Prideful statement for Razor !!!

goneinsix · 11-08-2007, 11:13 PM

Well guy's, iv'e been playing around with my razor alky kit and all we have around here are 1/8 mile track's. I went a few weekend's ago with some buddy's to a track and ran a few passes just playing around and figured out i was gaining a FULL car length thru the 1/8 while spraying alky

, Pump gas and Razor alky kit's RULE!!!!!!!!

If i'm gaing a full car thru the 1/8 recon how much more that would be thru a 1/4? I did that on 22lbs of boost and 20deg of timing, I have since gone to 25lbs of boost and 22.9deg of timing with no knock and car feel's great.

Thank's again Julio for a great product!

turbo nasty · 11-09-2007, 08:50 AM

The best easiest way to unleash the power for sure

Grumpy · 11-09-2007, 08:51 AM

FLR · 11-09-2007, 12:30 PM

I went 12.39 on pump gas & Razor's alchy at Buick Day. That was on 20° of timing and throught the stock elbow, DP, and Hooker exhaust. That was also with the leaking, original injectors; and a NON-ALKY chip....

I've since got to 009s with a TT alchy chip, and a THDP. Also ported the comp. housing for more flow. Should run damn near 12.0/11.9 next week at Cecil. We'll see what happens.

forzfed · 11-12-2007, 01:28 PM

Alky rocks! I cranked the alky as high as it would go like Julio said and gained 3mph. On an unopen motor with a TE-44 and V4, I went 12.0@115.5mph with a 2.0 60ft on 18' of timing, through the stock exhaust system.

Reaper · 11-17-2007, 07:46 PM

can I get a link to the Razor site?

turboeric · 11-18-2007, 03:23 AM

WWW.ALKYCONTROL.COM

Turbosixx · 11-20-2007, 09:57 PM

I've been 11.80 @124 on razor's single nozzle. Best ET was an 11.06 on nitto's. I'd say it works. Stock shortblock, roller cam, champion heads and BB6776.

urntfstenuf · 11-29-2007, 10:15 AM

so what you guys are saying is turn the timng down on TT chip. so if my chip is 23/21 base, set the default's at lower #'s? example- if #'s are set at 128/128 go to 118/118.

11-08-2007, 11:13 PM	#1 (permalink)
goneinsix Registered User Join Date: Jan 2005 Location: pontotoc ms Posts: 71	Prideful statement for Razor !!! Well guy's, iv'e been playing around with my razor alky kit and all we have around here are 1/8 mile track's. I went a few weekend's ago with some buddy's to a track and ran a few passes just playing around and figured out i was gaining a FULL car length thru the 1/8 while spraying alky, Pump gas and Razor alky kit's RULE!!!!!!!! If i'm gaing a full car thru the 1/8 recon how much more that would be thru a 1/4? I did that on 22lbs of boost and 20deg of timing, I have since gone to 25lbs of boost and 22.9deg of timing with no knock and car feel's great. Thank's again Julio for a great product! __________________ 87 Regal Turbo Coupe with "T" Package (GN Interior Not stock but looks good with the gray car) Weld Wheels, stock Heads, Stock Headers, Stock Turbo, Comp Cams BV69 260H Cam & Lifter Kit, 3" downpipe with 3" single exhaust, Caspers Thumbwheel Chip, Turbo Tweak program burnt to #7 setting, Razor Alky, Bradco 3400 Stall, 20lbs Boost, Straight Methanol In Alky Tank, 93 Octane, 42lb Injectors, NO KNOCK YET!! 1/8 ET 8.50 Launching at "0" boost

11-09-2007, 08:50 AM	#2 (permalink)
turbo nasty Boost Sux my Wallet Join Date: Aug 2003 Location: Mississippi Gulf Coast area Posts: 1,117	The best easiest way to unleash the power for sure __________________ 87 GN (3480lbs w/me & 1/2 tank) GT3255E, ESP FMIC, Razors Alky, Turbosaver, TA Headers, THDP w/test, ATR crossflow, TT, 38's, hopped up trans, Pats 10" 3k l/u, QA1r's, UMI Ups (adj) and lows, HR bar, MT DR's. 2003 G35 Coupe Blk on BLk, JDM Clears, 18's, Prem PKG, Lthr, Bose....wifes car 2005 Harleys : Wide Glide & Duece ...Mucho Bling

