Anyone else having problems with the shurflo check valve? - Page 2

Turbonics · 04-23-2007, 04:15 PM

Quote:

Originally Posted by coolingmist

You need atleast a 15 psi cracking pressure checkvalve or a solenoid.

So, this means they should be standard & included in any system, correct?

Seems to me, if they're needed, why not get it from the get-go?

Steve Wood · 04-23-2007, 04:41 PM

I think most complete kits include them. One of my cars is a bit flaky when it comes to maintaining alky in the line, and, I was going to replace the valve and try something with a bit more cracking pressure.

Old Buzzard · 04-23-2007, 05:34 PM

Quote:

Originally Posted by coolingmist

Good luck everyone. There is too much drama on this forum.

should consider a more "civilized" forum?? Maybe the ricer punks, or some of the LSX gang could accomodate your needs??

stevemon · 04-23-2007, 06:55 PM

If CM receives mail at his address, it doesn't seem too difficult to put a checkvalve in a bubble pack bag or a priority mail box & print out a priority mail prepaid shpg label and charge $5 for shpg. The item will arrive in 2-3 days at any US location and my own shpg experiences with USPS have been excellent.

BTW a similar size & weight item from Full Throttle has a $9.19 shpg cost. My Scanmaster II shpg charge 8 or 9 yrs ago was $9.95.

I only remember that cost b/c I thought it should have been half that much for a pkg weighing less than 12 oz.
Funny I never see anyone complain about Mikes shpg charges.

Steve Wood · 04-23-2007, 07:42 PM

I would if I was going to buy something cheap that weighed less than an ounce..but, then, that is just me. It is not the money, it is the principle. If he had not included the last sentence, I would not have taken offense.

I would have probably bought two, instead.

He aggravated me, I aggravated him...He said he was sorry, and I said no problem.

Zap · 04-23-2007, 10:04 PM

OK, glad I could help.

Ttype83 · 04-23-2007, 10:56 PM

Quote:

Originally Posted by Steve Wood

I would if I was going to buy something cheap that weighed less than an ounce..but, then, that is just me. It is not the money, it is the principle. If he had not included the last sentence, I would not have taken offense.

I would have probably bought two, instead.

He aggravated me, I aggravated him...He said he was sorry, and I said no problem.

I just had to order a plastic bushing for my lawnmower...1.99 part, 9.95 for shipping

I ordered 2 ...same charge for shipping

04-23-2007, 06:55 PM	#19 (permalink)
stevemon Free Information Kits Join Date: Sep 2000 Location: Jamaica Pass, Ok Posts: 3,906	If CM receives mail at his address, it doesn't seem too difficult to put a checkvalve in a bubble pack bag or a priority mail box & print out a priority mail prepaid shpg label and charge $5 for shpg. The item will arrive in 2-3 days at any US location and my own shpg experiences with USPS have been excellent. BTW a similar size & weight item from Full Throttle has a $9.19 shpg cost. My Scanmaster II shpg charge 8 or 9 yrs ago was $9.95. I only remember that cost b/c I thought it should have been half that much for a pkg weighing less than 12 oz. Funny I never see anyone complain about Mikes shpg charges. Attached Thumbnails __________________ stevemonroe@cox.net 1986 GN, 11.80 @ 114, stock turbo. Now in my God sons care. 1989 TTA #10, Sold 1967 Buick Spl. GS Clone, Sold 1957 Buick Special 2nd new Buick in the family (sold) 1950 Special. Families 1st new Buick. Got the Bling Grill 2006 Sissy Motorscooter DIY Alcohol Injection 62 mm Throttle Bodys Liberalism faltered when it turned out it could not cope with truth. D. Moynihan Some in my party threaten to send a message that they don't know a just war when they see it, and more broadly that they're not prepared to use our military strength to protect our security and the cause of freedom. Joe Lieberman Somehow liberals have been unable to acquire from life what conservatives seem to be endowed with at birth: namely, a healthy skepticism of the powers of government agencies to do good. Daniel Moynihan When we are planning for posterity, we ought to remember that virtue is not hereditary. T. Paine

04-23-2007, 10:04 PM	#21 (permalink)
Zap FU FRANK FELDMAN Join Date: May 2001 Location: Sylvan's Poop Ranch Posts: 21,489	OK, glad I could help. __________________ Where were you during the great Obama Depression? Last edited by Zap : 04-23-2007 at 10:04 PM. Reason: Screw you!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gm part numbers	Vicgn	Buick V6 Turbo Tech	11	02-24-2007 01:04 AM
where can i get a remote vacuum block and check valve	85 ttypewh1	Buick V6 Turbo Tech	2	11-26-2005 08:22 AM
Plumbing check valve inline...	Turboculosis	Buick V6 Turbo Tech	2	03-27-2003 12:00 AM
Where to get a check valve...	Turboculosis	Buick V6 Turbo Tech	3	03-21-2003 02:11 AM
Where to get Check Valve for PCV?	Orlando_87GN	Buick V6 Turbo Tech	14	02-28-2001 09:39 AM

04-23-2007, 04:41 PM	#17 (permalink)
Steve Wood An American American Join Date: Sep 2000 Location: East of Eden, Texas Posts: 37,158	I think most complete kits include them. One of my cars is a bit flaky when it comes to maintaining alky in the line, and, I was going to replace the valve and try something with a bit more cracking pressure.

04-23-2007, 07:42 PM	#20 (permalink)
Steve Wood An American American Join Date: Sep 2000 Location: East of Eden, Texas Posts: 37,158	I would if I was going to buy something cheap that weighed less than an ounce..but, then, that is just me. It is not the money, it is the principle. If he had not included the last sentence, I would not have taken offense. I would have probably bought two, instead. He aggravated me, I aggravated him...He said he was sorry, and I said no problem.