Parts forsale

ttypewhite · 07-05-2008, 05:12 PM

JUST WANT TO GO ON THE RECORD SAYING, PARTS WILL GO TO THE ONES WHO DROP THE MONEY FIRST, NOT WHO POSTS FIRST. i HAVE DONE IT BY WHO POSTS FIRST AND THEY END UP PULLING MY CHAIN AND RUIN ME SELLING SOMETHING TO A POTENTIAL BUYER. SO IF YOU WANT IT, YOU BETTER ACT FAST AND SAY SO AND i WILL HOLD IT FOR YOU.

Coolant $15/ windshield washer fluid tanks $10

Front Air dams $50

stock ecu make me a offer

airbags $50

guage pod

accessory bracket for AC/tensioner/alt $50each
Stock fuel rail with #8 fitting for $30

Felpro 1007 gaskets

stock turbo in good condition $200

Stock heads fully assembled $75

stock intercooler bracket $20

2.5" intercooler pipes (Eastern) make me a offer

Lower door panels $100

stock turbo sheilds $20

T-tops $150 for both

powermaster units -Dont know if they work so make me a offer

ttypewhite · 07-05-2008, 05:22 PM

seats out of my first white t-type/ back seat and passenger seat are in decent shape, just need cleaning, drivers seat has a couple rips in it $300 for all

Stock tranny $550

Polished stock valve covers $90

4" chrome MAF pipe with evac port $75

2.5" Hooker downpipe with wastegate $250

lower kick panel for speakers LT & RT $100 panels are the exact same colour although the pics show otherwise & are in good shape

ttypewhite · 07-05-2008, 05:31 PM

Make me a offer stuff
2 TV cables, 1 shifter cable and 1 dip stick for tranny

good peg leg carrier

dash grey/ blue

stall convertor sheilds & stock air box

tail lenses

front bumper supports

stock crank pulley & balancer

stock plenums and throttle bodies

stock motor mounts 3 sets all in decent shape

ttypewhite · 07-05-2008, 05:43 PM

tranny to rad lines, 2 tranny dip sticks, 1 shfter cable & stock brake pedal

2.5" Hooker mufflers , no holes, just need some WD40 to clean them

stock downpipe and shifter linkage

power seat rack and 3" res muffler

stock fan

turbo support brackets (have 4 of them)

stock intercooler

2.25" blue silicone hose

2 good crack free passenger side headers

polished tensioner and reinforced one

powersteering res (have 4 of them)

ttypewhite · 07-05-2008, 05:44 PM

stock oil return line great shape

1blk and one red torque strap

driver side header (has been welded)

stock valve covers and rocker arms

There is more but I am friggin beat

Squid4life · 07-05-2008, 06:05 PM

possibly interested in a TB and the 1007's. How much shipped to 92124?

Quick Toy · 07-05-2008, 06:19 PM

I'm interested in an ECM, throttlebody, converter shield, and a crank pulley.
I'll PM you later tonight or tomorrow.
Paul

ttypewhite · 07-05-2008, 06:28 PM

Quote:

Originally Posted by Squid4life

possibly interested in a TB and the 1007's. How much shipped to 92124?

$100 for head gaskets and $20 for thottlebody and $15 for shipping

Paul B · 07-05-2008, 09:59 PM

How much for a TB shipped to K0G 1J0?

broke1 · 07-05-2008, 10:01 PM

Ill take a tb(complete as u have) and the airbags if youll do it for $70 shipped...

87GN4412 · 07-06-2008, 12:13 AM

I will take it and I can pick it up and pay cash if it will fit my stock MAF. Please let me know if it will. I am running a stock air box now.
Ted Drive Safe.

Gnash86 · 07-06-2008, 02:04 AM

Sent p.m. with a offer on a few things let me know.

Thanks John

Just a Six?? · 07-06-2008, 01:24 PM

Quote:

Originally Posted by 87GN4412

I will take it and I can pick it up and pay cash if it will fit my stock MAF. Please let me know if it will. I am running a stock air box now.
Ted Drive Safe.

Ted,
Stock Maf is 3" so you need adapters. With a stock air box & maf you have nothing to gain from it really. Unless you want to upgrade the rest later?

87GN4412 · 07-06-2008, 08:24 PM

Thanks I will look for a complete setup, I think I found one just waiting for a reply. Ted Drive Safe

Quote:

Originally Posted by Just a Six??

Ted,
Stock Maf is 3" so you need adapters. With a stock air box & maf you have nothing to gain from it really. Unless you want to upgrade the rest later?

07-05-2008, 05:12 PM	#1 (permalink)
ttypewhite Registered User Join Date: Feb 2004 Location: T-Dot Posts: 807	Parts forsale JUST WANT TO GO ON THE RECORD SAYING, PARTS WILL GO TO THE ONES WHO DROP THE MONEY FIRST, NOT WHO POSTS FIRST. i HAVE DONE IT BY WHO POSTS FIRST AND THEY END UP PULLING MY CHAIN AND RUIN ME SELLING SOMETHING TO A POTENTIAL BUYER. SO IF YOU WANT IT, YOU BETTER ACT FAST AND SAY SO AND i WILL HOLD IT FOR YOU. Coolant $15/ windshield washer fluid tanks $10 Front Air dams $50 stock ecu make me a offer airbags $50 guage pod accessory bracket for AC/tensioner/alt $50each Stock fuel rail with #8 fitting for $30 Felpro 1007 gaskets stock turbo in good condition $200 Stock heads fully assembled $75 stock intercooler bracket $20 2.5" intercooler pipes (Eastern) make me a offer Lower door panels $100 stock turbo sheilds $20 T-tops $150 for both powermaster units -Dont know if they work so make me a offer __________________ **NOVELLUS GRAPHICS RESOURCES FOR YOUR PRINT, PREPRESS AND CREATIVE NEEDS** www.novellusgraphics.com 9.94@ 135mph with a 1.37 sixty foot with lasts year setup. New 2008 setup is alive and running http://videos.streetfire.net/video/e...56017164c6.htm www.anderson-performance.com 410-282-9335 DLS Engine Development 886 E 900 N Wheatfield IN 46392 219-956-3653 Last edited by ttypewhite : 07-05-2008 at 06:42 PM.

07-05-2008, 05:22 PM	#2 (permalink)
ttypewhite Registered User Join Date: Feb 2004 Location: T-Dot Posts: 807	seats out of my first white t-type/ back seat and passenger seat are in decent shape, just need cleaning, drivers seat has a couple rips in it $300 for all Stock tranny $550 Polished stock valve covers $90 4" chrome MAF pipe with evac port $75 2.5" Hooker downpipe with wastegate $250 lower kick panel for speakers LT & RT $100 panels are the exact same colour although the pics show otherwise & are in good shape __________________ **NOVELLUS GRAPHICS RESOURCES FOR YOUR PRINT, PREPRESS AND CREATIVE NEEDS** www.novellusgraphics.com 9.94@ 135mph with a 1.37 sixty foot with lasts year setup. New 2008 setup is alive and running http://videos.streetfire.net/video/e...56017164c6.htm www.anderson-performance.com 410-282-9335 DLS Engine Development 886 E 900 N Wheatfield IN 46392 219-956-3653

07-05-2008, 05:31 PM	#3 (permalink)
ttypewhite Registered User Join Date: Feb 2004 Location: T-Dot Posts: 807	Make me a offer stuff 2 TV cables, 1 shifter cable and 1 dip stick for tranny good peg leg carrier dash grey/ blue stall convertor sheilds & stock air box tail lenses front bumper supports stock crank pulley & balancer stock plenums and throttle bodies stock motor mounts 3 sets all in decent shape __________________ **NOVELLUS GRAPHICS RESOURCES FOR YOUR PRINT, PREPRESS AND CREATIVE NEEDS** www.novellusgraphics.com 9.94@ 135mph with a 1.37 sixty foot with lasts year setup. New 2008 setup is alive and running http://videos.streetfire.net/video/e...56017164c6.htm www.anderson-performance.com 410-282-9335 DLS Engine Development 886 E 900 N Wheatfield IN 46392 219-956-3653

07-05-2008, 05:43 PM	#4 (permalink)
ttypewhite Registered User Join Date: Feb 2004 Location: T-Dot Posts: 807	tranny to rad lines, 2 tranny dip sticks, 1 shfter cable & stock brake pedal 2.5" Hooker mufflers , no holes, just need some WD40 to clean them stock downpipe and shifter linkage power seat rack and 3" res muffler stock fan turbo support brackets (have 4 of them) stock intercooler 2.25" blue silicone hose 2 good crack free passenger side headers polished tensioner and reinforced one powersteering res (have 4 of them) __________________ **NOVELLUS GRAPHICS RESOURCES FOR YOUR PRINT, PREPRESS AND CREATIVE NEEDS** www.novellusgraphics.com 9.94@ 135mph with a 1.37 sixty foot with lasts year setup. New 2008 setup is alive and running http://videos.streetfire.net/video/e...56017164c6.htm www.anderson-performance.com 410-282-9335 DLS Engine Development 886 E 900 N Wheatfield IN 46392 219-956-3653

07-05-2008, 05:44 PM	#5 (permalink)
ttypewhite Registered User Join Date: Feb 2004 Location: T-Dot Posts: 807	stock oil return line great shape 1blk and one red torque strap driver side header (has been welded) stock valve covers and rocker arms There is more but I am friggin beat __________________ **NOVELLUS GRAPHICS RESOURCES FOR YOUR PRINT, PREPRESS AND CREATIVE NEEDS** www.novellusgraphics.com 9.94@ 135mph with a 1.37 sixty foot with lasts year setup. New 2008 setup is alive and running http://videos.streetfire.net/video/e...56017164c6.htm www.anderson-performance.com 410-282-9335 DLS Engine Development 886 E 900 N Wheatfield IN 46392 219-956-3653

07-05-2008, 06:05 PM	#6 (permalink)
Squid4life Registered User Join Date: Nov 2004 Location: Wichita, KS Posts: 33	possibly interested in a TB and the 1007's. How much shipped to 92124? __________________ 85 GN, converted to 87 IC'ed stuff. TE-44, 42.5# inj, Ron Anderson ported big valve heads, ported stock intake, 204/214 cam, 3" THDP, test pipe w/dump, hooker 2 1/2" dual exhaust, orange stripe 2800 converter, wired 340, DIY turbo saver, TLink 4.0, Tach, boost, knock, oil PSI, H20 temp gauges, Turbo Tweak chips!!!

07-05-2008, 06:19 PM	#7 (permalink)
Quick Toy Registered User Join Date: Oct 2000 Location: Toronto, Canada Posts: 1,387	I'm interested in an ECM, throttlebody, converter shield, and a crank pulley. I'll PM you later tonight or tomorrow. Paul __________________ 1972 Toyota Celica with an 87 GN drive train.

07-05-2008, 09:59 PM	#9 (permalink)
Paul B Registered User Join Date: May 2003 Location: Kemptville, ON Posts: 685	How much for a TB shipped to K0G 1J0? __________________ '87 Turbo-T 13.19 @ 102MPH My Buick's Cardomain site. God bless this rocket car and all who ride in it

07-05-2008, 10:01 PM	#10 (permalink)
broke1 Registered User Join Date: Jan 2004 Posts: 1,093	Ill take a tb(complete as u have) and the airbags if youll do it for $70 shipped... __________________ My engine management is setup just how I like my girls. Really rich and really retarded.

07-06-2008, 12:13 AM	#11 (permalink)
87GN4412 87 GN Midnight Dream Join Date: Jan 2008 Location: Innisfil, Ontario, Canada Posts: 136	4" chrome MAF pipe with evac port $75 I will take it and I can pick it up and pay cash if it will fit my stock MAF. Please let me know if it will. I am running a stock air box now. Ted Drive Safe. Last edited by 87GN4412 : 07-06-2008 at 01:13 AM.

07-06-2008, 02:04 AM	#12 (permalink)
Gnash86 Registered User Join Date: Dec 2001 Posts: 44	Sent p.m. with a offer on a few things let me know. Thanks John

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NOS suspension parts, Used misc; engine, exterior, interior, parts (with PICS)	87 WE2	Parts For Sale	8	03-05-2008 01:45 PM
Parts forsale	ttypewhite	Buick Racers in Toronto and Surrounding Areas	5	02-28-2008 06:26 PM
1987 GN PARTOUT!! PARTS PARTS PARTS!!!	Grand nati0nal	Parts For Sale	16	10-18-2007 09:39 PM
Parts Forsale!!	Rob Nolan	Parts For Sale	2	10-16-2007 11:27 PM
Local parts list forsale	ttypewhite	Buick Racers in Toronto and Surrounding Areas	13	07-29-2007 06:16 PM