hot parts deal

278cikiller · 08-13-2004, 11:27 PM

f.s. ecm with driver's for 55lb-72-83 lb injectors red armstrongs 55lb chip's race and street and 55lb injectors a steal at $450.00 . also re condition valve covers right paint color 75.00 exchange dog house the same thing as covers will install .rebuilt alternater $140.00 .from TURBO BUICK RACEING & AUTO GLASS & TRIM call 416-856-4527.

dandman · 08-14-2004, 07:19 AM

hi
do you sell other parts, im looking for a front mount intercooler for my 87 gn, maybe a precision
thanks..dan

norbs · 08-14-2004, 08:52 AM

How much to remove and reinstall a tranny?

278cikiller · 08-14-2004, 03:06 PM

call me on the trans. job 250.00 re&re 416-856-4527.

Just a Six?? · 08-15-2004, 11:44 AM

Where is the shop located?

qwk_6ix · 08-15-2004, 11:55 AM

do u do tranny's for other cars as well ? My old caddy has been sitting on the driveway for a while now and all it needs is a the fresh tranny to be put in but most shops out there have been asking too much in comparison to what the car is worth seeing as its just the winter beater.

278cikiller · 08-15-2004, 03:28 PM

just a six shop location bowmanville past oshawa call me 416-856-4527 dan talk to ya soon.

278cikiller · 08-15-2004, 03:32 PM

quk-6ix I only do rear wheel drive cars .

qwk_6ix · 08-15-2004, 04:10 PM

figured as much, thnx for the qwik response.

08-13-2004, 11:27 PM	#1 (permalink)
278cikiller Registered User Join Date: Aug 2004 Location: Bowmanville Posts: 1,071	hot parts deal f.s. ecm with driver's for 55lb-72-83 lb injectors red armstrongs 55lb chip's race and street and 55lb injectors a steal at $450.00 . also re condition valve covers right paint color 75.00 exchange dog house the same thing as covers will install .rebuilt alternater $140.00 .from TURBO BUICK RACEING & AUTO GLASS & TRIM call 416-856-4527. __________________ 1987 BUICK REGAL SLEEPER 274-done 45 over stage II motor, # 153 BLOCK , 212 ,206 roller cam, Preission Front mount intercooler, 83lb injectors,stock ECM with Drivers,-RJC-4" crome pipe,-3-1/2" LS-1 MASS AIR, Preission 70MM Dog House and power plate, 70mm Accufab Throttle Body, Quad air, Double Fuel Pump, G&N-1 Alum Heads, 1.65 T&D Roller Rockers, NEW SET OF STAINLESS STEEL ATR HEADERS FOUR BOLT,WITH MARK II RACE GATE, SMC Alcohol injection system, John Craig LImted Enginering Big Shaft 76 Turbo with .81 EXCH Housing 3" mandrel bent exhaust front to back, Raised runners on intake & 1" inch spacer, Power plate, FORD 9" REAR END WITH 390 GEARS WITH 33 SPLINE AXELS:AIR BAGS AND DRAG SHOCKS. NATIONAL RACING:6 24/7 SERVICE.:905-213-2871 or 905-419-0704 Home of Durhams Fastest Turbo Buicks: I DO WORK ON GRAND NATIONALS,AND T-TYPES & GNX. 22 YEARS ON THESE CARS. I DO SAND BLASTING NOW! ERICS TURBO TWEEK CHIP. I DO HAVE A CAR TRAILER AND TRUCK FOR FLOAT SERVICE.

08-14-2004, 03:06 PM	#4 (permalink)
278cikiller Registered User Join Date: Aug 2004 Location: Bowmanville Posts: 1,071	norb call me on the trans. job 250.00 re&re 416-856-4527. __________________ 1987 BUICK REGAL SLEEPER 274-done 45 over stage II motor, # 153 BLOCK , 212 ,206 roller cam, Preission Front mount intercooler, 83lb injectors,stock ECM with Drivers,-RJC-4" crome pipe,-3-1/2" LS-1 MASS AIR, Preission 70MM Dog House and power plate, 70mm Accufab Throttle Body, Quad air, Double Fuel Pump, G&N-1 Alum Heads, 1.65 T&D Roller Rockers, NEW SET OF STAINLESS STEEL ATR HEADERS FOUR BOLT,WITH MARK II RACE GATE, SMC Alcohol injection system, John Craig LImted Enginering Big Shaft 76 Turbo with .81 EXCH Housing 3" mandrel bent exhaust front to back, Raised runners on intake & 1" inch spacer, Power plate, FORD 9" REAR END WITH 390 GEARS WITH 33 SPLINE AXELS:AIR BAGS AND DRAG SHOCKS. NATIONAL RACING:6 24/7 SERVICE.:905-213-2871 or 905-419-0704 Home of Durhams Fastest Turbo Buicks: I DO WORK ON GRAND NATIONALS,AND T-TYPES & GNX. 22 YEARS ON THESE CARS. I DO SAND BLASTING NOW! ERICS TURBO TWEEK CHIP. I DO HAVE A CAR TRAILER AND TRUCK FOR FLOAT SERVICE.

