TurboBuicks.com - View Single Post

VxTurboxV · 08-24-2008, 02:25 PM

I've got a devils own kit on 2 of my cars, and I've installed it on 3 of my friends cars. They work well.

I had one fitting warp and leak because it was to close to the hot side of the turbo. And one pump leak. I suggest pulling the top off the pump before installing and using some 100% silicone to seal it before installing. It's been a couple years no other problems.

08-24-2008, 02:25 PM	#7 (permalink)
VxTurboxV Registered User Join Date: Oct 2002 Location: Wichita KS Posts: 1,711	I've got a devils own kit on 2 of my cars, and I've installed it on 3 of my friends cars. They work well. I had one fitting warp and leak because it was to close to the hot side of the turbo. And one pump leak. I suggest pulling the top off the pump before installing and using some 100% silicone to seal it before installing. It's been a couple years no other problems. __________________ 86 Rx-7 GXL Hybrid 86 Grand National motor and trans. TRW pistons, Webber ported IRONS, Extender chip,Translator plus,Te-45a, Vig.Torque Conv.(3500), Trans Cooler, 55lb inj's, 10mm Race Wires, Adj. FP Regulator,RJC PP ,FMIC 18x32 spearco bar&plate, Custom 3 inch mandrel DP, postons X-over pipe. deltagate WG, 3.40 rear, WB 02 255 60 MT Progressive alky, 1 m15 nozzle. Best E.T. 10.65 Best MPH 131.4 Still tuning.