You probably need a 2" space for the radius of the copper tube bend for the oil pressure gauge behind the body of the gauge itself.
You got that much room in the pod?
If not electrical might be a better choice or a tighter radius on the hose can be done in a pinch, no pun intended. wink
__________________
WE4, 155K, Daily Driver, DBLBBGT70, 55lb.Inj., Pedophile DP, hollow cat.,Schertz Hi-Pro and 3200Protorque, Postons Headers, 2 1/2"SS Ultraflows and pipes, Ex.Ext. alky chip, EGT/Bilsteins, Boxed Cont. arms/Airbags/snubber,Blizzak snows, Nittos 275/60DR, 307, adj.reg./ SMC alky dual, 9 gauges,scamaster and D.Scan,BSTC, translator and 31/2"MAF, V4 inter. DYNO. TESTED!!!
11.93 @ 113.7
GN loaded, car #2. 115K miles. Accufab reg.,Scanmaster, Reds 100 chip, Mease downpipe, Mease 15row stretch IC, hollow cat., ATR ss. 3"crossflow, SMC alky., J.J. 62mm.T.B., RJC power plate, Bilsteins, Moog springs, HR Parts mount and rear arms, Nittos.
"Some Cars Like Lots Of Fuel Pressure and Some Cars Are On Blocks." 12.4 @ 111
|