| If you mtr runs good now ,no need to rebuild .
Add TE-61 turbo
42lb or larger inj's
PTE frt mnt IC
THDP
Nice 2800 stall D5 conv
340 fp
chip of your choice
race gas
slicks
25 psi boost or more
scan tool
fp gauge
Valve springs 90 to 110 seat presure
good timing set (TA set )
9" kn air filter
engine tie down strap
boost gauge 30 psi
RJC plate
No need for translator if your stock mass air meter is good , no need for headers , larger T body ,ported heads or intake,stick with the 3.8 109 block if it is good , no need for aftermarket cam as the stocker will work well , stock oil pump is fine , pre luber is not needed .
HTH
cars in my area run mid to low 11's with above combo
__________________
100% street car ,10.1 @135mph
|