| A Raybestos banner rebuild kit has all you need to freshen up the 200 including seals gaskets and washers for a lil over 200 bucks.
But the direct clutches and OD clutches need to be Alto Reds or equiv in perf type frictions additionally to the ones in the kit for perf appl.
Also the banner kit does not come with Teflon sealing rings for the front center support, it has steel ones which most builders frown upon, it does not come with any thrust washers (plastic of babbit) if one is found bad.
Another must is a hardened stator support and either cryoed or billet drum if its going to be tore down.
So for 300 bucks built you did not get anything special as far as parts go
__________________
87 GN (3480lbs w/me & 1/2 tank) GT3255E, ESP FMIC, Razors Alky, Turbosaver, TA Headers, THDP w/test, ATR crossflow, TT, 38's, hopped up trans, Pats 10" 3k l/u, QA1r's, UMI Ups (adj) and lows, HR bar, MT DR's  .
2003 G35 Coupe Blk on BLk, JDM Clears, 18's, Prem PKG, Lthr, Bose....wifes car
2005 Harleys : Wide Glide & Duece ...Mucho Bling
|