[turbofish38]

Well mine finally crapped out after what seems like 15 years of faithfull service. While I was at the boneyard I stumbled across this neat little part that will make your booster look a little cleaner as far as appearance goes. Its a little bracket that holds the vapor filter. It mounts on the opposite side of the check valve. If you run the filter you no longer have to worry about it sitting out in the open looking ugly like it is on a NA G-body. Its from a 85-89 vintage C/H Body GM car. Thats FWD Park Ave/LeSabre. The only hard part, or should I say exspensive part will be the rubber line that attaches to the bottom of the filter. It has a 90 degree bend. The one I used I had laying around and was a discontinued GM part off a Corvette. I think AutoZone and NAPA carry them as well. If not you can use the Park Ave part and use a splice to make the hose bigger.