Quote:
|
Originally Posted by turbosy Jack,
Strangly enough, I have a 2002 phillips magnavox projection tv that had a problem with the picture shrinking to about half size and then coming back to normal every few seconds. I took it apart a year ago, got online and diagnosed a bad IC in the circuit board. I ordered the IC, soldered it in, and voila, its been running fine since. I wish I could do the same for this coolingmist controller. After I install the Razor kit on my friends syclone, i'll have him do a boost launch and run this junk over. That would be satisfying.
Coolingmist,
So, basically what you are saying is that your controllers in the past were so inferior that you only put a 90 day warranty on them? If I was running a biz and selling a product that I put my name on, I would have put a better warranty on it! About that quick-disconnect connector....do you have that put on for when they fail, the customer can send them back to you more easily?
later
Jordan |
No thats not what I am saying. I clearly said I would have covered it had it not been abused regardless of the 90 day warranty. Now its 1 year. On the quick connect harness you can cut the wires AFTER the clip without a problem. You cut the wires coming off the controller, thats not something I can replace without having it re-assembled to the circuit board. Regardless of that issue, you opened the box so I dont know if the controller was defective or if you opened the box and broke it. Thats the main issue here.
I dont know what to tell you, the controller you sent in was an absolute mess when we received it and it did not ship out that way.
Im happy you found your replacement. Good luck.
David