08-15-2004, 11:44 AM	#5 (permalink)
Just a Six?? OK! Who Farted Again?? Join Date: May 2003 Location: Toronto Posts: 15,031	Where is the shop located? __________________ 87 LTD. Purchased May 88 Doeskin leather, coach lites, moonroof & carpeted trunk. No Factory Hood Ornament! The sticker on AC shows a V-8 Carb car!! Plus a Funky Windshield! Special order by the VP of GM Canada! Not another like it! Lots of Go Fast goodies! 11.5 is as Fast as I go! Thats what the track told me! It's a Small World, but I wouldn't want to Paint It!! BPG Member #2040

08-15-2004, 11:55 AM	#6 (permalink)
qwk_6ix Running from Jonny Law Join Date: Aug 2003 Location: Newmarket, Ontario Posts: 704	do u do tranny's for other cars as well ? My old caddy has been sitting on the driveway for a while now and all it needs is a the fresh tranny to be put in but most shops out there have been asking too much in comparison to what the car is worth seeing as its just the winter beater. __________________ 1987 GN - 009's 42.5LBS Injectors, TE-44 Turbo, Hemco Plenum, Walbro 340 (Hot wired), Hooker Down pipe, Auburn Rear, 2-3/4" Flowmaster Exhaust, Line Lock, Scanmaster 2.1, Airbags, Weld Pro Stars w/traction-less 255/60/R15 tires, Antenna Delete, Freshly Rebuilt Trans (2008) Best ET: 12.64 @ 106.79mph w/1.948 60' - 20psi and 94 Octane You can find me running Dragnostic tests at TMP ______________ Cayuga Nov '08 - 18psi 12.8@105

08-15-2004, 03:28 PM	#7 (permalink)
278cikiller Registered User Join Date: Aug 2004 Location: Bowmanville Posts: 1,071	shop location just a six shop location bowmanville past oshawa call me 416-856-4527 dan talk to ya soon. __________________ 1987 BUICK REGAL SLEEPER 274-done 45 over stage II motor, # 153 BLOCK , 212 ,206 roller cam, Preission Front mount intercooler, 83lb injectors,stock ECM with Drivers,-RJC-4" crome pipe,-3-1/2" LS-1 MASS AIR, Preission 70MM Dog House and power plate, 70mm Accufab Throttle Body, Quad air, Double Fuel Pump, G&N-1 Alum Heads, 1.65 T&D Roller Rockers, NEW SET OF STAINLESS STEEL ATR HEADERS FOUR BOLT,WITH MARK II RACE GATE, SMC Alcohol injection system, John Craig LImted Enginering Big Shaft 76 Turbo with .81 EXCH Housing 3" mandrel bent exhaust front to back, Raised runners on intake & 1" inch spacer, Power plate, FORD 9" REAR END WITH 390 GEARS WITH 33 SPLINE AXELS:AIR BAGS AND DRAG SHOCKS. NATIONAL RACING:6 24/7 SERVICE.:905-213-2871 or 905-419-0704 Home of Durhams Fastest Turbo Buicks: I DO WORK ON GRAND NATIONALS,AND T-TYPES & GNX. 22 YEARS ON THESE CARS. I DO SAND BLASTING NOW! ERICS TURBO TWEEK CHIP. I DO HAVE A CAR TRAILER AND TRUCK FOR FLOAT SERVICE.

08-14-2004, 07:19 AM	#2 (permalink)
dandman Registered User Join Date: Feb 2004 Location: mississauga, ontario, canada Posts: 494	hi do you sell other parts, im looking for a front mount intercooler for my 87 gn, maybe a precision thanks..dan

08-14-2004, 08:52 AM	#3 (permalink)
norbs fantasy tuner/investor Join Date: Sep 2000 Location: toronto Posts: 3,270	How much to remove and reinstall a tranny?

08-15-2004, 03:32 PM	#8 (permalink)
278cikiller Registered User Join Date: Aug 2004 Location: Bowmanville Posts: 1,071	transmission quk-6ix I only do rear wheel drive cars . __________________ 1987 BUICK REGAL SLEEPER 274-done 45 over stage II motor, # 153 BLOCK , 212 ,206 roller cam, Preission Front mount intercooler, 83lb injectors,stock ECM with Drivers,-RJC-4" crome pipe,-3-1/2" LS-1 MASS AIR, Preission 70MM Dog House and power plate, 70mm Accufab Throttle Body, Quad air, Double Fuel Pump, G&N-1 Alum Heads, 1.65 T&D Roller Rockers, NEW SET OF STAINLESS STEEL ATR HEADERS FOUR BOLT,WITH MARK II RACE GATE, SMC Alcohol injection system, John Craig LImted Enginering Big Shaft 76 Turbo with .81 EXCH Housing 3" mandrel bent exhaust front to back, Raised runners on intake & 1" inch spacer, Power plate, FORD 9" REAR END WITH 390 GEARS WITH 33 SPLINE AXELS:AIR BAGS AND DRAG SHOCKS. NATIONAL RACING:6 24/7 SERVICE.:905-213-2871 or 905-419-0704 Home of Durhams Fastest Turbo Buicks: I DO WORK ON GRAND NATIONALS,AND T-TYPES & GNX. 22 YEARS ON THESE CARS. I DO SAND BLASTING NOW! ERICS TURBO TWEEK CHIP. I DO HAVE A CAR TRAILER AND TRUCK FOR FLOAT SERVICE.

08-15-2004, 04:10 PM	#9 (permalink)
qwk_6ix Running from Jonny Law Join Date: Aug 2003 Location: Newmarket, Ontario Posts: 704	figured as much, thnx for the qwik response. __________________ 1987 GN - 009's 42.5LBS Injectors, TE-44 Turbo, Hemco Plenum, Walbro 340 (Hot wired), Hooker Down pipe, Auburn Rear, 2-3/4" Flowmaster Exhaust, Line Lock, Scanmaster 2.1, Airbags, Weld Pro Stars w/traction-less 255/60/R15 tires, Antenna Delete, Freshly Rebuilt Trans (2008) Best ET: 12.64 @ 106.79mph w/1.948 60' - 20psi and 94 Octane You can find me running Dragnostic tests at TMP ______________ Cayuga Nov '08 - 18psi 12.8@105

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode