|
i have to check my timeslip for the 1/8, however my 60 foot was 1.63
my combination consists of: a stock 109 block bored .40 over, internally balanced, stock crank and rods, diamond forged pistons, blueprinted and balanced timing cover, comp cams hydraulic roller cam 212 int/ 212 exh @ .50 duration... ported and polished stock heads, 65# injectors, 70mm throttle body, 76mm precision turbo running at 24#'s of boost, internal wastegate....
LT-1 mass air sensor, Alcohol injection, precision air-to-air intercooler, 200R4 tranny rebuilt by Dave Husek, Pro torque 9" converter with 3600 stall... stock 3.42 gears, KYB shocks - kirben rear coils, and 275/60/15 BFG drag radials on stock wheels..
i just recently installed airbags in both rear coils and im about to install a red armstrong double pumper (which Dave Husek has advised me to do).
My combo also consists of a TurboTweak chip, a 2.1 scan master, 2 B&M super coolers - one for oil and one for transmission..Pontiac trans am radiator w/ twin spals cooling fans, terry heusten downpipe 3.5" into dual 3" pipes, and into hooker aerochamber mufflers...
|