BOP at Reyonds, GA Nov 5&6

Ttype83 · 09-16-2004, 09:44 PM

So who is planning on going??
I hope to be there this year and hoping to have the oldest T-type there running

Tony you going?????
Hoping to get the wife to run the Ram

I posted this in the Deep South forum but didn't want any one here to miss it

tony moore · 09-19-2004, 09:36 AM

I havent been working on my car my bottom end knock is back I have been working on the new engine slowly but surely but it wont be finished by then i may bring it like it is I dont need any parts from this engine anyway will you help me sweep up crank and rod pieces?

I didnt want to kill it in case a.t.r. called but I have pretty much gave up on them

my car might run 14s I figured out my 60ft problem remind me ahead of time maybe I can make it

Ttype83 · 09-19-2004, 11:46 AM

Hey Tony, Just bring what ever.
I can sweep, but you don't want to put a rod the the side

What's the serect for the 60' time....???

I vid my last trip to the track, couldn't drive around the water pit.
But I could see the front end wasn't lifting. I'm going to remove the front sway bar for the next trip and see if that helps.

tony moore · 09-19-2004, 09:48 PM

no big secret JIm my car has too much carb. when I went to the track I held the throttle down to build boost then I floored it (on slicks) it was slower to build boost than usual it was flooding out so boost lag was alot worse. on street tires you have to roll on it so boost comes up farly quick I think you could roll into it and it would be faster only one way to check that though

Ttype83 · 09-19-2004, 10:54 PM

I've done the rolling go on the 205/65/14's and pulled out some 2.3's . I got 2.3's to 2.4's spinning thru the 60' on the last trip, so I know I can bust in to the high 14's with traction. I have the carbed opened open and it's not over carbing yet with quick spool. I need to change plugs to 43T's instead of the 43TS's that I'm running, plus replace the Alt.... Those are going to wait acouple of weeks, just won 2 GN rims/tires on ebay for $81.59.. No the best looking, but good enfu for me

pontiacjeff · 11-01-2004, 10:09 PM

Damn, BOP at Reynolds or Super Heavy Shootout at Commerce?

I think BOP wins. It's gotta be cheaper, too. SHSO wants 55.00 for one day. How much and is there a web site to sign up?

Ttype83 · 11-01-2004, 10:19 PM

No sign up needed, $20 to race, $8 to watch per day
http://www.buickgsca.com/SEMCC.htm

Not sure if I can make it friday or not, just started my new job today. Should be there Saturday...got to reseal the uppipe before then

pontiacjeff · 11-02-2004, 12:09 AM

I'll be there with the turbo Suburban. At least Sat.

tony moore · 11-02-2004, 09:48 PM

doesnt look like I will make it

Ttype83 · 11-02-2004, 09:51 PM

Quote:

Originally posted by tony moore
doesnt look like I will make it

Dang it.. Well I wouldn't be running the Regal there

Lost the nose today to a S10..drove over the top

Ttype83 · 11-02-2004, 09:55 PM

What's left

pat83t · 11-02-2004, 10:55 PM

That sux big hurking nutz Jim. Sorry to hear about your crappy luck.

1983
Header Panel
Buick Regal GRY,10-82,AC K40053 $200 A and B Auto Salvage USA-GA(Griffin) E-mail 1-800-726-1570
1983
Header Panel
Buick Regal NO FILLERS 3L0099 $100 Lavonia Auto Salvage, Inc. USA-GA(Canon) E-mail 1-800-895-1492
1983
Header Panel
Buick Regal 2DR,1-83,RWD,LESS HEADLIGHT RINGS 8697 $75 Thompson's Auto and Truck Recycling USA-GA(Bowersville) E-mail 1-800-565-2610

All got from www.car-parts.com

pontiacjeff · 11-02-2004, 11:43 PM

Jim, that SUCKS! Must have been a dem trying to keep you from the polls? (ooh, sorry)

b4black · 11-03-2004, 07:30 AM

Sorry to see that Jim.

Hope you're OK. Let me know if there anything you need.

Ttype83 · 11-03-2004, 07:49 AM

I'm OK and so are the guys in the truck

Griffin is only 30 mintues from me

and I've talked to Mike McCoy..he has one as well.
I lost my hood emblem

I'll make a post later with more pics. The worst is the left frame where the bump bolts on. The rest is a pretty clean break.
Darn It....I know I was going to bust in to the 14's on this trip

...hmmm no nose...less weight..... to bad it wouldn't pass tech

LOL... Nope Jeff I vote GOP in CA...not that it helped there
Thanks Guys

Jim

09-16-2004, 09:44 PM	#1 (permalink)
Ttype83 Resident Slut Join Date: May 2001 Location: Newnan,Ga Posts: 5,295	BOP at Reyonds, GA Nov 5&6 So who is planning on going?? I hope to be there this year and hoping to have the oldest T-type there running Tony you going????? Hoping to get the wife to run the Ram I posted this in the Deep South forum but didn't want any one here to miss it __________________ Jim Seaton 83 T type Limited CarbedHotAir Slug ET 14.342 @ 94.67mph 14 psi boost, 2.080 60' Comp Cams will never get another dime of my money 86 White moon roof T-type, Stock IC & Turbo, Razor Alky, 50lb inj, Hotwire & fuel pump, tt chip, 2800 stall pats TC, R.Merritt plug wires & Trans, parts by Grumpy and his 3" single shot exhuast (No goals) Wifes toys:2004 Ram 1500 Quadcab Solar Yellow(HEMI) 2006 HD 1200C Sporty 1990 Camaro V6 (Daughter's beater) 1980 C3 Vette ...another project DSR member #6

09-19-2004, 09:36 AM	#2 (permalink)
tony moore old skool Join Date: Feb 2004 Location: South carolina Posts: 3,717	I havent been working on my car my bottom end knock is back I have been working on the new engine slowly but surely but it wont be finished by then i may bring it like it is I dont need any parts from this engine anyway will you help me sweep up crank and rod pieces? I didnt want to kill it in case a.t.r. called but I have pretty much gave up on them my car might run 14s I figured out my 60ft problem remind me ahead of time maybe I can make it __________________ 86 grand national 2nd owner t tops, digital dash and few other options. bone stock no mods(yet!!) brought back from the dead. new paint and interior 85 regal t type clone, blue in and out , carb. turbo stock engine , no ecm, msd btm,holley blue fuel pump, 650 holley double pump carb. 3.73 gear with mini spool,all the gauges, stock trans and conv. slow but fun!!

09-19-2004, 11:46 AM	#3 (permalink)
Ttype83 Resident Slut Join Date: May 2001 Location: Newnan,Ga Posts: 5,295	Hey Tony, Just bring what ever. I can sweep, but you don't want to put a rod the the side What's the serect for the 60' time....??? I vid my last trip to the track, couldn't drive around the water pit. But I could see the front end wasn't lifting. I'm going to remove the front sway bar for the next trip and see if that helps. __________________ Jim Seaton 83 T type Limited CarbedHotAir Slug ET 14.342 @ 94.67mph 14 psi boost, 2.080 60' Comp Cams will never get another dime of my money 86 White moon roof T-type, Stock IC & Turbo, Razor Alky, 50lb inj, Hotwire & fuel pump, tt chip, 2800 stall pats TC, R.Merritt plug wires & Trans, parts by Grumpy and his 3" single shot exhuast (No goals) Wifes toys:2004 Ram 1500 Quadcab Solar Yellow(HEMI) 2006 HD 1200C Sporty 1990 Camaro V6 (Daughter's beater) 1980 C3 Vette ...another project DSR member #6

09-19-2004, 09:48 PM	#4 (permalink)
tony moore old skool Join Date: Feb 2004 Location: South carolina Posts: 3,717	no big secret JIm my car has too much carb. when I went to the track I held the throttle down to build boost then I floored it (on slicks) it was slower to build boost than usual it was flooding out so boost lag was alot worse. on street tires you have to roll on it so boost comes up farly quick I think you could roll into it and it would be faster only one way to check that though __________________ 86 grand national 2nd owner t tops, digital dash and few other options. bone stock no mods(yet!!) brought back from the dead. new paint and interior 85 regal t type clone, blue in and out , carb. turbo stock engine , no ecm, msd btm,holley blue fuel pump, 650 holley double pump carb. 3.73 gear with mini spool,all the gauges, stock trans and conv. slow but fun!!

09-19-2004, 10:54 PM	#5 (permalink)
Ttype83 Resident Slut Join Date: May 2001 Location: Newnan,Ga Posts: 5,295	I've done the rolling go on the 205/65/14's and pulled out some 2.3's . I got 2.3's to 2.4's spinning thru the 60' on the last trip, so I know I can bust in to the high 14's with traction. I have the carbed opened open and it's not over carbing yet with quick spool. I need to change plugs to 43T's instead of the 43TS's that I'm running, plus replace the Alt.... Those are going to wait acouple of weeks, just won 2 GN rims/tires on ebay for $81.59.. No the best looking, but good enfu for me __________________ Jim Seaton 83 T type Limited CarbedHotAir Slug ET 14.342 @ 94.67mph 14 psi boost, 2.080 60' Comp Cams will never get another dime of my money 86 White moon roof T-type, Stock IC & Turbo, Razor Alky, 50lb inj, Hotwire & fuel pump, tt chip, 2800 stall pats TC, R.Merritt plug wires & Trans, parts by Grumpy and his 3" single shot exhuast (No goals) Wifes toys:2004 Ram 1500 Quadcab Solar Yellow(HEMI) 2006 HD 1200C Sporty 1990 Camaro V6 (Daughter's beater) 1980 C3 Vette ...another project DSR member #6

11-01-2004, 10:09 PM	#6 (permalink)
pontiacjeff Member Join Date: May 2004 Location: Atlanta, GA. USA Posts: 69	Damn, BOP at Reynolds or Super Heavy Shootout at Commerce? I think BOP wins. It's gotta be cheaper, too. SHSO wants 55.00 for one day. How much and is there a web site to sign up?

11-01-2004, 10:19 PM	#7 (permalink)
Ttype83 Resident Slut Join Date: May 2001 Location: Newnan,Ga Posts: 5,295	No sign up needed, $20 to race, $8 to watch per day http://www.buickgsca.com/SEMCC.htm Not sure if I can make it friday or not, just started my new job today. Should be there Saturday...got to reseal the uppipe before then __________________ Jim Seaton 83 T type Limited CarbedHotAir Slug ET 14.342 @ 94.67mph 14 psi boost, 2.080 60' Comp Cams will never get another dime of my money 86 White moon roof T-type, Stock IC & Turbo, Razor Alky, 50lb inj, Hotwire & fuel pump, tt chip, 2800 stall pats TC, R.Merritt plug wires & Trans, parts by Grumpy and his 3" single shot exhuast (No goals) Wifes toys:2004 Ram 1500 Quadcab Solar Yellow(HEMI) 2006 HD 1200C Sporty 1990 Camaro V6 (Daughter's beater) 1980 C3 Vette ...another project DSR member #6

11-02-2004, 12:09 AM	#8 (permalink)
pontiacjeff Member Join Date: May 2004 Location: Atlanta, GA. USA Posts: 69	I'll be there with the turbo Suburban. At least Sat.

11-02-2004, 09:48 PM	#9 (permalink)
tony moore old skool Join Date: Feb 2004 Location: South carolina Posts: 3,717	doesnt look like I will make it __________________ 86 grand national 2nd owner t tops, digital dash and few other options. bone stock no mods(yet!!) brought back from the dead. new paint and interior 85 regal t type clone, blue in and out , carb. turbo stock engine , no ecm, msd btm,holley blue fuel pump, 650 holley double pump carb. 3.73 gear with mini spool,all the gauges, stock trans and conv. slow but fun!!