11-09-2007, 08:51 AM	#3 (permalink)
Grumpy Registered User Join Date: Sep 2000 Location: Andover, Ma Posts: 11,124	__________________ Dan dont run your mouth if you cant run your car 86/87 GN and 89 TTA .. tons of parts !! Time to get out! Stuff has to go !!! Otherwise I am cutting it up and throwing it away email ttastage2@yahoo.com

11-09-2007, 12:30 PM	#4 (permalink)
FLR Livin' Like A Refugee Join Date: Mar 2003 Location: Bear, Delaware Posts: 2,340	I went 12.39 on pump gas & Razor's alchy at Buick Day. That was on 20° of timing and throught the stock elbow, DP, and Hooker exhaust. That was also with the leaking, original injectors; and a NON-ALKY chip.... I've since got to 009s with a TT alchy chip, and a THDP. Also ported the comp. housing for more flow. Should run damn near 12.0/11.9 next week at Cecil. We'll see what happens. __________________ Scott Jackson aka "ScoJack" MAGNA member & Meth supplier '86 GN... Mild mods & Razors w/ Limited Bronsonian Modification. 11.98@111 with a 1.64 60' STOCK TURBO, IC, CAM, CONVERTOR... THROUGH THE EXHAUST!!!! '94 Silvy K1500 5.7/4L60E Some mods... Goes where chick cars cain't...

11-18-2007, 03:23 AM	#7 (permalink)
turboeric Registered User Join Date: Oct 2004 Location: Bloomsburg, PA Posts: 52	WWW.ALKYCONTROL.COM __________________ 86 GN 86 T-Type 96 Toyota 4-Runner limited MAGNA member

11-12-2007, 01:28 PM	#5 (permalink)
forzfed Registered User Join Date: Jul 2001 Location: Winterpeg Posts: 5,567	Alky rocks! I cranked the alky as high as it would go like Julio said and gained 3mph. On an unopen motor with a TE-44 and V4, I went 12.0@115.5mph with a 2.0 60ft on 18' of timing, through the stock exhaust system.

11-17-2007, 07:46 PM	#6 (permalink)
Reaper Registered User Join Date: Oct 2007 Location: Panama City FL. Posts: 21	can I get a link to the Razor site?

11-20-2007, 09:57 PM	#8 (permalink)
Turbosixx DSR Mutherfuker! Join Date: Jan 2007 Location: Wonkavator Posts: 790	I've been 11.80 @124 on razor's single nozzle. Best ET was an 11.06 on nitto's. I'd say it works. Stock shortblock, roller cam, champion heads and BB6776. __________________ 87 Turbo T Bone stock DSR President Member #001

11-29-2007, 10:15 AM	#9 (permalink)
urntfstenuf Registered User Join Date: Jul 2003 Location: Albuquerque, New Mexico Posts: 682	so what you guys are saying is turn the timng down on TT chip. so if my chip is 23/21 base, set the default's at lower #'s? example- if #'s are set at 128/128 go to 118/118.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A statement we can all agree with regardless of religious, political, or sexual views	Nasty Wendy	The Waiting Room	15	06-22-2006 02:49 PM
And You'd Think It Would Have Been A Canadian With The Anti-Bush Statement.	motorhead	The Waiting Room	9	09-07-2005 02:12 AM
That "gscanatsadmin" guy makes another statement	Buicksx2	Timeout Room	72	08-30-2005 11:32 AM
V6 logo - What's wrong with this statement?	b4black	"Before Black"	7	02-18-2004 08:57 AM
Mission Statement	Steve Wood	The Waiting Room	18	12-19-2003 11:39 PM