TurboBuicks.com - View Single Post - Anyone ever turbo a small industrial engine?

Bullnerd · 05-21-2007, 03:05 PM

Thanks for all the input guys.

I did find a site that specializes in briggs v-twins.They do all the old hotrod tricks ,cam,porting,high rpm springs,alum. rods, etc. This is the direction i will probably go.Unless i can find a really small turbo for cheap.

The vanduard engines are oil pressurized so oiling the turbo shouldnt be a problem.

I did find a company(blouch turbo) that makes a small turbo and actually sounds like it would be perfect and easy to do but the price (900$) is a little steep.(specially since i have a stock turbo on my T)

Thanks again.PS if any one sees a mini turbo "fall of the truck" grab it.

05-21-2007, 03:05 PM	#14 (permalink)
Bullnerd Registered User Join Date: Jan 2005 Location: Jersey Posts: 172	Thanks for all the input guys. I did find a site that specializes in briggs v-twins.They do all the old hotrod tricks ,cam,porting,high rpm springs,alum. rods, etc. This is the direction i will probably go.Unless i can find a really small turbo for cheap. The vanduard engines are oil pressurized so oiling the turbo shouldnt be a problem. I did find a company(blouch turbo) that makes a small turbo and actually sounds like it would be perfect and easy to do but the price (900$) is a little steep.(specially since i have a stock turbo on my T) Thanks again.PS if any one sees a mini turbo "fall of the truck" grab it. Attached Thumbnails __________________ 86 t-type with motor on stand in front of it!