new metal seals. I used them on my GN and daughter's T with no problems. Bleed them manually with key off with the PM. I don't like to run the pump any more than necessary on the PM. PS. Use the Dot 4 fluid as it has a much better life and higher boiling point. HTH Gene

04-25-2004, 09:52 PM	#15 (permalink)
Buicksx2 I got it figured out Join Date: Sep 2000 Location: At The WAWA Posts: 4,588	Thanks again boys.....much appreciated. __________________ Rich from Rich's Custom Auto in New Jersey. We don't know what we are doing, but we do know what we are charging!!! Piece of $hit in the middle of the road Home of the Jack,GPB,MPWB & MILFS Home of the 9 second Street cars 9.02@153.60, 1.33 60' in Newman "SLVRSTG" thru the Exhaust Buicksx2@AOL.com JCC Racing Team President Been banned 4 times in my life from the GSCA BB.....now who else can say that!!! Comedian

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode