Thank you Everyone!

coolingmist · 12-12-2006, 11:16 PM

I would like to thank all of you that have shown our company such great support. We signed on because we wanted you guys to know that you have a choice on where you buy your methanol injection systems. I never realized we would have such a great year on this forum. Your support is greatly appreciated.

Our year advertising is now up and we decided to sign back up as a vendor for again because of your support.

Thanks again and happy holidays!

David

Steve Wood · 12-14-2006, 04:10 PM

Thanks for the site support, and, you patience with dealing with all of us!

Have a great holiday season, and a better Next year

GNVYUS 1 · 12-15-2006, 07:10 PM

Badazzbewik · 12-17-2006, 05:06 PM

you guys run a good setup. congrats on your progress

forzfed · 12-18-2006, 06:58 PM

Good to hear everything has gone well! And, Merry Christmas!

12-12-2006, 11:16 PM	#1 (permalink)
coolingmist Turbo Buicks Vendor Join Date: Sep 2004 Location: Atlanta Posts: 158	Thank you Everyone! I would like to thank all of you that have shown our company such great support. We signed on because we wanted you guys to know that you have a choice on where you buy your methanol injection systems. I never realized we would have such a great year on this forum. Your support is greatly appreciated. Our year advertising is now up and we decided to sign back up as a vendor for again because of your support. Thanks again and happy holidays! David __________________ Methanol Water Injection Kits and controllers. www.coolingmist.com

12-15-2006, 07:10 PM	#3 (permalink)
GNVYUS 1 Registered User Join Date: Feb 2004 Location: IL Posts: 856	+1 __________________ Mike 87GN T-Top down 423lbs. Rebuild #2, BLK/BL Paint w/Custom Metal Flares, VPE Stg 3 Heads, 210/215 Roller Cam, TA49, V2 w/Blitz Blow Off, Billet Drum/Input, PI 3400 5disc, T Brake, Inland 3.5" DS, KB Plenum/70mm TB, Razor's Post Turbo Alky Kit, Devils Pre Turbo Alky Kit, 60lb Inj, Denso 280 Pump,-8/-6 SS Fuel Lines, MBC, Pwr Plt, PTE Oil Relocator, Preluber, Z06 Maf, Translator, Volt Master, Poston Headers, THSS 3.5" DP/Test Pipe, SS 2.5" Y Pipe w/No Muffs, PST 2" Drop, Poly Bushings, Boxed Upper/Lower Arms, QA1 Shocks, Vacuum Converted, Aerospace 11" Brakes w/SS lines, Alum Drums, Polished Autodrags 15x8/15x10, Nitto 555R 275/60's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-14-2006, 04:10 PM	#2 (permalink)
Steve Wood An American American Join Date: Sep 2000 Location: East of Eden, Texas Posts: 37,158	Thanks for the site support, and, you patience with dealing with all of us! Have a great holiday season, and a better Next year

12-17-2006, 05:06 PM	#4 (permalink)
Badazzbewik Registered User Join Date: Dec 2006 Location: South FL Posts: 32	you guys run a good setup. congrats on your progress

12-18-2006, 06:58 PM	#5 (permalink)
forzfed Registered User Join Date: Jul 2001 Location: Winterpeg Posts: 5,608	Good to hear everything has gone well! And, Merry Christmas!