11-02-2004, 09:55 PM	#11 (permalink)
Ttype83 Resident Slut Join Date: May 2001 Location: Newnan,Ga Posts: 5,295	What's left Attached Thumbnails __________________ Jim Seaton 83 T type Limited CarbedHotAir Slug ET 14.342 @ 94.67mph 14 psi boost, 2.080 60' Comp Cams will never get another dime of my money 86 White moon roof T-type, Stock IC & Turbo, Razor Alky, 50lb inj, Hotwire & fuel pump, tt chip, 2800 stall pats TC, R.Merritt plug wires & Trans, parts by Grumpy and his 3" single shot exhuast (No goals) Wifes toys:2004 Ram 1500 Quadcab Solar Yellow(HEMI) 2006 HD 1200C Sporty 1990 Camaro V6 (Daughter's beater) 1980 C3 Vette ...another project DSR member #6

11-02-2004, 10:55 PM	#12 (permalink)
pat83t NOW AVAILABLE ON DVD Join Date: Jan 2002 Location: Kelso Wa, USA Posts: 2,272	That sux big hurking nutz Jim. Sorry to hear about your crappy luck. 1983 Header Panel Buick Regal GRY,10-82,AC K40053 $200 A and B Auto Salvage USA-GA(Griffin) E-mail 1-800-726-1570 1983 Header Panel Buick Regal NO FILLERS 3L0099 $100 Lavonia Auto Salvage, Inc. USA-GA(Canon) E-mail 1-800-895-1492 1983 Header Panel Buick Regal 2DR,1-83,RWD,LESS HEADLIGHT RINGS 8697 $75 Thompson's Auto and Truck Recycling USA-GA(Bowersville) E-mail 1-800-565-2610 All got from www.car-parts.com __________________ 1984 Buick Electra Estate Wagon 1987 Honda Goldwing Aspencade Last edited by pat83t : 11-02-2004 at 10:59 PM.

11-02-2004, 11:43 PM	#13 (permalink)
pontiacjeff Member Join Date: May 2004 Location: Atlanta, GA. USA Posts: 69	Jim, that SUCKS! Must have been a dem trying to keep you from the polls? (ooh, sorry)

11-03-2004, 07:30 AM	#14 (permalink)
b4black Carb/Turbo Join Date: Sep 2000 Location: Chicagoland, IL Posts: 1,581	Sorry to see that Jim. Hope you're OK. Let me know if there anything you need. __________________ Rich George BEFORE BLACK Website 1983 Regal T TYPE 14.21 @ 93.75 mph - Have I caught the IC cars yet??? 1982 Regal GRAND NATIONAL 1998 Regal GS and 1996 Dodge Ram TurboDiesel too! Chicagoland Chapter GSCA

11-03-2004, 07:49 AM	#15 (permalink)
Ttype83 Resident Slut Join Date: May 2001 Location: Newnan,Ga Posts: 5,295	I'm OK and so are the guys in the truck Griffin is only 30 mintues from me and I've talked to Mike McCoy..he has one as well. I lost my hood emblem I'll make a post later with more pics. The worst is the left frame where the bump bolts on. The rest is a pretty clean break. Darn It....I know I was going to bust in to the 14's on this trip ...hmmm no nose...less weight..... to bad it wouldn't pass tech LOL... Nope Jeff I vote GOP in CA...not that it helped there Thanks Guys Jim __________________ Jim Seaton 83 T type Limited CarbedHotAir Slug ET 14.342 @ 94.67mph 14 psi boost, 2.080 60' Comp Cams will never get another dime of my money 86 White moon roof T-type, Stock IC & Turbo, Razor Alky, 50lb inj, Hotwire & fuel pump, tt chip, 2800 stall pats TC, R.Merritt plug wires & Trans, parts by Grumpy and his 3" single shot exhuast (No goals) Wifes toys:2004 Ram 1500 Quadcab Solar Yellow(HEMI) 2006 HD 1200C Sporty 1990 Camaro V6 (Daughter's beater) 1980 C3 Vette ...another project DSR member #6

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode