Garage Sale.

motorhead · 06-02-2008, 04:24 PM

A wide assortment of chips:
Two 83pph Siemens Low-Z - TurboTweak 100 octane - $60ea
Two 36pph Blue Tops - Jay Carter 94 & 100 octane - $30ea
Two+ Stock injectors - Thrasher 92 & Factory - $30ea

DS Inner fender - It is plastic and not cut up - $50

Set of 86-87 T-type wheels (2 centre caps) - Nice condition for daily use or...

- $300

3 x GM MAFs - Current condition is unknown (other than in a box). I drove my car on them, went low 12s, and boxed them up for MAFT Pro - $100 for all three.

Complete TurboLink v3.0x w/ Boost Sensing Harness (you will need to buy a GM 3 bar MAP) - $175
-> Comes with v2.0x as well, original user manual and other stuff.

Complete Direct Scan v1.52 - $140
-> Comes with original box, 3.5" diskette is long gone; the software is available here: DirectScan News

I have a bunch of maroon t-top interior parts from an 86 T-type as well...

Pics are available upon request.

email: michael_lis@whitetrashdesign.ca
or call me in the evenings at 289-298-5185

1987ttype · 06-02-2008, 05:31 PM

PM sent re: t-type wheels.

Cheers

NO1B4ME · 06-02-2008, 08:08 PM

Hi Mike.... Sent you a PM on the DS inner fender.
Thanks
Rob

motorhead · 06-03-2008, 08:23 PM

Wheel pics:

$525 with the tires.

Thanks for looking...

motorhead · 06-04-2008, 10:38 AM

DS Inner Fender & Wheels pending sale.

Come on people... I need this stuff GONE!

motorhead · 06-10-2008, 10:33 AM

Wheels SOLD! Thanks, Blake it was nice meeting you and Fiona.

The inner fender is still pending sale due to my busy schedule.

Come get the rest of it!

1987ttype · 06-10-2008, 04:28 PM

Thx Mike,
It was also great meeting you & Natasha. Wish I could have stayed longer and picked your brain some more but had to get moving.

Maybe next time when I get one of your scan tools.

Thanks again for the wheels.

Blake

motorhead · 06-10-2008, 07:08 PM

MAFs now pending sale.

Don't make me eBay this stuff...

gbsean · 06-10-2008, 09:28 PM

post it on the sale section.....sold mine real quick

motorhead · 06-10-2008, 09:33 PM

Quote:

Originally Posted by gbsean

post it on the sale section.....sold mine real quick

Americans hate buying out of Canada. I think they are still a little butt-hurt over the dollars being equal?

xpander343 · 06-11-2008, 10:27 PM

thanks for the parts mike, and it was good to meet you.

motorhead · 06-12-2008, 10:22 AM

Quote:

Originally Posted by xpander343

thanks for the parts mike, and it was good to meet you.

You too, Steve.

With that said the MAFs are sold.

Blake and Steve need to buy my scan tools. ;)

motorhead · 07-07-2008, 03:31 PM

Complete TurboLink v3.0x w/Boost Sensing Harness (you will need to buy a GM 3 bar MAP) - $145

Complete Direct Scan v1.52 - $110

motorhead · 08-07-2008, 04:27 PM

A wide assortment of chips:
Two 83pph Siemens Low-Z - TurboTweak 100 octane - $60ea
Two 36pph Blue Tops - Jay Carter 94 & 100 octane - $30ea
Two+ Stock injectors - Thrasher 92 & Factory - $30ea

Direct Scan v1.52 - $95
TurboLink v3.0 w/ Boost Sensing Harness - $120

Just a Six?? · 08-07-2008, 04:52 PM

I cant believe the Stock Mafs hung around that long with 3 for a $100!!
I should have got them! Always people want em, need em! $$$ in the Bank!!

06-02-2008, 04:24 PM	#1 (permalink)
motorhead aka: mOtOrHeAd MiKe Join Date: Jan 2002 Location: Orangeville, Ontario Canada Posts: 4,496	Garage Sale. A wide assortment of chips: Two 83pph Siemens Low-Z - TurboTweak 100 octane - $60ea Two 36pph Blue Tops - Jay Carter 94 & 100 octane - $30ea Two+ Stock injectors - Thrasher 92 & Factory - $30ea DS Inner fender - It is plastic and not cut up - $50 Set of 86-87 T-type wheels (2 centre caps) - Nice condition for daily use or... - $300 3 x GM MAFs - Current condition is unknown (other than in a box). I drove my car on them, went low 12s, and boxed them up for MAFT Pro - $100 for all three. Complete TurboLink v3.0x w/ Boost Sensing Harness (you will need to buy a GM 3 bar MAP) - $175 -> Comes with v2.0x as well, original user manual and other stuff. Complete Direct Scan v1.52 - $140 -> Comes with original box, 3.5" diskette is long gone; the software is available here: DirectScan News I have a bunch of maroon t-top interior parts from an 86 T-type as well... Pics are available upon request. email: michael_lis@whitetrashdesign.ca or call me in the evenings at 289-298-5185 __________________ [1987 Monte Carlo Super Slow\|1991 Z28 Slothmaro\|2002 B4C Crapmaro\|2007 TrailBlazer AWD Super ] [1987 Turtle Buick] High-Mileage 3.8L (Stock), MAFT Pro, Caspers PnP Harness, Extender Pro, LC-1, PowerLogger, PowerPlate, Garrett T63e, Low-Z 83s, Modified International Semi FMIC, MPE 3" DP, 4" Single Exhaust w/Magnaflow, Dual In-tank Pumps, ProPain Injection, Built 200-4R w/3000 Stall, 8.5" w/Welded Axle Tubes & 3.08s, Tubular UCAs & Boxed LCAs F&R, 36mm 1LE & F41 Swaybars, KYBs, 800lb/in & 200lb/in Springs, Ronal R15 17x9.5s w/275/40s & 325/45 M&H Drag Radials & an HKS Turbo Timer... Just scratching the surface. I Brake For ZR1s Parts For Sale!

06-02-2008, 08:08 PM	#3 (permalink)
NO1B4ME Registered User Join Date: Mar 2005 Location: AREA 51 Posts: 221	DS Inner Fender Hi Mike.... Sent you a PM on the DS inner fender. Thanks Rob __________________ Addicted To Black Krack Rob

06-03-2008, 08:23 PM	#4 (permalink)
motorhead aka: mOtOrHeAd MiKe Join Date: Jan 2002 Location: Orangeville, Ontario Canada Posts: 4,496	Wheel pics: $525 with the tires. Thanks for looking... __________________ [1987 Monte Carlo Super Slow\|1991 Z28 Slothmaro\|2002 B4C Crapmaro\|2007 TrailBlazer AWD Super ] [1987 Turtle Buick] High-Mileage 3.8L (Stock), MAFT Pro, Caspers PnP Harness, Extender Pro, LC-1, PowerLogger, PowerPlate, Garrett T63e, Low-Z 83s, Modified International Semi FMIC, MPE 3" DP, 4" Single Exhaust w/Magnaflow, Dual In-tank Pumps, ProPain Injection, Built 200-4R w/3000 Stall, 8.5" w/Welded Axle Tubes & 3.08s, Tubular UCAs & Boxed LCAs F&R, 36mm 1LE & F41 Swaybars, KYBs, 800lb/in & 200lb/in Springs, Ronal R15 17x9.5s w/275/40s & 325/45 M&H Drag Radials & an HKS Turbo Timer... Just scratching the surface. I Brake For ZR1s Parts For Sale!

06-04-2008, 10:38 AM	#5 (permalink)
motorhead aka: mOtOrHeAd MiKe Join Date: Jan 2002 Location: Orangeville, Ontario Canada Posts: 4,496	DS Inner Fender & Wheels pending sale. Come on people... I need this stuff GONE! __________________ [1987 Monte Carlo Super Slow\|1991 Z28 Slothmaro\|2002 B4C Crapmaro\|2007 TrailBlazer AWD Super ] [1987 Turtle Buick] High-Mileage 3.8L (Stock), MAFT Pro, Caspers PnP Harness, Extender Pro, LC-1, PowerLogger, PowerPlate, Garrett T63e, Low-Z 83s, Modified International Semi FMIC, MPE 3" DP, 4" Single Exhaust w/Magnaflow, Dual In-tank Pumps, ProPain Injection, Built 200-4R w/3000 Stall, 8.5" w/Welded Axle Tubes & 3.08s, Tubular UCAs & Boxed LCAs F&R, 36mm 1LE & F41 Swaybars, KYBs, 800lb/in & 200lb/in Springs, Ronal R15 17x9.5s w/275/40s & 325/45 M&H Drag Radials & an HKS Turbo Timer... Just scratching the surface. I Brake For ZR1s Parts For Sale!

06-10-2008, 10:33 AM	#6 (permalink)
motorhead aka: mOtOrHeAd MiKe Join Date: Jan 2002 Location: Orangeville, Ontario Canada Posts: 4,496	Wheels SOLD! Thanks, Blake it was nice meeting you and Fiona. The inner fender is still pending sale due to my busy schedule. Come get the rest of it! __________________ [1987 Monte Carlo Super Slow\|1991 Z28 Slothmaro\|2002 B4C Crapmaro\|2007 TrailBlazer AWD Super ] [1987 Turtle Buick] High-Mileage 3.8L (Stock), MAFT Pro, Caspers PnP Harness, Extender Pro, LC-1, PowerLogger, PowerPlate, Garrett T63e, Low-Z 83s, Modified International Semi FMIC, MPE 3" DP, 4" Single Exhaust w/Magnaflow, Dual In-tank Pumps, ProPain Injection, Built 200-4R w/3000 Stall, 8.5" w/Welded Axle Tubes & 3.08s, Tubular UCAs & Boxed LCAs F&R, 36mm 1LE & F41 Swaybars, KYBs, 800lb/in & 200lb/in Springs, Ronal R15 17x9.5s w/275/40s & 325/45 M&H Drag Radials & an HKS Turbo Timer... Just scratching the surface. I Brake For ZR1s Parts For Sale!

06-02-2008, 05:31 PM	#2 (permalink)
1987ttype Registered Abuser Join Date: Mar 2007 Location: Toronto Posts: 13	PM sent re: t-type wheels. Cheers

06-10-2008, 04:28 PM	#7 (permalink)
1987ttype Registered Abuser Join Date: Mar 2007 Location: Toronto Posts: 13	Thx Mike, It was also great meeting you & Natasha. Wish I could have stayed longer and picked your brain some more but had to get moving. Maybe next time when I get one of your scan tools. Thanks again for the wheels. Blake

06-10-2008, 07:08 PM	#8 (permalink)
motorhead aka: mOtOrHeAd MiKe Join Date: Jan 2002 Location: Orangeville, Ontario Canada Posts: 4,496	MAFs now pending sale. Don't make me eBay this stuff... __________________ [1987 Monte Carlo Super Slow\|1991 Z28 Slothmaro\|2002 B4C Crapmaro\|2007 TrailBlazer AWD Super ] [1987 Turtle Buick] High-Mileage 3.8L (Stock), MAFT Pro, Caspers PnP Harness, Extender Pro, LC-1, PowerLogger, PowerPlate, Garrett T63e, Low-Z 83s, Modified International Semi FMIC, MPE 3" DP, 4" Single Exhaust w/Magnaflow, Dual In-tank Pumps, ProPain Injection, Built 200-4R w/3000 Stall, 8.5" w/Welded Axle Tubes & 3.08s, Tubular UCAs & Boxed LCAs F&R, 36mm 1LE & F41 Swaybars, KYBs, 800lb/in & 200lb/in Springs, Ronal R15 17x9.5s w/275/40s & 325/45 M&H Drag Radials & an HKS Turbo Timer... Just scratching the surface. I Brake For ZR1s Parts For Sale!

06-10-2008, 09:28 PM	#9 (permalink)
gbsean U.S. Citizen Join Date: Jul 2005 Location: Flanders, N.J. Posts: 9,829	post it on the sale section.....sold mine real quick __________________ Best ET to date 11.769 @ 116.51 mph Best MPH to date 11.846 @ 118.68 eat that Ferret Joe Tuning in Progress Sean Ryder Buick Performance Group Vice-Chairman www.buickperformancegroup.com see thread for Engine Specs http://www.turbobuicks.com/forums/wa...tml#post680751 happy now Rich

06-11-2008, 10:27 PM	#11 (permalink)
xpander343 Poor and stupid Join Date: Jun 2006 Location: Barrie, Ontario Posts: 150	thanks for the parts mike, and it was good to meet you. __________________ Steve 87 Limited with T-tops and W02 Hooker cat back exhaust, Turbo tweak chip, accufab fpr. In a box in the trunk: Hotwire kit, walboro 340, alky kit, rjc powerplate, duttweiler neck. 87 Turbo T with W02: revived!

07-07-2008, 03:31 PM	#13 (permalink)
motorhead aka: mOtOrHeAd MiKe Join Date: Jan 2002 Location: Orangeville, Ontario Canada Posts: 4,496	Complete TurboLink v3.0x w/Boost Sensing Harness (you will need to buy a GM 3 bar MAP) - $145 Complete Direct Scan v1.52 - $110 __________________ [1987 Monte Carlo Super Slow\|1991 Z28 Slothmaro\|2002 B4C Crapmaro\|2007 TrailBlazer AWD Super ] [1987 Turtle Buick] High-Mileage 3.8L (Stock), MAFT Pro, Caspers PnP Harness, Extender Pro, LC-1, PowerLogger, PowerPlate, Garrett T63e, Low-Z 83s, Modified International Semi FMIC, MPE 3" DP, 4" Single Exhaust w/Magnaflow, Dual In-tank Pumps, ProPain Injection, Built 200-4R w/3000 Stall, 8.5" w/Welded Axle Tubes & 3.08s, Tubular UCAs & Boxed LCAs F&R, 36mm 1LE & F41 Swaybars, KYBs, 800lb/in & 200lb/in Springs, Ronal R15 17x9.5s w/275/40s & 325/45 M&H Drag Radials & an HKS Turbo Timer... Just scratching the surface. I Brake For ZR1s Parts For Sale!

08-07-2008, 04:27 PM	#14 (permalink)
motorhead aka: mOtOrHeAd MiKe Join Date: Jan 2002 Location: Orangeville, Ontario Canada Posts: 4,496	A wide assortment of chips: Two 83pph Siemens Low-Z - TurboTweak 100 octane - $60ea Two 36pph Blue Tops - Jay Carter 94 & 100 octane - $30ea Two+ Stock injectors - Thrasher 92 & Factory - $30ea Direct Scan v1.52 - $95 TurboLink v3.0 w/ Boost Sensing Harness - $120 __________________ [1987 Monte Carlo Super Slow\|1991 Z28 Slothmaro\|2002 B4C Crapmaro\|2007 TrailBlazer AWD Super ] [1987 Turtle Buick] High-Mileage 3.8L (Stock), MAFT Pro, Caspers PnP Harness, Extender Pro, LC-1, PowerLogger, PowerPlate, Garrett T63e, Low-Z 83s, Modified International Semi FMIC, MPE 3" DP, 4" Single Exhaust w/Magnaflow, Dual In-tank Pumps, ProPain Injection, Built 200-4R w/3000 Stall, 8.5" w/Welded Axle Tubes & 3.08s, Tubular UCAs & Boxed LCAs F&R, 36mm 1LE & F41 Swaybars, KYBs, 800lb/in & 200lb/in Springs, Ronal R15 17x9.5s w/275/40s & 325/45 M&H Drag Radials & an HKS Turbo Timer... Just scratching the surface. I Brake For ZR1s Parts For Sale! Last edited by motorhead : 08-07-2008 at 05:00 PM.

08-07-2008, 04:52 PM	#15 (permalink)
Just a Six?? Norb's Creation is Here!! Join Date: May 2003 Location: Toronto Posts: 10,248	I cant believe the Stock Mafs hung around that long with 3 for a $100!! I should have got them! Always people want em, need em! $$$ in the Bank!! __________________ 87 LTD. Purchased May 88 Doeskin leather, coach lites, moonroof & carpeted trunk. No Factory Hood Ornament! Special order by the VP of GM Canada! Not another like it! Lots of Go Fast goodies! 11.5 is as Fast as I go! Thats what the track told me! It's a Small World, but I wouldn't want to Paint It!! PS: My name is David & I have One screen name everywhere!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CONLEY'S Garage Sale Saturday 9/29/2007	BAGN	Deep South Buick Club	0	09-26-2007 09:50 PM
Lil garage sale	Dragula GN	Parts For Sale	2	07-03-2007 12:25 PM
Rich's Auto Garage Sale	Buicksx2	Parts For Sale	20	11-10-2004 07:14 PM
Best garage sale around!!!	Nas-T-V6	Buick Racers in Toronto and Surrounding Areas	7	06-27-2003 08:54 PM
Parts for sale! garage sale!	Spoolin Around	Buick Racers in Toronto and Surrounding Areas	0	05-28-2002 09:05 PM