TurboBuicks.com - View Single Post

You will not have any problems with SE Turbo, I have not orderd a down pipe just small things. I know Paul the owner and have known him since before he had the shop. He is "good people" and will help you with your car!

__________________

'87GN Forged pistons, ARP rod Bolts and Girdle.Stock block and rods ,full port and polish heads and intake 63mm TB 55lb injectors, stock location 1 1/2 IC, twin wlbro 340 with hotwire kit. RJC alum. pulleys, Custom burn chip,Scan Master,TE66, headers ATR downpie 3" test pipe FlowMaster2 3/4 dual exhaust with Dynomax race bullets. Artcarr 9" 3,000 stall 200 R4 fully built all upgraded parts. 3:42 auburn rear with stock axels.Convo pro wheels, Eibach springs,90/10 up front 50/50 in rear with air bags. BFG drag radials.

'69 Corvette 4-speed small block Alum. heads full port and polish, Victor Jr. intake Mighty Demon 750, Comp solid lifter, custom built 11.6:1 Ross pistons, eagle H-beam Rods, Msd ign, 250 shot of go juice

, 3:73 posi 325/50/15 Mickey T drag radials. weighs in at a whopping 2600bls

It's Never Enough!!!!!!

11-12-2007, 01:11 PM	#8 (permalink)
Amelio Amelio Join Date: Oct 2007 Location: Loganville, GA Posts: 86	You will not have any problems with SE Turbo, I have not orderd a down pipe just small things. I know Paul the owner and have known him since before he had the shop. He is "good people" and will help you with your car! __________________ '87GN Forged pistons, ARP rod Bolts and Girdle.Stock block and rods ,full port and polish heads and intake 63mm TB 55lb injectors, stock location 1 1/2 IC, twin wlbro 340 with hotwire kit. RJC alum. pulleys, Custom burn chip,Scan Master,TE66, headers ATR downpie 3" test pipe FlowMaster2 3/4 dual exhaust with Dynomax race bullets. Artcarr 9" 3,000 stall 200 R4 fully built all upgraded parts. 3:42 auburn rear with stock axels.Convo pro wheels, Eibach springs,90/10 up front 50/50 in rear with air bags. BFG drag radials. '69 Corvette 4-speed small block Alum. heads full port and polish, Victor Jr. intake Mighty Demon 750, Comp solid lifter, custom built 11.6:1 Ross pistons, eagle H-beam Rods, Msd ign, 250 shot of go juice, 3:73 posi 325/50/15 Mickey T drag radials. weighs in at a whopping 2600bls It's Never Enough!!!!!!