Prideful statement for Razor !!!

goneinsix · 11-08-2007, 10:13 PM

Well guy's, iv'e been playing around with my razor alky kit and all we have around here are 1/8 mile track's. I went a few weekend's ago with some buddy's to a track and ran a few passes just playing around and figured out i was gaining a FULL car length thru the 1/8 while spraying alky

, Pump gas and Razor alky kit's RULE!!!!!!!!

If i'm gaing a full car thru the 1/8 recon how much more that would be thru a 1/4? I did that on 22lbs of boost and 20deg of timing, I have since gone to 25lbs of boost and 22.9deg of timing with no knock and car feel's great.

Thank's again Julio for a great product!

turbo nasty · 11-09-2007, 07:50 AM

The best easiest way to unleash the power for sure

Grumpy · 11-09-2007, 07:51 AM

FLR · 11-09-2007, 11:30 AM

I went 12.39 on pump gas & Razor's alchy at Buick Day. That was on 20° of timing and throught the stock elbow, DP, and Hooker exhaust. That was also with the leaking, original injectors; and a NON-ALKY chip....

I've since got to 009s with a TT alchy chip, and a THDP. Also ported the comp. housing for more flow. Should run damn near 12.0/11.9 next week at Cecil. We'll see what happens.

forzfed · 11-12-2007, 12:28 PM

Alky rocks! I cranked the alky as high as it would go like Julio said and gained 3mph. On an unopen motor with a TE-44 and V4, I went 12.0@115.5mph with a 2.0 60ft on 18' of timing, through the stock exhaust system.

Reaper · 11-17-2007, 06:46 PM

can I get a link to the Razor site?

turboeric · 11-18-2007, 02:23 AM

WWW.ALKYCONTROL.COM

Turbosixx · 11-20-2007, 08:57 PM

I've been 11.80 @124 on razor's single nozzle. Best ET was an 11.06 on nitto's. I'd say it works. Stock shortblock, roller cam, champion heads and BB6776.

urntfstenuf · 11-29-2007, 09:15 AM

so what you guys are saying is turn the timng down on TT chip. so if my chip is 23/21 base, set the default's at lower #'s? example- if #'s are set at 128/128 go to 118/118.

11-08-2007, 10:13 PM	#1 (permalink)
goneinsix Registered User Join Date: Jan 2005 Location: pontotoc ms Posts: 68	Prideful statement for Razor !!! Well guy's, iv'e been playing around with my razor alky kit and all we have around here are 1/8 mile track's. I went a few weekend's ago with some buddy's to a track and ran a few passes just playing around and figured out i was gaining a FULL car length thru the 1/8 while spraying alky, Pump gas and Razor alky kit's RULE!!!!!!!! If i'm gaing a full car thru the 1/8 recon how much more that would be thru a 1/4? I did that on 22lbs of boost and 20deg of timing, I have since gone to 25lbs of boost and 22.9deg of timing with no knock and car feel's great. Thank's again Julio for a great product! __________________ 87 Regal Turbo Coupe with "T" Package (GN Interior @ Weld Wheel"s) Not stock but looks good with the gray car. Stock Heads, Stock Headers, Stock Turbo, Comp Cams BV69 260H Cam & Lifter Kit, 3" downpipe with 3" single exhaust, Caspers Thumbwheel Chip, Turbo Tweak program burnt to #7 setting, Razor Alky, Bradco 3400 Stall, 25lbs Boost, Straight Methanol In Alky Tank, 93 Octane, 42lb Injectors, NO KNOCK YET!! 1/8 ET 8.50

11-09-2007, 07:50 AM	#2 (permalink)
turbo nasty Boost Sux my Wallet Join Date: Aug 2003 Location: Mississippi Gulf Coast area Posts: 1,108	The best easiest way to unleash the power for sure __________________ 87 GN (3480lbs w/me & 1/2 tank) GT3255E, ESP FMIC, Razors Alky, Turbosaver, TA Headers, THDP w/test, ATR crossflow, TT, 38's, hopped up trans, Pats 10" 3k l/u, QA1r's, UMI Ups (adj) and lows, HR bar, MT DR's. 2003 G35 Coupe Blk on BLk, JDM Clears, 18's, Prem PKG, Lthr, Bose....wifes car 2005 Harleys : Wide Glide & Duece ...Mucho Bling

11-09-2007, 07:51 AM	#3 (permalink)
Grumpy Registered User Join Date: Sep 2000 Location: Andover, Ma Posts: 11,024	__________________ Dan dont run your mouth if you cant run your car 86/87 GN and 89 TTA .. tons of parts !! Time to get out! Stuff has to go !!! Otherwise I am cutting it up and throwing it away email ttastage2@yahoo.com

11-09-2007, 11:30 AM	#4 (permalink)
FLR Livin' Like A Refugee Join Date: Mar 2003 Location: Bear, Delaware Posts: 2,285	I went 12.39 on pump gas & Razor's alchy at Buick Day. That was on 20° of timing and throught the stock elbow, DP, and Hooker exhaust. That was also with the leaking, original injectors; and a NON-ALKY chip.... I've since got to 009s with a TT alchy chip, and a THDP. Also ported the comp. housing for more flow. Should run damn near 12.0/11.9 next week at Cecil. We'll see what happens. __________________ Scott Jackson aka "ScoJack" MAGNA member & Meth supplier '86 GN... Mild mods & Razors w/ Limited Bronsonian Modification. 11.98@111 with a 1.64 60' STOCK TURBO, IC, CAM, CONVERTOR... THROUGH THE EXHAUST!!!! '94 Silvy K1500 5.7/4L60E Some mods... Goes where chick cars cain't...

11-18-2007, 02:23 AM	#7 (permalink)
turboeric Registered User Join Date: Oct 2004 Location: Bloomsburg, PA Posts: 52	WWW.ALKYCONTROL.COM __________________ 86 GN 86 T-Type 96 Toyota 4-Runner limited MAGNA member

11-12-2007, 12:28 PM	#5 (permalink)
forzfed Registered User Join Date: Jul 2001 Location: Winterpeg Posts: 5,543	Alky rocks! I cranked the alky as high as it would go like Julio said and gained 3mph. On an unopen motor with a TE-44 and V4, I went 12.0@115.5mph with a 2.0 60ft on 18' of timing, through the stock exhaust system.

11-17-2007, 06:46 PM	#6 (permalink)
Reaper Registered User Join Date: Oct 2007 Location: Panama City FL. Posts: 21	can I get a link to the Razor site?

11-20-2007, 08:57 PM	#8 (permalink)
Turbosixx DSR Mutherfuker! Join Date: Jan 2007 Location: Wonkavator Posts: 775	I've been 11.80 @124 on razor's single nozzle. Best ET was an 11.06 on nitto's. I'd say it works. Stock shortblock, roller cam, champion heads and BB6776. __________________ 87 Turbo T Bone stock DSR President Member #001

11-29-2007, 09:15 AM	#9 (permalink)
urntfstenuf Registered User Join Date: Jul 2003 Location: Albuquerque, New Mexico Posts: 667	so what you guys are saying is turn the timng down on TT chip. so if my chip is 23/21 base, set the default's at lower #'s? example- if #'s are set at 128/128 go to 118/118.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A statement we can all agree with regardless of religious, political, or sexual views	Nasty Wendy	The Waiting Room	15	06-22-2006 01:49 PM
And You'd Think It Would Have Been A Canadian With The Anti-Bush Statement.	motorhead	The Waiting Room	9	09-07-2005 01:12 AM
That "gscanatsadmin" guy makes another statement	Buicksx2	Timeout Room	72	08-30-2005 10:32 AM
V6 logo - What's wrong with this statement?	b4black	"Before Black"	7	02-18-2004 07:57 AM
Mission Statement	Steve Wood	The Waiting Room	18	12-19-2003 10:39 PM