Custom made aluminum pulleys

SPEEDSTREAM69 · 07-10-2006, 11:51 AM

Hello Buick owners

I have a friend who own's a machine shop Located in the Gta and I was Just woundering how may of you would be interested in custom made billet aluminum pulleys for Buicks, Camaro's, Mustangs etc.
I just had a set made for my 87 Buick Gn and will be posting pictures, just to note I am not looking to steal Rjc work just looking to help out local car people and my friend with his business.
If I recieve bulk orders I can get price reduction
Also any type of custom work can be done just send me your request.

Thanks

Just a Six?? · 07-10-2006, 03:14 PM

Show some pics! Local competition to the US boys is a good thing! Why not have stuff done local without shipping etc?

richie6 · 07-10-2006, 03:34 PM

how much for a set? water pump, alt and fan?

SPEEDSTREAM69 · 07-10-2006, 05:27 PM

I can have a complete set done for around $400 cnd
it all depends on the detail requested
examples are:
Different types of finishes (anodized in red, black, or blue, high polish, satan finish) etc..
also what type of detail people want on the facing. Keep in mined I am open to any types of requests valve covers, plenums,spacers,upper and lower rear control arms,dash plates,console plates,horn buttons,ac and alternator bracket etc...

I tried posting the pictures but the file is to large until I get this sorted out I will email to anyone interested

thanks again

SPEEDSTREAM69 · 07-10-2006, 06:50 PM

set includes
- alternator
- power steering
- tensioner
- water pump
- crank

under drive or stock diameter

RogueVette · 07-10-2006, 10:15 PM

Would your guy make a 6" crank pulley? How much would he want for it?
Thanks

BigMike · 07-11-2006, 07:20 AM

Quote:

Originally Posted by RogueVette

Would your guy make a 6" crank pulley? How much would he want for it?
Thanks

Make that two.

ttypewhite · 07-11-2006, 08:00 AM

Can he also do a cog pulley for a Mustang with a J-trim Mondo blower? I believe its a 8.5" crank pulley that we are looking for. Price????

SPEEDSTREAM69 · 07-11-2006, 08:23 AM

You can veiw picture of pulley's on the posting picture thread

I will provide pricing ASAP

Thanks

SPEEDSTREAM69 · 07-14-2006, 04:30 PM

Hello,

Sorry for the delay in response, he can have a complete set made with a 6"
diameter crank pulley for $400 cdn.
Set includes
Crank $130
water pump $90
tensioner $90
alternator $50
power steering $90

Note if 5 people order I can get reduced pricing

Thanks

Just a Six?? · 07-14-2006, 05:47 PM

Quote:

Originally Posted by RogueVette

Would your guy make a 6" crank pulley? How much would he want for it?
Thanks

Whats the 6" crank pulley, bigger or smaller than stock? Mine is undersize & guessing would be a 6" but not sure?

BigMike · 07-14-2006, 06:06 PM

6 Inch is for electric water pump.

norbs · 07-14-2006, 10:58 PM

Just remember the stock diameter tensioner pulley won;t work with the electric water pump. THis is why i requested a smaller tensioner pulley. I will get the size thatis required to be made.

norbs · 07-15-2006, 05:05 PM

Looks like we need 3 1/8" diameter for tensisoner pulley with no lips on the outside just flat surface as they could cut the upper rad hose. Please give pricing on the single pulley also.

thanks

Black bitch · 07-16-2006, 09:16 AM

Count me in on a stock set ( polished)

Geo.

07-10-2006, 11:51 AM	#1 (permalink)
SPEEDSTREAM69 Registered User Join Date: Jul 2004 Location: BRAMPTON ONT Posts: 26	Custom made aluminum pulleys Hello Buick owners I have a friend who own's a machine shop Located in the Gta and I was Just woundering how may of you would be interested in custom made billet aluminum pulleys for Buicks, Camaro's, Mustangs etc. I just had a set made for my 87 Buick Gn and will be posting pictures, just to note I am not looking to steal Rjc work just looking to help out local car people and my friend with his business. If I recieve bulk orders I can get price reduction Also any type of custom work can be done just send me your request. Thanks

07-10-2006, 03:14 PM	#2 (permalink)
Just a Six?? Beachbum Lives Here!! Join Date: May 2003 Location: Toronto Posts: 9,770	Show some pics! Local competition to the US boys is a good thing! Why not have stuff done local without shipping etc? __________________ 87 LTD. Purchased May 88 Doeskin leather, coach lites, moonroof & carpeted trunk. No Factory Hood Ornament! Special order by the VP of GM Canada! Not another like it! Lots of Go Fast goodies! 11.5 is as Fast as I go! Thats what the track told me! It's a Small World, but I wouldn't want to Paint It!!

07-11-2006, 08:00 AM	#8 (permalink)
ttypewhite Registered User Join Date: Feb 2004 Location: T-Dot Posts: 811	Can he also do a cog pulley for a Mustang with a J-trim Mondo blower? I believe its a 8.5" crank pulley that we are looking for. Price???? __________________ **NOVELLUS GRAPHICS RESOURCES FOR YOUR PRINT, PREPRESS AND CREATIVE NEEDS** www.novellusgraphics.com 9.94@ 135mph with a 1.37 sixty foot with lasts year setup. New 2008 setup is alive and running http://videos.streetfire.net/video/e...56017164c6.htm www.anderson-performance.com 410-282-9335 DLS Engine Development 886 E 900 N Wheatfield IN 46392 219-956-3653

07-11-2006, 08:23 AM	#9 (permalink)
SPEEDSTREAM69 Registered User Join Date: Jul 2004 Location: BRAMPTON ONT Posts: 26	pictures You can veiw picture of pulley's on the posting picture thread I will provide pricing ASAP Thanks

07-14-2006, 04:30 PM	#10 (permalink)
SPEEDSTREAM69 Registered User Join Date: Jul 2004 Location: BRAMPTON ONT Posts: 26	price Hello, Sorry for the delay in response, he can have a complete set made with a 6" diameter crank pulley for $400 cdn. Set includes Crank $130 water pump $90 tensioner $90 alternator $50 power steering $90 Note if 5 people order I can get reduced pricing Thanks

07-10-2006, 03:34 PM	#3 (permalink)
richie6 Irish Mick Join Date: Aug 2002 Location: Nanaimo B.C. Posts: 1,252	how much for a set? water pump, alt and fan?

07-10-2006, 05:27 PM	#4 (permalink)
SPEEDSTREAM69 Registered User Join Date: Jul 2004 Location: BRAMPTON ONT Posts: 26	I can have a complete set done for around $400 cnd it all depends on the detail requested examples are: Different types of finishes (anodized in red, black, or blue, high polish, satan finish) etc.. also what type of detail people want on the facing. Keep in mined I am open to any types of requests valve covers, plenums,spacers,upper and lower rear control arms,dash plates,console plates,horn buttons,ac and alternator bracket etc... I tried posting the pictures but the file is to large until I get this sorted out I will email to anyone interested thanks again

07-10-2006, 06:50 PM	#5 (permalink)
SPEEDSTREAM69 Registered User Join Date: Jul 2004 Location: BRAMPTON ONT Posts: 26	set includes - alternator - power steering - tensioner - water pump - crank under drive or stock diameter

07-10-2006, 10:15 PM	#6 (permalink)
RogueVette Registered User Join Date: Sep 2000 Posts: 150	Would your guy make a 6" crank pulley? How much would he want for it? Thanks

07-14-2006, 06:06 PM	#12 (permalink)
BigMike Don't Piss Me Off Join Date: May 2002 Location: Ont. Canada Posts: 1,693	6 Inch is for electric water pump.

07-14-2006, 10:58 PM	#13 (permalink)
norbs Dr.Voodoo Join Date: Sep 2000 Location: toronto Posts: 2,090	Just remember the stock diameter tensioner pulley won;t work with the electric water pump. THis is why i requested a smaller tensioner pulley. I will get the size thatis required to be made. __________________ 670 ft of torque is it BS? I can;t even spin the tires! Looking for a BB 76 turbo soon.. out of fuel pump and spark , cant race until new dyno numbers of at least 750 rwhp. Quick facts: Every 10 f increase in intake temperature increases the octane requirement by .5 of point. Every 11 f degree in inlet temperature decrease increases air density and hp 1% Narrow band factory o2 sensors are useless for power tuning as they read diffrent at different EGTS and boost levels[/b] From 160 to 180 f coolant temp the octane requirement goes up 2 numbers. Individual cyl fuel, timing tuning can increase hp between 30-40 on a 6 cyl engine. beachbum should not be allowed to have tools in his hands other than a hammer.

07-15-2006, 05:05 PM	#14 (permalink)
norbs Dr.Voodoo Join Date: Sep 2000 Location: toronto Posts: 2,090	Looks like we need 3 1/8" diameter for tensisoner pulley with no lips on the outside just flat surface as they could cut the upper rad hose. Please give pricing on the single pulley also. thanks __________________ 670 ft of torque is it BS? I can;t even spin the tires! Looking for a BB 76 turbo soon.. out of fuel pump and spark , cant race until new dyno numbers of at least 750 rwhp. Quick facts: Every 10 f increase in intake temperature increases the octane requirement by .5 of point. Every 11 f degree in inlet temperature decrease increases air density and hp 1% Narrow band factory o2 sensors are useless for power tuning as they read diffrent at different EGTS and boost levels[/b] From 160 to 180 f coolant temp the octane requirement goes up 2 numbers. Individual cyl fuel, timing tuning can increase hp between 30-40 on a 6 cyl engine. beachbum should not be allowed to have tools in his hands other than a hammer.

07-16-2006, 09:16 AM	#15 (permalink)
Black bitch Registered User Join Date: Oct 2002 Location: Iasalle Ontario Canada Posts: 53	Pulleys Count me in on a stock set ( polished) Geo. __________________ Geo. 87 GN Best#11.1 @ 122mph 1.5 60ft.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode