Catalytics

daveismissing · 10-09-2008, 10:01 PM

Somebody mentioned Karbelt catalytics,
I can't seem to navigate their site?
(I surprised they are still around)
Is there a "brand" or link?
suppose one has to add flanges?
Can I get a new y-pipe that will fit above to the remaining stock parts?
D

BEACH BUM · 10-09-2008, 10:06 PM

If you have a 3" DP, you could order a 3" plug-n-play cat from Kirbans...don't gut it though...that would be illegal.

daveismissing · 10-09-2008, 10:39 PM

Why is that pipe 2 piece if it only fits stock parts?
(per description)

BEACH BUM · 10-09-2008, 10:41 PM

I'm referring to the cat...Kirbans DP is a 2 piece design.

davpar · 10-10-2008, 07:49 AM

If you're out in the West End (ie Mississauga etc)....suggest you take your car in to see Jack at Zoro Muffler, they can custom fit anything.......I've been very happy with all the work they've done for me. They do great exhaust work and can also do some custom mandrel bending. He has a hi-flow SS 3" metal core cat that flows 578CFM. It's suited for forced induction applications. Have it on my car. These flow about 40% better than the typical ceramic core converters. They're about 10" long. Works real good with my 3" THDP and 2.5" ATR Exhaust System. I couldn't be happier...(and it's street legal too)! Uses a band clamp so it's easy to remove if you decide to put on your straight pipe / dump for the track, it takes like 5 minutes.

dave

10-09-2008, 10:01 PM	#1 (permalink)
daveismissing ancient Join Date: Sep 2008 Posts: 70	Catalytics Somebody mentioned Karbelt catalytics, I can't seem to navigate their site? (I surprised they are still around) Is there a "brand" or link? suppose one has to add flanges? Can I get a new y-pipe that will fit above to the remaining stock parts? D __________________ GM's finest: '87GN ...Worst: '02 Rendezvous The other other other other other Dave(TM).

10-09-2008, 10:39 PM	#3 (permalink)
daveismissing ancient Join Date: Sep 2008 Posts: 70	Why is that pipe 2 piece if it only fits stock parts? (per description) __________________ GM's finest: '87GN ...Worst: '02 Rendezvous The other other other other other Dave(TM).

10-10-2008, 07:49 AM	#5 (permalink)
davpar Registered User Join Date: Dec 2007 Location: Mississauga, Ontario, Canada Posts: 147	Cat If you're out in the West End (ie Mississauga etc)....suggest you take your car in to see Jack at Zoro Muffler, they can custom fit anything.......I've been very happy with all the work they've done for me. They do great exhaust work and can also do some custom mandrel bending. He has a hi-flow SS 3" metal core cat that flows 578CFM. It's suited for forced induction applications. Have it on my car. These flow about 40% better than the typical ceramic core converters. They're about 10" long. Works real good with my 3" THDP and 2.5" ATR Exhaust System. I couldn't be happier...(and it's street legal too)! Uses a band clamp so it's easy to remove if you decide to put on your straight pipe / dump for the track, it takes like 5 minutes. dave

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-09-2008, 10:06 PM	#2 (permalink)
BEACH BUM Registered User Join Date: Aug 2008 Posts: 699	If you have a 3" DP, you could order a 3" plug-n-play cat from Kirbans...don't gut it though...that would be illegal.

10-09-2008, 10:41 PM	#4 (permalink)
BEACH BUM Registered User Join Date: Aug 2008 Posts: 699	I'm referring to the cat...Kirbans DP is a 2 piece design.