| | | | | | |
| | | | | ||
| | | | | ||
| | | | | ||
| | | | | ||
| | | | |||
 |
02-15-2007, 12:02 AM
| #1 (permalink) |
| 27psi on pump gas!  Join Date: Apr 2005 Location: Smokey Mtns, in TN
Posts: 73
| TAI class ? Why is the TAI class always left out? i never see any rules conserning it...
__________________ 1986 GN, 235cu. Bal & blueprinted 109 block, PT-70 gtq, Billit mains on 2&3, ARP main studs, J&E pistons/dry film coated w/ ceramic tops, Dry-Film coated bearings(rods,main,cam), M&A stage III alum heads-race ported-wire locked w/ARP studs, ATR headers, Hyd. flat tappet 221/218-525lift/cam, crower 1.65 roller rockers, race ported intake, 70mm Acufab TB, percision plenum,3"THDP, 85lb inj flow matched, P.T.E S/L IC, Razors ALKY kit, 9" 3800 N-stall N/L art-carr conv, Moser axles, H&R bar |
|  |
|
02-16-2007, 08:20 AM
| #2 (permalink) |
| Resident Idiot  Join Date: Sep 2000 Location: Orlando, FL USA
Posts: 10,131
 | Never heard of it? What is it?
__________________ Check Out MikesStuff4Sale.com to view my used parts!  ------------------------------------------------ 1987 Buick Grand National Budget 4.1, 204/214 cam, TA-49 Turbo, Stockish Heads, V4, MSD50's, TH DP, JayJackson 62mm TB, Translator plus Extender powered. 3680# with pilot ------------------------------------------------ 1987 Turbo T with 5,888 Original miles FOR SALE! ------------------------------------------------ 1993 Mazda RX-7 4.1 Buick Powered 11.20 @ 128mph (2.4 60')!  |
|
| |
|
02-16-2007, 10:27 AM
| #3 (permalink) |
| I piss excellence!!!  Join Date: Nov 2004 Location: Where you at?
Posts: 1,637
| Turbo Alky Injection class. There was some discussion about 2 months ago on the other board about it, I think it is very much like the TSM class. Just with the addition of alky. I think the only place this class is being held at is in BG.
__________________ 1987 Buick Grand National,3" THDP with dumper, 3" Torque Tech exhaust with race Dynomax Ultraflo's, 60#er's, hd valve springs, RJC powerplate, xp hotwired, volt booster, ta 61 w. 63 housing, 17 row stock location, Street/Strip trans by Eric Schertz (RIP), 9.5 viglante 3000 stall L/U couple of other goodies, its nice to be fast... 11.69 @ 117.22  2006 JCC Rookie of the year ... Put that in your pipe and smoke it!!! BPG #: 1971 |
|
| |
|
02-16-2007, 10:35 AM
| #4 (permalink) |
| Resident Idiot Join Date: Sep 2000 Location: Orlando, FL USA
Posts: 10,131
| Sounds popular 
__________________ Check Out MikesStuff4Sale.com to view my used parts! ------------------------------------------------ 1987 Buick Grand National Budget 4.1, 204/214 cam, TA-49 Turbo, Stockish Heads, V4, MSD50's, TH DP, JayJackson 62mm TB, Translator plus Extender powered. 3680# with pilot ------------------------------------------------ 1987 Turbo T with 5,888 Original miles FOR SALE! ------------------------------------------------ 1993 Mazda RX-7 4.1 Buick Powered 11.20 @ 128mph (2.4 60')! |
|
| |
|
02-16-2007, 04:19 PM
| #5 (permalink) | |
| Registered User  Join Date: Sep 2000 Location: Andover, Ma
Posts: 10,934
| Quote:
I'd almost say its more popular than all the other classes because we are goin to run in it 
__________________ Dan dont run your mouth if you cant run your car  86/87 GN and 89 TTA .. tons of parts !! Time to get out! Stuff has to go !!! Otherwise I am cutting it up and throwing it away email ttastage2@yahoo.com | |
|
| |
|
01-15-2008, 08:16 PM
| #6 (permalink) |
| The Dark Jedi  Join Date: Jul 2006 Location: Winchester, TN
Posts: 565
| Alot of people are interested in it actually!
__________________ 1986 Grand National RJC Power Plate and Plenum, Accufab 70mm Throttle Body, RJC Engine Girdle with Crank Scraper, RJC Razor Pulleys, Diamond Racing Pistons, Comp Roller Cam, T&D Roller Rockers, Roll Master Timing Set, Motron 60 Fuel Injectors, Champion Intake, Ported Stock Heads, Cometic Head Gaskets, Turbo Tweak Chip, Russ Merritt Plug Wires, Walbro Fuel Pump with Hot Wire Kit, Mickey Thompson Drag Radials, Scan Master, 4" MAF Pipe, Terry Houston 3" Downpipe, Precision 6776 BB Turbo, Precision Stock Location Intercooler, Dual Nozzle ALKY Control Kit, RJC 3" Up Pipe, Power Logger Merritt Turbo Buick Performance Powerhouse Performance and Machine |
|
| |
|
01-15-2008, 08:53 PM
| #7 (permalink) |
| U.S. Citizen  Join Date: Jul 2005 Location: Flanders, N.J.
Posts: 9,350
 | The Buick Performance Group has an event at its National meet this year......check out the link....as long as it is street legal...run what you brung..to quote Mr Grumpy.....heads up...11.00 break out...any turbo...pro tree...luck of draw ladder...even have a sponsor Snow Performance: Home
__________________ 1/4 13.592 MPH 93.09 best Et to date 1/4 14.036 MPH 105.91 best MPH to date Tuning in Progress www.jccracing.com www.buickperformancegroup.com see thread for Engine Specs http://www.turbobuicks.com/forums/wa...tml#post680751 happy now Rich |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
