OK.. here we go:
ported heads by Bob Stanley in Greensboro N.C.
Applied 206/212 roller
trw pistons
applied dbl pumpers
Precesion F/M IC
TE-66w/p-trim with .63 housing
Richard Lee gate (will only let go to 22psi???)
AC 9", 55lb inj, SMC alky kit
-----------------------------------------------------------------------------------
that run was with no Alky and Sonoco 118 maximal and
the wastegate or something will only let us see 22 psi?
Could it be regulator??
BTW... torque was only 468.1 I guess due to loose converter
also, it uses a modern muscle chip which was running in open loop and he put a switch to ground out the egr valve that when the switch is turned on, it adds 4 more degees of timing...
it made 428 without the extra timing, then 439 with it
Thanks
__________________
Syd...
www.sydwyndr.com