| | | | | | |
| | | | | ||
| | | | | ||
| | | | | ||
| | | | | ||
| | | | |||
 |
08-12-2001, 12:13 PM
| #1 (permalink) |
| Junior Member  Join Date: Aug 2001 Location: Ontario Canada
Posts: 7
 |  MAP sensor question Are the turbo buick MAP sensors 2-BAR, or 3-BAR sensors? I knoiw the TTA sensors are 3's, but i can't find them anywhere except the dealer. I can get the GN sensor cheap from a wholesaler, i just need to know if it will work for me.
__________________ 1990 Chrysler Lebaron GTC VNT, (1 of <500) low 14's @15psi |
|  |
|
08-12-2001, 03:35 PM
| #2 (permalink) |
| Boorn Looser Join Date: May 2001
Posts: 21,189
| I have to assume they are 2 bar, cause you have to buy a 3 bar for the "Boost sensing" option to work with T-Link. (But you know what assumptions can get you)
__________________ With ten nurses knocked out in just the first week, Frank realized that building the Old Boxers home next to the bell factory wasn't such a great idea Join the NRA |
|
| |
|
08-12-2001, 03:44 PM
| #3 (permalink) |
| Habitual Line Stepper  Join Date: Dec 2000 Location: Eugene,Or
Posts: 401
| yeah,the stocker is 2 bar,the tta's is 3 bar. be aware,you can get a 2 bar in a 3 bar box.ask me how i know  ."no returns on electrical parts" anybody need a brand new 2 bar map sensor,cheap? later,sean ------------------ 84gn,spearco fmic,ta-60,ported tb,lee thompson headers/3"dp/deltagate,42.5#inj.,mm chip,87 ecm,trans+,3"maf,3"maf pipe,v8 radiator/electric fan,kb ramair,fiberglass bumpers,turbolink,hotwired walbro 340,accufab fpr,new valvesprings,bilsteins,billet lowers,eibachs,pinion snubber,airbags
__________________ 84 GN 12.01@114.5 99 F250 PSD/6 spd 65 Plymouth Sport Fury Twin Turbo coming soon... |
|
| |
|
08-12-2001, 04:07 PM
| #4 (permalink) |
| Boorn Looser Join Date: May 2001
Posts: 21,189
|  Anyone know if the 3 bar units came on some other GM cars? (planning ahead for future junkyard trips). That is why I won't buy electrical parts from a GM dealer, WFO. Some of the other stores (advance auto, etc) can get AC\Delco parts and will take returns. The 3 bar MAP sensor is available at NAPA CRB219481 $75.99 Ken "TurboLink" Mosher also has the GM units for $68.00 [This message has been edited by Zap (edited August 12, 2001).]
__________________ With ten nurses knocked out in just the first week, Frank realized that building the Old Boxers home next to the bell factory wasn't such a great idea Join the NRA |
|
| |
|
08-12-2001, 09:13 PM
| #5 (permalink) |
| Junior Member Join Date: Aug 2001 Location: Ontario Canada
Posts: 7
| Oh well, it was a chance. The listings showed it as the same sensor used ont eh SC3800's int he FWD cars, and i didn't think they'd be 3-BAR, but thought i'd ask anyways. It's actually for a Chrysler 2.2 application, i've run out of MAP sensor at 15 psi 
__________________ 1990 Chrysler Lebaron GTC VNT, (1 of <500) low 14's @15psi |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
